Unpacking the Individual Components of Diffusion Policy

Xiu YuanarXiv 2024 · OpenReview

Abstract

Imitation Learning presents a promising approach for learning generalizable and complex robotic skills. The recently proposed Diffusion Policy generates robot action sequences through a conditional denoising diffusion process, achieving state-of-the-art performance compared to other imitation learning methods. This paper summarizes five key components of Diffusion Policy: 1) observation sequence input; 2) action sequence execution; 3) receding horizon; 4) U-Net or Transformer network architecture; and 5) FiLM conditioning. By conducting experiments across ManiSkill and Adroit benchmarks, this study aims to elucidate the contribution of each component to the success of Diffusion Policy in various scenarios. We hope our findings will provide valuable insights for the application of Diffusion Policy in future research and industry.

Introduction

In the field of robotic manipulation, Diffusion Policy has emerged as a powerful framework due to its ability to model multi-modal action distributions and complex behaviors. Despite its success, the architecture is complex, consisting of several interdependent components. Researchers often modify these components—such as replacing the U-Net with a simpler MLP or using single-frame observations—frequently without a clear understanding of how these changes affect performance. This paper addresses this gap through a systematic ablation study, identifying which design choices are essential for specific robotic tasks, ranging from high-precision manipulation to reactive control.

Methods

The study isolates and evaluates five core "pillars" of the Diffusion Policy architecture:

  1. Observation Sequence Input: Utilizing a temporal stack of past frames instead of only the current state.
  2. Action Sequence Execution: Predicting and executing a "chunk" of actions simultaneously to ensure temporal smoothness.
  3. Receding Horizon Control: Predicting a long sequence of future actions but executing only the initial portion before re-planning.
  4. Denoising Network Architecture: Comparing the standard U-Net (or Transformer) against a simpler Multi-Layer Perceptron (MLP).
  5. FiLM Conditioning: Employing Feature-wise Linear Modulation (FiLM) to integrate observations into the denoising process, rather than simple feature concatenation.
Comparison between observation sequence input and single observation input

These components were tested across eight tasks from the ManiSkill (rigid body manipulation) and Adroit (dexterous manipulation) benchmarks. ManiSkill tasks like StackCube and PegInsertionSide require high precision, while Adroit tasks like Hammer and Relocate involve high-dimensional control of a 24-DoF anthropomorphic hand.

Key Results and Insights

The ablation study reveals that the impact of each component varies significantly based on task complexity and control mode.

The Importance of History and Smoothing

Observation history is critical for tasks using "Absolute Control Mode" (global coordinates), as it provides the necessary context for movement. For "Delta Control" (relative movement), single frames are often sufficient. Similarly, executing action sequences (chunking) generally improves performance by 10-20% by smoothing motions. However, in highly reactive tasks like the Adroit Hammer, shorter action horizons can be more effective to maintain responsiveness.

Architecture and Conditioning

The choice of denoising network and conditioning method is paramount for difficult tasks. In the Adroit Relocate task, the U-Net achieved a 64% success rate, whereas the MLP success rate plummeted to 7%. Similarly, FiLM Conditioning proved far more robust than direct input, yielding 64% success compared to nearly 2% for direct concatenation on the same task.

Success rate across all tasks when removing individual components

As shown in Figure 1, removing the "Action Sequence" or "U-Net" components leads to the most significant performance degradation across the aggregated benchmarks, highlighting their role as critical drivers of the policy's success.

Conclusion

This deconstruction of Diffusion Policy demonstrates that while it is a robust framework, its components are not universally essential. For simpler tasks, researchers may opt for lighter architectures like MLPs. However, for complex, high-dimensional, or long-horizon manipulation, the full suite of components—particularly the U-Net architecture and FiLM conditioning—is vital. Future work should extend these findings to vision-based observations and explore the theoretical underpinnings of why FiLM conditioning is so effective in diffusion-based policies.

Summary updated

Abstract

Imitation Learning presents a promising approach for learning generalizable and complex robotic skills. The recently proposed Diffusion Policy generates robot action sequences through a conditional denoising diffusion process, achieving state-of-the-art performance compared to other imitation learning methods. This paper summarizes five key components of Diffusion Policy: 1) observation sequence input; 2) action sequence execution; 3) receding horizon; 4) U-Net or Transformer network architecture; and 5) FiLM conditioning. By conducting experiments across ManiSkill and Adroit benchmarks, this study aims to elucidate the contribution of each component to the success of Diffusion Policy in various scenarios. We hope our findings will provide valuable insights for the application of Diffusion Policy in future research and industry.
BibTeX
@misc{yuan2024unpacking,
  author = {Xiu Yuan},
  title = {{Unpacking the Individual Components of Diffusion Policy}},
  year = {2024},
  eprint = {2412.00084},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2412.00084},
}
Figure