Two-dimensional ferroelasticity in van der Waals β’-In2Se3

Chao Xu, Jianfeng Mao, Xuyun Guo, Shanru Yan, Yan‐Cong Chen, Tsz Wing Lo, Changsheng Chen, Dangyuan Lei, Xin Luo, Jianhua Hao, Changxi Zheng, Ye ZhuNature Communications 2021 · DOI

Abstract: Two-dimensional (2D) materials exhibit remarkable mechanical properties, enabling their applications as flexible and stretchable ultrathin devices. As the origin of several extraordinary mechanical behaviors, ferroelasticity has also been predicted theoretically in 2D materials, but so far lacks experimental validation and investigation. Here, we present the experimental demonstration of 2D ferroelasticity in both exfoliated and chemical-vapor-deposited β'-In2Se3 down to few-layer thickness. We identify quantitatively 2D spontaneous strain originating from in-plane antiferroelectric distortion, using both atomic-resolution electron microscopy and in situ X-ray diffraction. The symmetry-equivalent strain orientations give rise to three domain variants separated by 60° and 120° domain walls (DWs). Mechanical switching between these ferroelastic domains is achieved under ≤0.5% external strain, demonstrating the feasibility to tailor the antiferroelectric polar structure as well as DW patterns through mechanical stimuli. The detailed domain switching mechanism through both DW propagation and domain nucleation is unraveled, and the effects of 3D stacking on such 2D ferroelasticity are also discussed.

Introduction

Ferroelasticity is the mechanical analogue to ferromagnetism and ferroelectricity. In a ferroelastic material, the crystal lattice can exist in multiple stable, symmetry-equivalent "strain states." By applying external stress, the material can be "flipped" from one state to another, a property that holds immense potential for flexible nano-electronics and strain engineering. While theorists have long predicted ferroelasticity in 2D materials, experimental proof has remained elusive due to the challenges of finding suitable candidates and developing precise in-situ microscopy techniques to observe domain dynamics in real-time.

Methods

The research team focused on the $\beta'$ phase of Indium Selenide ($\text{In}_2\text{Se}_3$), a van der Waals (vdW) material characterized by a unique "nanostriped" superstructure. Samples were prepared using both mechanical exfoliation and Chemical Vapor Deposition (CVD), reaching thicknesses as low as ~6.6 nm (approximately 7 atomic layers).

STEM image of β'-In2Se3 showing the characteristic 1.4 nm nanostriped superstructure.

To investigate the material's properties, the team employed a multi-scale imaging approach:

  • Scanning Transmission Electron Microscopy (STEM): Used for atomic-scale mapping of displacements causing spontaneous strain.
  • Polarized-Light Microscopy: Utilized to visualize 60° and 120° domain walls across entire flakes via linear dichroism.
  • In-Situ Straining: Flakes were mounted on flexible PET substrates, allowing for controlled uniaxial tensile strain while observing domain switching.

Key Insights and Ideas

The study reveals that ferroelasticity in $\beta'$-In$_2$Se$_3$ is intimately coupled with the material's antiferroelectric distortion. The observed "nanostripes" are the physical manifestation of this coupling.

Comprehensive characterization of β'-In2Se3: (a) STEM image of nanostripes; (b) Atomic displacement map showing antiferroelectric distortion; (c) SAED patterns of β and β' phases; (d) Lattice spacing vs. temperature showing the phase transition.

Key findings include:

  • Low Switching Threshold: Domain switching occurs at external strains $\le 0.5\%$, significantly lower than the $\ge 1\%$ predicted for other 2D materials.
  • 3D Stacking Effects: The researchers found that stacking order (2H vs. 3R) fundamentally changes mechanical behavior. While 2H stacking results in purely 2D in-plane strain, 3R stacking introduces out-of-plane shear, leading to surface wrinkles at domain walls.

Key Results

The study successfully quantified the spontaneous strain in the lattice at approximately 0.49%. The switching mechanism was unraveled, demonstrating that it occurs through both the propagation of existing domain walls and the nucleation of new domains. Furthermore, the material exhibited hysteretic behavior—a "memory" effect where domains do not fully return to their original configuration after strain release—confirming its ferroic nature. Importantly, ferroelasticity was confirmed down to few-layer thickness, proving it is an intrinsic 2D property.

Conclusion and Future Outlook

This work provides the first experimental validation of 2D ferroelasticity in a vdW material. While challenges remain in reaching the true monolayer limit and understanding the microscopic nature of domain wall pinning sites, the discovery opens new avenues for "domain wall engineering." By using strain to manipulate domain walls, researchers may be able to tune exotic properties such as the Quantum Spin Hall effect or topological states, potentially leading to the development of 2D shape-memory materials.

Summary updated

Abstract

Two-dimensional (2D) materials exhibit remarkable mechanical properties, enabling their applications as flexible and stretchable ultrathin devices. As the origin of several extraordinary mechanical behaviors, ferroelasticity has also been predicted theoretically in 2D materials, but so far lacks experimental validation and investigation. Here, we present the experimental demonstration of 2D ferroelasticity in both exfoliated and chemical-vapor-deposited β'-In<sub>2</sub>Se<sub>3</sub> down to few-layer thickness. We identify quantitatively 2D spontaneous strain originating from in-plane antiferroelectric distortion, using both atomic-resolution electron microscopy and in situ X-ray diffraction. The symmetry-equivalent strain orientations give rise to three domain variants separated by 60° and 120° domain walls (DWs). Mechanical switching between these ferroelastic domains is achieved under ≤0.5% external strain, demonstrating the feasibility to tailor the antiferroelectric polar structure as well as DW patterns through mechanical stimuli. The detailed domain switching mechanism through both DW propagation and domain nucleation is unraveled, and the effects of 3D stacking on such 2D ferroelasticity are also discussed. The observed 2D ferroelasticity here should be widely available in 2D materials with anisotropic lattice distortion, including the 1T' transition metal dichalcogenides with Peierls distortion and 2D ferroelectrics such as the SnTe family, rendering tantalizing potential to tune 2D functionalities through strain or DW engineering.
BibTeX
@inproceedings{xu2021two,
  author = {Chao Xu and Jianfeng Mao and Xuyun Guo and Shanru Yan and Yan‐Cong Chen and Tsz Wing Lo and Changsheng Chen and Dangyuan Lei and Xin Luo and Jianhua Hao and Changxi Zheng and Ye Zhu},
  title = {{Two-dimensional ferroelasticity in van der Waals β’-In2Se3}},
  booktitle = {Nature Communications},
  year = {2021},
  doi = {10.1038/s41467-021-23882-7},
}

Loading related content...

Figure