TRITIUM RELEASE CHARACTERISTICS OF Al-Li ALLOYS EXAMINED BY LIQUID SCINTILLATION TECHNIQUE

Hideo Saitô, Y. Ishida, Hiroyuki Yoshida1987 · DOI

TL;DR

This paper investigates how tritium, a radioactive isotope of hydrogen, is released from aluminum-lithium (Al-Li) alloys. The researchers found that the amount of lithium in the alloy significantly impacts how easily hydrogen (and thus tritium) can move within and escape from the material, suggesting that lithium plays a crucial role in how hydrogen is "trapped" within the alloy's structure. This has implications for understanding hydrogen behavior in these advanced materials.

What Problem Does This Paper Address?

Understanding how hydrogen behaves within metal alloys is critical for various applications, particularly in fields like nuclear engineering and materials science where hydrogen embrittlement or permeation can be a concern. Aluminum-lithium alloys are of particular interest due to their lightweight and high-strength properties, making them attractive for aerospace and other demanding applications. However, the presence of lithium can alter the fundamental properties of the aluminum matrix, including its interaction with hydrogen. This paper aims to quantify the release characteristics of hydrogen (using tritium as a tracer) from Al-Li alloys, specifically exploring how variations in lithium concentration and material processing (like heat treatment) influence this release. The goal is to shed light on the mechanisms of hydrogen solubility and mobility within these alloys, which are influenced by the internal microstructure and potential trapping sites.

Methods

The researchers employed a meticulous experimental approach to study tritium release. First, Al-Li alloy specimens of varying lithium content were prepared and subjected to different heat treatments (annealing, aging, and overaging). To introduce tritium into the bulk of the specimens, they utilized an electrolytic charging method in a tritium-water solution. This process involved passing an electric current through the specimen submerged in a tritiated sodium hydroxide solution, effectively doping the alloy with tritium.

The core of the measurement involved liquid scintillation analysis. After tritium charging, the specimens were immersed in a dioxane-based scintillator solution. Tritium, being a beta emitter, emits low-energy radiation that excites the scintillator molecules. This excitation results in the emission of light, which is then detected and quantified by a liquid scintillation counter. The rate of tritium release was monitored over time by periodically renewing the scintillator solution and measuring the increase in counting rate, which directly correlates to the amount of tritium diffusing out of the specimen. This allowed for the estimation of tritium release rates and their dependence on various experimental parameters.

Datasets

Not discussed in the paper. The study relies on experimental measurements from prepared alloy specimens rather than pre-existing datasets.

Key Insights and Ideas

  • Lithium is a key player in hydrogen mobility: The study strongly suggests that lithium concentration directly influences both the solubility and mobility of hydrogen within the Al-Li alloy matrix. Higher lithium content generally leads to increased hydrogen release.
  • Microstructure matters: The observed differences in tritium release based on heat treatment (annealed vs. aged/overaged) point to the importance of the alloy's internal microstructure. Aging processes, which can lead to precipitation of lithium-containing phases, appear to alter hydrogen trapping mechanisms.
  • Tritium as a reliable hydrogen tracer: The use of tritium in liquid scintillation counting proved to be an effective and sensitive method for quantifying hydrogen release from the bulk of the alloy, even at low concentrations.
  • Negligible atmospheric leakage: The experimental setup was designed with safety in mind, including containment within a draft chamber and monitoring of exhaust gases, confirming that tritium leakage to the atmosphere was negligible during the experiments.

Key Results

  • Heat Treatment Effects: Annealed Al-Li specimens exhibited higher tritium release rates compared to aged or overaged specimens. While initial release rates differed significantly, they tended to converge after several days.
  • Lithium Concentration Effects: Increasing lithium concentration in the alloy led to a higher tritium release rate. For instance, Al-3.1wt.%Li showed a more abrupt decrease in release compared to Al-0.24wt.%Li, indicating faster diffusion.
  • Charging Parameters: Tritium release was influenced by charging current density and time. Higher current densities and longer charging times generally resulted in higher tritium concentrations and subsequent release rates. Specimen thickness also played a role, with increased thickness leading to higher release rates up to a certain point.
  • Quantitative Release Rates: Table 2 provides quantitative data on total H+³H concentration as a function of electric current density, with values for pure aluminum, Al-0.24 wt.%Li, and Al-3.1 wt.%Li. For example, under a 5 µA/cm² current density, Al-3.1 wt.%Li showed a total concentration of 55.7 ppm, significantly higher than pure aluminum (10.89 ppm).

Limitations and Future Work

The authors acknowledge that the effect of aging on precipitated Al-Li alloys on tritium release rate is small in the currently studied aged alloys. They suggest that the solid solubility and mobility of mobile hydrogen are functions of lithium concentration in the matrix, and that the effect of tritium concentration itself can be neglected within the range of their experiments. Future work could explore a wider range of aging conditions, investigate the specific trapping sites created by lithium precipitation in more detail, and potentially examine the long-term stability of hydrogen within these alloys under various environmental conditions. Understanding these aspects is crucial for predicting the performance and longevity of Al-Li alloys in hydrogen-rich environments.

Summary updated

Abstract

Hydrogen release characteristics of Al-Li alloys at room temperature were examined by liquid scintillation analysis of tritium which has been doped electrolytically in the bulk specimen. The tritium, release showed quantitatively that both solubility and mobility of hydrogen in the alloy is strong functions of lithium concentration in the matrix suggesting the nature of tritium trapping micro-structures.
BibTeX
@inproceedings{saito1987tritium,
  author = {Hideo Saitô and Y. Ishida and Hiroyuki Yoshida},
  title = {{TRITIUM RELEASE CHARACTERISTICS OF Al-Li ALLOYS EXAMINED BY LIQUID SCINTILLATION TECHNIQUE}},
  booktitle = {Le},
  year = {1987},
  doi = {10.1051/jphyscol:1987363},
}
Figure