Abstract
In the context of web processing machines, the radial geometry of rolls or bobbins, the input material to the machine, must be measured with precision. The control system of the machine requires a measurement of the varying dimension of the bobbins as an input. A web processing machine (WPM) utilizes the rotational speed to regulate the tension of the web within the machine. Consequently, precise radius measurements, for optimal tension control, are of paramount importance. Traditional sensors, e.g., infrared and ultrasonic sensors, lack precision and are unable to detect anomalies. Additionally, their radius measurement is indirect, as these devices essentially function as distance sensors, and thus necessitate a calibration process. Furthermore, as these sensors only measure a single point on the bobbin, the system is vulnerable to localized irregularities and disturbances that could compromise the integrity of the material. This work proposes a novel methodology for measuring the radius of bobbins. A camera system is used in conjunction with Frequency Domain Zero Padding (FDZP) as a sub-pixel technique to ensure high precision. A correction is applied to compensate for the perspective-induced distortion resulting from the camera’s radial viewpoint with respect to the center of the roll. Moreover, the camera possesses the capability to evaluate multiple points on the bobbin, which enables the detection of the aforementioned anomalies at different positions on the bobbin. The system’s validation was conducted in an industrial setting, where it demonstrated a precision that is 6.2 times better than that of conventional sensors. The method ensures real-time performance while remaining low-cost.
Introduction
In Web Processing Machines (WPMs), maintaining precise material tension is critical to prevent stretching, tearing, or wrinkling. Tension regulation relies on knowing the exact radius of the unwinding roll (bobbin), as this dimension dictates the relationship between rotational speed and linear web speed. Traditional methods utilize infrared or ultrasonic distance sensors, which suffer from indirect measurement, single-point vulnerability to surface anomalies, and low precision due to noise. This work introduces a low-cost vision-based system designed to overcome these limitations.
Methodology
The proposed system utilizes a Raspberry Pi 4B and a 12MP camera to capture and process images of the unwinding roll. The processing pipeline involves several key stages, including ROI extraction, bilateral filtering for noise reduction, and Frequency Domain Zero Padding (FDZP) for sub-pixel accuracy.
The system was validated on an industrial-scale WPM setup using "Kerdi" nonwoven fabric. Ground truth was established with a high-precision digital caliper, and performance was benchmarked against industrial optical and ultrasonic sensors. By defining specific Regions of Interest (ROI) for the fixed axle and the material roll, the system can perform self-calibration and multi-point sensing.
Results and Discussion
The vision-based approach demonstrated significant improvements over traditional sensors. Key performance metrics include:
- Precision: 6.2 times better than the ultrasonic benchmark.
- Accuracy: A relative error of 0.022%, an order of magnitude better than the optical (0.220%) and ultrasonic (-0.252%) sensors.
- Noise: Standstill tests showed a normalized standard deviation of 0.022%, significantly lower than the 0.136%–0.169% range of traditional sensors.
The total hardware cost of approximately €250 makes this solution highly competitive against industrial sensors costing over €400 and high-end line scanners that can cost six times as much.
Conclusion and Future Work
This research proves that sophisticated software techniques like FDZP can enable high-precision industrial sensing using low-cost hardware. While the current system operates effectively at 30 FPS, future iterations could leverage more powerful hardware for higher-speed applications. Further work will focus on integrating these measurements into closed-loop tension control and evaluating robustness in harsh industrial environments.
Summary updated