Abstract
Accurate 6D object pose estimation is critical for robotic manipulation in cluttered environments. However, initial estimates often suffer from inaccuracies due to sensor noise or model discrepancies, and standard refinement techniques frequently ignore physical constraints. We present VeREFINE, a framework that integrates pose verification, iterative refinement, and physics simulation into a unified optimization loop. By utilizing a multi-armed bandit approach for resource allocation, VeREFINE achieves state-of-the-art accuracy and significantly improves grasping success rates in real-world scenarios.
Introduction
For a robot to successfully interact with its environment, it must precisely determine the 6D pose of objects. While deep learning has advanced initial pose estimation, these predictions often require refinement to correct for sensor noise and lighting variations. Traditional pipelines typically employ verification and refinement steps, such as Iterative Closest Point (ICP). However, these methods often produce physically implausible results, such as objects intersecting with surfaces or floating in mid-air.
Physics-based refinement has been proposed to address these issues, but it is often computationally expensive and prone to divergence—where small initial errors lead to unstable simulations. VeREFINE addresses these challenges by interleaving physics simulation with iterative refinement and intelligently managing the computational budget across multiple pose hypotheses.
Methodology
VeREFINE consists of three integrated components designed to ensure physical plausibility and computational efficiency:
- Physics-guided Iterative Refinement (PIR): Unlike methods that apply simulation as a post-processing step, PIR interleaves simulation with refinement. A key innovation is the selective use of orientation data from the physics engine. By only updating the object's rotation based on the simulation, the system avoids the translational "jitter" and divergence common in physics-based methods.
- Supervised Iterative Refinement (SIR): To guarantee that each refinement step improves the pose estimate, SIR employs a GPU-accelerated verification score ($\bar{f}$). This score compares rendered depth and normals against actual camera observations. Refined poses are only accepted if they yield a higher verification score than their predecessors.
- Regret-minimizing Iterative Refinement (RIR): To handle cluttered scenes with numerous hypotheses, RIR treats pose refinement as a Multi-armed Bandit (MAB) problem. Using the Upper Confidence Bound (UCB) algorithm, the system prioritizes the most promising candidates, allowing for an "any-time" response within a fixed time budget.
For complex scenes, the framework extends to VeREFINE depth ($VF_d$), which accounts for occlusions and support relationships by processing objects in a structured front-to-back and bottom-up order.
Experimental Results
The framework was rigorously evaluated on standard benchmarks including LINEMOD, Extended APC (xAPC), and YCB-VIDEO, as well as in real-world grasping tasks using a Toyota HSR robot.
Performance and Accuracy
On the LINEMOD dataset, VeREFINE demonstrated a 7.1% improvement in Average Recall (AR) compared to standard refinement techniques. In real-world manipulation tests, the system achieved an 86% grasp success rate, a significant increase over the 62% success rate of standard deep-learning-based refinement. It proved particularly robust for challenging items like foam bricks and bananas.
Computational Efficiency
By implementing verification scores on the GPU, VeREFINE reduces evaluation time to 1-2ms per pose. Consequently, the system is approximately 5x faster than previous state-of-the-art physics-based methods like PHYSIM-MCTS, reducing total processing time per frame from ~30 seconds to under 6 seconds.
Conclusion and Future Work
VeREFINE represents a significant step toward physically-aware robot vision. By combining physics-guided refinement with efficient verification and bandit-based resource management, it provides a robust solution for real-world manipulation. Future research will focus on extending the system to handle unknown objects through shape estimation and adapting to non-planar support structures in complex environments.
Summary updated