Uncovering avalanche sources via acceleration measurements

Emil Bronstein, Eilon Faran, Ronen Talmon, Doron ShiloNature Communications 2024 · DOI

TL;DR

Researchers have developed a novel experimental method using acceleration measurements to bypass the signal distortion inherent in traditional acoustic monitoring. By "distilling" the true source of deformation avalanches in magnesium, they discovered that many commonly accepted statistical laws in the field are actually artifacts of the measurement system, revealing instead an intrinsic upper bound on deformation speed.

What Problem Does This Paper Address?

When materials deform—think of a metal bending or a crystal snapping into a new shape—they don't always do so smoothly. Instead, they undergo "avalanches": rapid, discrete bursts of plastic deformation. For decades, researchers have studied these events using Acoustic Emission (AE) sensors.

The problem is that an AE sensor doesn't "hear" the source directly. The signal travels through the material, reflecting off surfaces and interfering with itself. This transformation is called the acoustic transfer function. Because this function changes depending on where the avalanche happens inside the sample, the resulting data is "smudged." Features like the duration of an AE signal often tell us more about the geometry of the sample than the physics of the deformation itself. This "double-blind" problem—not knowing the source or the transfer function—has made it nearly impossible to see the true physical characteristics of an avalanche source.

Methods

The authors introduced a clever mechanical setup to neutralize the transfer function. Instead of just sticking a sensor on a sample, they attached one end of a magnesium single-crystal to a small mass (a "stage") equipped with an accelerometer.

Key aspects of their approach include:

  • Constant Transfer Function: By measuring the acceleration of the entire stage-sample system at specific frequency ranges, they ensured the transfer function remained constant regardless of where the avalanche occurred in the sample.
  • Source Modeling: They modeled the avalanche source as a sigmoid function, representing a rapid change in strain.
  • Signal Distillation: By comparing measured signals to a "rapid reference" signal, they could mathematically cancel out the transfer function (via a ratio in the frequency domain) to uncover the underlying source function without needing complex deconvolution.
  • Material Choice: They tested this on deformation twinning in magnesium, a well-studied process where parts of a crystal lattice "flip" orientation under stress.

Datasets

The study relies on original experimental data:

  • Primary Data: 1,648 AE signals and 743 acceleration signals captured across six compression experiments on high-purity (99.99%) magnesium single-crystals.
  • Benchmarks: The authors compared their results against traditional AE power-law distributions and previous studies on twin boundary velocities.

Key Insights and Ideas

  • The "Correlation Illusion": In traditional AE studies, signal amplitude and duration are strongly correlated. This paper reveals that for the actual source, these features are largely unrelated. The correlation seen in AE is an artifact of the transfer function.
  • Intrinsic Time Limits: They found that avalanche sources in magnesium have a characteristic time ($\tau_i$) at the microsecond scale, with a hard upper bound of approximately 37 $\mu$s. This suggests a physical limit to how fast a twin can grow, likely tied to the material's internal kinetics.
  • Dynamic Criticality: While the timing is bounded, the growth rate of the twinned volume follows a power-law distribution. This implies that while there is a "speed limit," the scale of the growth rate is unpredictable and follows the physics of systems at a critical point.
  • Validation of the Sigmoid Model: The uncovered source functions closely matched the theoretical sigmoid shape, validating that acceleration measurements can indeed "see" the raw deformation event.

Key Results

  • Power-Law Exponents: The source amplitudes ($A_i$) followed a power law with an exponent of $\alpha = 1.71$, and the growth rates ($v_i$) followed an exponent of $\alpha = 1.83$.
  • Temporal Resolution: The method achieved a time resolution of approximately 2.9 $\mu$s, significantly sharper than traditional AE methods which often record "durations" lasting milliseconds.
  • Transfer Function Independence: The researchers demonstrated that their method produced consistent source characteristics regardless of the specific reference signal used, proving the robustness of the "constant transfer function" assumption.

Limitations and Future Work

The authors acknowledge that their current setup is optimized for a specific frequency range (up to 60 kHz). While this is perfect for the microsecond-scale events in magnesium twinning, faster or slower processes in other materials might require different mass-spring configurations.

Additionally, the study focused on a single material (magnesium). Future work could apply this "distillation" method to other phenomena like dislocation movement in different alloys or domain switching in ferroelectric materials to see if the "upper bound" on characteristic time is a universal feature of material avalanches. Finally, resolving the exact physical origin of the 37 $\mu$s limit remains an open question for theorists.

Summary updated

Abstract

Avalanche sources describe rapid and local events that govern deformation processes in various materials. The fundamental differences between an avalanche source and its associated measured acoustic emission (AE) signal are encoded in the acoustic transfer function, which undesirably modifies the properties of the source. Consequently, information about the physical characteristics of avalanche sources is scarce and its exposure poses a great challenge. We introduce a novel experimental method based on acceleration measurements, which eliminates the effect of the transfer function and distills the avalanche source. Applying this method to deformation twinning in magnesium shows that the amplitudes and characteristic times of avalanche sources are unrelated by a clear physical law. Conversely, the amplitudes and durations of AE signals are related by a power law, which is attributed to the transfer function. Using our method, we identify and compute a new feature of avalanche sources, which is directly linked to the growth rate of the twinned volume. This feature displays a power-law distribution, implying an unpredicted behavior at dynamic criticality. Simultaneously, the characteristic times of avalanche sources possess an intrinsic upper bound, indicating a predicted limit that relates to the underlying physical process of twinning.
BibTeX
@inproceedings{bronstein2024uncovering,
  author = {Emil Bronstein and Eilon Faran and Ronen Talmon and Doron Shilo},
  title = {{Uncovering avalanche sources via acceleration measurements}},
  booktitle = {Nature Communications},
  year = {2024},
  doi = {10.1038/s41467-024-51622-0},
}

Loading related content...

Figure