Ultraviolet Lasers Realized via Electrostatic Doping Method

X. Y. Liu, C. X. Shan, Hai Zhu, Bohong Li, Mingming Jiang, S. F. Yu, Dazhong ShenScientific 2015 · DOI

Abstract

P-type doping of wide-bandgap semiconductors has long been a challenging issue for the relatively large activation energy and strong compensation of acceptor states in these materials, which hinders their applications in ultraviolet (UV) optoelectronic devices drastically. Here we show that by employing electrostatic doping method, hole-dominant region can be formed in wide bandgap semiconductors, and UV lasing has been achieved through the external injection of electrons into the hole-dominant region, confirming the applicability of the p-type wide bandgap semiconductors realized via the electrostatic doping method in optoelectronic devices.

Introduction

For decades, the development of efficient ultraviolet (UV) light-emitting diodes (LEDs) and lasers has been stymied by a fundamental material science challenge: the "doping asymmetry" of wide-bandgap semiconductors like Zinc Oxide (ZnO) and Gallium Nitride (GaN). While these materials are easily made "n-type" (rich in electrons), creating stable "p-type" (rich in holes) versions is notoriously difficult.

Traditional chemical doping often fails because the energy required to activate "acceptor" atoms is much higher than the available thermal energy at room temperature. Furthermore, these materials tend to "self-compensate"—they naturally create defects that neutralize any holes introduced by dopants. Without a reliable p-type region, creating the p-n junctions necessary for lasers has been an uphill battle. This study presents a novel solution: using electrostatic fields to bypass chemical limitations and create functional p-type regions for UV lasing.

Electrostatic Doping and Device Architecture

The researchers proposed electrostatic doping as a physical workaround to the chemical doping bottleneck. Instead of forcing foreign atoms into the crystal lattice, they used an external electric field to manipulate carrier concentrations. They constructed a field-effect-transistor-like structure consisting of a ZnO thin film (the active semiconductor), an 80 nm MgO layer (the dielectric insulator), and an Au (gold) bar acting as a gate electrode.

Device architecture, energy band diagram, and current-voltage characteristics of the Au/MgO/ZnO structure.

By applying a strong negative bias to the gate, they bent the energy bands of the ZnO at the MgO/ZnO interface. This process repels electrons and attracts holes, creating a "hole-dominant" inversion layer. This layer effectively acts as a p-type region, forming a "quasi p-n junction" with the n-type bulk of the ZnO film. When a voltage is applied between the source and drain, electrons are injected into this hole-rich region, where they recombine to emit UV light. The current-voltage ($I-V$) characteristics show clear rectification under negative gate bias, confirming the formation of this functional junction.

Material Characterization

The success of the device relies heavily on the quality of the ZnO thin films. The synthesized films were subjected to rigorous structural and optical characterization to ensure high crystalline integrity.

Optical and structural characterization of the ZnO thin films, including absorption, photoluminescence, and XRD scans.

X-ray diffraction (XRD) and photoluminescence (PL) measurements confirmed the high crystalline quality and six-fold symmetry of the ZnO films. Hall effect measurements established a baseline electron concentration of $6.0 \times 10^{16} \text{ cm}^{-3}$ and a mobility of $56 \text{ cm}^2\text{V}^{-1}\text{s}^{-1}$, providing the necessary electronic environment for successful inversion layer formation.

Key Results and Lasing Performance

The team successfully demonstrated electrically pumped UV lasing at room temperature. Key performance metrics include:

  • Lasing Threshold: Lasing was observed once the injection current reached a threshold of approximately 0.5 mA, which is among the lowest thresholds reported for UV lasers.
  • Spectral Narrowing: Above the threshold, the broad spontaneous emission (FWHM ~28 nm) collapsed into multiple sharp lasing peaks (FWHM ~0.3 nm) centered around 395 nm.
  • Random Lasing Mechanism: The ZnO film is composed of packed nanocolumns. These columns provide both transverse confinement for light and the "random" optical feedback necessary to sustain lasing without a traditional mirrored cavity.
  • Polarization: The resulting laser light was found to be strongly TM (transverse magnetic) polarized, consistent with the optical gain characteristics of the ZnO structure.

Conclusion and Future Directions

This work demonstrates that electrostatic doping is a viable alternative to chemical doping for wide-bandgap semiconductors, successfully bypassing the self-compensation and activation energy barriers. While the current design relies on a specific gate-controlled architecture and produces random lasing, it opens a promising new pathway for high-performance UV optoelectronics. Future research will likely focus on applying this technique to even wider bandgap materials like GaN or AlN to reach deeper UV wavelengths and integrating the method with traditional resonant cavities for single-mode operation.

Summary updated

Abstract

P-type doping of wide-bandgap semiconductors has long been a challenging issue for the relatively large activation energy and strong compensation of acceptor states in these materials, which hinders their applications in ultraviolet (UV) optoelectronic devices drastically. Here we show that by employing electrostatic doping method, hole-dominant region can be formed in wide bandgap semiconductors, and UV lasing has been achieved through the external injection of electrons into the hole-dominant region, confirming the applicability of the p-type wide bandgap semiconductors realized via the electrostatic doping method in optoelectronic devices.
BibTeX
@inproceedings{liu2015ultraviolet,
  author = {X. Y. Liu and C. X. Shan and Hai Zhu and Bohong Li and Mingming Jiang and S. F. Yu and Dazhong Shen},
  title = {{Ultraviolet Lasers Realized via Electrostatic Doping Method}},
  booktitle = {Scientific},
  year = {2015},
  doi = {10.1038/srep13641},
}
Figure