Upcycling spent medium-Ni cathodes via novel liquified salt sourcing

Moonsu Yoon, Jin‐Sung Park, Weiyin Chen, Yimeng Huang, Tao Dai, Y.j. Lee, Jiwon Shin, Seungmi Lee, Yongil Kim, Daeyeol Lee, Dong-Hoon Shin, Jaephil Cho, Yanhao Dong, Ju LiEnergy 2025 · DOI

Abstract

A novel liquified-salts-assisted upcycling strategy achieves compositional and morphological upgrading of spent cathodes, offering a scalable pathway for high-performance cathode regeneration with reduced process energy and material waste.

Introduction

The rapid proliferation of electric vehicles (EVs) has brought the challenge of lithium-ion battery (LIB) end-of-life management to the forefront of sustainable energy research. Spent cathodes, particularly medium-nickel varieties like LiNi₀.₅Co₀.₂Mn₀.₃O₂ (NCM523), represent a significant waste stream. Traditional recycling methods, such as pyrometallurgy and hydrometallurgy, are often criticized for their high energy intensity, greenhouse gas emissions, and the generation of hazardous wastewater.

Direct upcycling—restoring and upgrading the cathode's crystal structure and chemistry without complete dissolution—presents a more efficient alternative. However, conventional solid-state upcycling often suffers from poor precursor contact, leading to the formation of inactive "rock-salt" phases on particle surfaces. Researchers at MIT and Tsinghua University have addressed these challenges by developing a "liquified-salts-assisted" (LS-NCM) strategy that transforms spent NCM523 into high-performance, nickel-rich (NCM811) single-crystalline materials.

The Liquified-Salt Strategy

The core innovation of the LS-NCM method lies in the use of a eutectic salt mixture as a reaction medium. By combining LiOH–LiNO₃ with Ni(NO₃)₂·6H₂O, the team created a system that undergoes in-situ liquefaction at remarkably low temperatures.

Conceptual illustration of the liquified-salts-assisted upcycling process, showing the transformation of spent cathode particles within a reactive liquid medium.

The process begins with planetary centrifugal mixing, where frictional heat and the presence of hydrates cause the nickel salt to melt at approximately 57°C. This creates a "quasi-liquid" environment that ensures uniform wetting of the spent cathode particles. Unlike mechanical ball-milling, this liquid-mediated diffusion allows lithium and nickel precursors to penetrate the microstructure effectively. This environment facilitates Ostwald ripening, where smaller grains dissolve and redeposit onto larger ones, driving the morphological reconstruction from polycrystalline clusters to robust single-crystalline particles.

Performance and Structural Integrity

The LS-NCM method significantly improves both the chemistry and the physical structure of the cathode. A major hurdle in upcycling is the migration of nickel ions into lithium sites, forming a performance-degrading rock-salt impurity layer. The LS-NCM process reduces this layer's thickness from ~10 nm (typical in solid-state methods) to just ~2 nm, drastically lowering interfacial resistance and enhancing lithium-ion transport.

Electrochemical testing demonstrated the superiority of this approach. The upcycled LS-NCM cathode achieved a discharge capacity of 198 mAh/g at 0.1C, surpassing the 192 mAh/g seen in solid-state upcycled versions. More importantly, the material exhibited exceptional stability, retaining 94.1% of its capacity after 100 cycles, compared to 77.6% for the solid-state reference. Full-cell tests in 700 mAh pouch cells further validated these results, showing 88.1% capacity retention over 300 cycles.

Sustainability and Life-Cycle Analysis

Beyond performance, the LS-NCM method offers a compelling environmental profile. Life-cycle analysis (LCA) using GREET 2020 and EverBatt 2020 models indicates that the process consumes only 4.94 MJ/kg of energy and emits 0.68 kg CO₂-eq/kg of greenhouse gases. These figures represent a dramatic reduction in environmental footprint compared to traditional smelting and acid-leaching routes.

Conclusion and Future Outlook

The liquified-salts-assisted strategy provides a scalable and efficient pathway for the direct upcycling of spent LIB cathodes. By leveraging the benefits of liquid-phase chemistry without the drawbacks of aqueous processing, the method achieves high-quality single-crystalline NCM811 from degraded NCM523.

Future work will need to address the challenges of feedstock variability, as precise quantification of lithium deficiency in spent powders is required for stoichiometric accuracy. Additionally, scaling the process will necessitate specialized equipment to maintain the strictly controlled atmospheric conditions required for high-nickel materials. Despite these hurdles, the LS-NCM approach marks a significant step toward a circular battery economy.

Summary updated

Abstract

A novel liquified-salts-assisted upcycling strategy achieves compositional and morphological upgrading of spent cathodes, offering a scalable pathway for high-performance cathode regeneration with reduced process energy and material waste.
BibTeX
@inproceedings{yoon2025upcycling,
  author = {Moonsu Yoon and Jin‐Sung Park and Weiyin Chen and Yimeng Huang and Tao Dai and Y.J. Lee and Jiwon Shin and Seungmi Lee and Yongil Kim and Daeyeol Lee and Dong-Hoon Shin and Jaephil Cho and Yanhao Dong and Ju Li},
  title = {{Upcycling spent medium-Ni cathodes <i>via</i> novel liquified salt sourcing}},
  booktitle = {Energy},
  year = {2025},
  doi = {10.1039/d5ee01086a},
}
Figure