Ultra-Sensitive Nanofiber Fluorescence Detection in a Microfluidic Chip

Zhiyong Li, Yingxin Xu, Wei Fang, Limin Tong, Lei ZhangSensors 2015 · DOI

TL;DR

Researchers have developed an ultra-sensitive fluorescence sensor by integrating a biconical optical fiber taper with a microfluidic chip. This novel design achieves remarkable detection limits for both a common dye (Rhodamine 6G) and quantum dots, paving the way for more robust and compact chemical and biological sensing applications.

What Problem Does This Paper Address?

Miniaturized fiber-optic sensors offer significant advantages like small footprints, high sensitivity, and low power consumption, making them attractive for various sensing applications. However, existing evanescent wave fluorescence sensors often face challenges with stability and susceptibility to environmental factors, especially when exposed to air or bulky sample chambers. This can lead to issues with surface contamination and reproducibility. The authors aim to address these limitations by creating a more robust and stable sensor platform that leverages the enhanced evanescent field of optical nanofibers within a microfluidic environment.

Methods

The core of this sensor is a biconical taper made from a standard single-mode optical fiber. This taper is fabricated by heating and stretching a section of the fiber, creating a narrow waist (around 720 nm in diameter in this study). This narrow waist significantly enhances the evanescent field – a non-propagating electromagnetic field that extends beyond the fiber core. This enhanced evanescent field is crucial for interacting with analytes in the surrounding medium.

To improve stability and control the sample environment, the biconical taper is embedded within a polydimethylsiloxane (PDMS) microfluidic chip. The fiber is fully encased in PDMS, except for the taper waist, which is exposed to the microchannel. This configuration ensures that only the sensing region is in contact with the sample, while the rest of the fiber is protected, leading to improved stability and reproducibility.

For sample introduction, a slot sample-vial-array configuration is employed. This allows for high-throughput sample handling, enabling rapid sequential introduction and cleaning of samples.

Datasets

Not discussed in the paper. The experiments utilize prepared solutions of Rhodamine 6G (R6G) and quantum dot (QD)-labeled streptavidin at various concentrations.

Key Insights and Ideas

  • Enhanced Evanescent Field for Sensitivity: By using a biconical taper with a sub-wavelength diameter, the evanescent field extending from the fiber core is significantly amplified. This allows for more efficient excitation of fluorescent molecules and collection of emitted light, leading to ultra-high sensitivity.
  • Microfluidic Integration for Stability: Embedding the biconical taper within a PDMS microfluidic chip provides a stable and controlled environment for sensing. This protects the sensitive taper from external contamination and ensures consistent interaction with the sample.
  • Seamless Fiber Optic Connection: The biconical taper acts as a bridge between standard optical fibers and the microfluidic sensing region. This seamless connection simplifies the integration of light sources and detectors, making the system robust and easy to use.
  • High-Throughput Sample Handling: The slot sample-vial-array system allows for rapid sequential introduction and flushing of samples, enabling a high sampling throughput (up to 60 samples/hour).

Key Results

The developed sensor demonstrated:

  • Rhodamine 6G (R6G) detection: A detection limit of 100 pM was achieved for R6G, with a linear response range from 0 to 10 nM.
  • Quantum Dot (QD)-labeled streptavidin detection: A detection limit of 10 pM was achieved for QDs. Considering that each QD is conjugated with 3-5 streptavidins, this translates to a detection limit of 30-50 pM for streptavidin.
  • Excellent Reversibility: The sensor showed excellent reversibility for low concentration samples, with a reproducibility of 3.3% RSD (n=5) in cycling measurements of R6G and ultrapure water.

Limitations and Future Work

  • Potential for Fouling: While the microfluidic integration improves stability, the authors note that if ultrapure water sample transmission intensity cannot reach the original level, extensive flushing with ethanol and air is required to renew the taper waist surface. This suggests that some degree of surface fouling or interaction might still occur over extended use.
  • Future Applications: The authors suggest that this compact and robust sensor platform holds promise for various applications, including ultra-sensitive immunoassay, ELISA, toxin measurement, and pathogen detection. Further exploration into these specific applications would be a natural next step.

Summary updated

BibTeX
@article{li2015ultra,
  author = {Zhiyong Li and Yingxin Xu and Wei Fang and Limin Tong and Lei Zhang},
  title = {{Ultra-Sensitive Nanofiber Fluorescence Detection in a Microfluidic Chip}},
  journal = {Sensors},
  year = {2015},
  doi = {10.3390/s150304890},
}
Figure