Using Laser Range Data for 3D SLAM in Outdoor Environments

David M. Cole, Paul M. NewmanICRA 2006 · OpenReview

Abstract

Traditional simultaneous localization and mapping (SLAM) algorithms have been used to great effect in flat, indoor environments such as corridors and offices. We demonstrate that with a few augmentations, existing 2D SLAM technology can be extended to perform full 3D SLAM in less benign, outdoor, undulating environments. In particular, we use data acquired with a 3D laser range finder. We use a simple segmentation algorithm to separate the data stream into distinct point clouds, each referenced to a vehicle position. The SLAM technique we then adopt inherits much from 2D delayed state (or scan-matching) SLAM in that the state vector is an ever growing stack of past vehicle positions and inter-scan registrations are used to form measurements between them. The registration algorithm used is a novel combination of previous techniques carefully balancing the need for maximally wide convergence basins, robustness and speed. In addition, we introduce a novel post-registration classification technique to detect matches which have converged to incorrect local minima
BibTeX
@inproceedings{cole2006using,
  author = {David M. Cole and Paul M. Newman},
  title = {{Using Laser Range Data for 3D SLAM in Outdoor Environments}},
  booktitle = {IEEE International Conference on Robotics and Automation},
  year = {2006},
  url = {https://openreview.net/forum?id=ODOIKae1No-},
}

Loading related content...

Figure