Unleashing the Potential of Networked Tethered Flying Platforms for B5G/6G: Prospects, Challenges, and Applications

Baha Eddine Youcef Belmekki, Mohamed‐Slim AlouiniarXiv 2020 · DOI · arXiv

Abstract

Researchers are currently speculating about what the role of beyond fifth-generation (B5G) or sixth generation (6G) wireless systems will be. Several use cases and applications are proposed, ranging from enhanced mobile broadband communications and massive ultra-reliable low-latency Communication to holographic telepresence and tactile communications. One crucial and pivotal prospect of 6G is worldwide connectivity. Today, nearly 4 billion people do not have access to an internet connection. 6G not only intends to hyper-connect the already connected, but to bridge the digital divide by connecting the unconnected. For that purpose, 6G architectures will integrate airborne communications as they are considered key enablers for the next generation of wireless systems. Airborne communications can be done via free-flying platforms and tethered flying platforms. Free-flying platforms, such as unmanned aerial vehicles (UAVs) and high-altitude platforms (HAPs) have received great interest during the last decade. However, they lack endurance and backhaul capacity. Networked Tethered Flying Platforms (NTFPs), on the other hand, are enjoying the benefits of free-flying platforms while overcoming their limitations by providing a continuous supply of power and data via the tether. They are also cost-efficient and have good green credentials. Tether platforms have a wide range of applications beyond communications, such as energy harvesting, entertainment, science, research, public safety, disaster relief, government, and defense. In this survey paper, we intend to provide an extensive and comprehensive overview of NTFPs.

Introduction

The transition to beyond fifth-generation (B5G) and sixth-generation (6G) wireless systems is driven by the need for hyper-connectivity. While 5G focused on urban density, 6G aims to bridge the digital divide, reaching the nearly 4 billion people currently without internet access. Terrestrial infrastructure is often prohibitively expensive in rural areas, and satellite solutions, while broad, suffer from high latency and significant costs.

Airborne communications, specifically free-flying platforms like Unmanned Aerial Vehicles (UAVs) and High-Altitude Platforms (HAPs), have been proposed as a solution. However, these platforms face critical limitations: limited flight endurance due to battery constraints and backhaul bottlenecks. Networked Tethered Flying Platforms (NTFPs) emerge as a transformative alternative, utilizing a physical tether to provide continuous power and high-speed fiber-optic data links.

Taxonomy and Framework

The study provides a comprehensive roadmap for NTFP integration. These platforms are categorized based on their aerodynamic properties into Lighter-than-Air (LTA) systems like balloons and blimps, Heavier-than-Air (HTA) systems like tethered drones and kites, and hybrid systems such as Helikites.

Figure 1: Comprehensive taxonomy and roadmap of the NTFP survey, covering types, components, applications, and modeling perspectives.

The research employs a multi-disciplinary framework, deriving mathematical expressions for coverage area and slant range. By drawing parallels to Low Earth Orbit (LEO) satellite geometry, the authors model how altitude ($h$) and elevation angles ($\theta$) dictate the footprint of these aerial base stations.

Economic and Operational Advantages

One of the most compelling arguments for NTFPs is their economic efficiency. A single NTFP operating at an altitude of 250 meters can provide coverage equivalent to 14 to 16 traditional terrestrial towers. When scaled to 900 meters, a single platform can replace up to 160 towers, potentially reducing capital expenditure (CAPEX) by 90%. Furthermore, operational expenditure (OPEX) is approximately 30% lower than terrestrial clusters due to reduced site rental and maintenance requirements.

Beyond economics, NTFPs offer significant "green" credentials. Replacing dozens of diesel-powered ground stations with a single tethered aerostat drastically reduces the carbon footprint of rural telecommunications. Additionally, these platforms can serve dual purposes, such as energy harvesting via Buoyant Airborne Turbines (BATs) that capture high-altitude wind energy.

Technical Performance and Mission Profiles

The performance of NTFPs is highly dependent on their mission profile, categorized into Tactical, Operational, and Strategic tiers.

Figure 3: Mission profiles for NTFPs, illustrating the relationship between altitude, flight duration, payload capacity, and wind resistance.

As shown in Figure 3, tactical missions at lower altitudes (up to 300m) support smaller payloads for shorter durations, while strategic missions at 5km can support payloads up to 2300kg for a full month. This scalability allows operators to tailor deployments to specific needs, from emergency disaster relief to permanent rural broadband.

Channel Modeling and Propagation

A critical contribution of this work is the synthesis of channel models for both Radio Frequency (RF) and Free-Space Optics (FSO) links. The authors map specific environmental scenarios to accurate fading distributions, such as Rayleigh, Rician, or Málaga, accounting for atmospheric turbulence and weather attenuation. This "one-stop-shop" for propagation models provides a vital reference for future 6G architectural design.

Challenges and Future Directions

Despite their potential, NTFPs face several hurdles. Their mobility is physically constrained by the tether's length, limiting them to a hemispherical radius around an anchor point. Weather sensitivity remains a concern; while more stable than free-flying drones, extreme winds and lightning require sophisticated automated winch systems for safety.

Furthermore, reaching the "High-Altitude" range (15–22 km) with a tether presents a significant materials science challenge, as the tether must be strong enough to support its own weight while remaining conductive. Future research into "Air Anchor Units"—tethering one high-altitude platform to another at a lower altitude—may help navigate complex stratospheric wind currents.

Conclusion

NTFPs represent a pivotal shift in aerial communications. By solving the endurance and backhaul issues of free-flying platforms, they provide a sustainable, cost-effective, and high-capacity solution for the next generation of wireless networks. As 6G moves toward global connectivity, NTFPs are poised to play a central role in connecting the unconnected and supporting the hyper-connected world of tomorrow.

Summary updated

Abstract

Researchers are currently speculating about what the role of beyond fifth-generation (B5G) or sixth generation (6G) wireless systems will be. Several use cases and applications are proposed, ranging from enhanced mobile broadband communications and massive ultra-reliable low-latency Communication to holographic telepresence and tactile communications. One crucial and pivotal prospect of 6G is worldwide connectivity. Today, nearly 4 billion people do not have access to an internet connection. 6G not only intends to hyper-connect the already connected, but to bridge the digital divide by connecting the unconnected. For that purpose, 6G architectures will integrate airborne communications as they are considered key enablers for the next generation of wireless systems. Airborne communications can be done via free-flying platforms and tethered flying platforms. Free-flying platforms, such as unmanned aerial vehicles (UAVs) and high-altitude platforms (HAPs) have received great interest during the last decade. However, they lack endurance and backhaul capacity. Networked Tethered Flying Platforms (NTFPs), on the other hand, are enjoying the benefits of free-flying platforms while overcoming their limitations by providing a continuous supply of power and data via the tether. They are also cost-efficient and have good green credentials. Tether platforms have a wide range of applications beyond communications, such as energy harvesting, entertainment, science, research, public safety, disaster relief, government, and defense. In this survey paper, we intend to provide an extensive and comprehensive overview of NTFPs.
BibTeX
@misc{belmekki2020unleashing,
  author = {Baha Eddine Youcef Belmekki and Mohamed‐Slim Alouini},
  title = {{Unleashing the Potential of Networked Tethered Flying Platforms for B5G/6G: Prospects, Challenges, and Applications}},
  year = {2020},
  eprint = {2010.13509},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2010.13509},
}
Figure