Trinity: An Air-Shower Imaging Instrument to detect Ultrahigh Energy Neutrinos

A. N. Otte, A. M. Brown, M. Doro, Abe Falcone, J. Holder, E. G. Judd, P. Kaaret, M. Mariotti, Kohta Murase, I. TaboadaarXiv 2019 · DOI · arXiv

Abstract

Trinity is a proposed air-shower imaging system optimized for the detection of earth-skimming ultrahigh energy tau neutrinos with energies between $10^7$ GeV and $10^{10}$ GeV. Trinity will pursue three major scientific objectives: 1) narrowing in on possible source classes responsible for the astrophysical neutrino flux measured by IceCube; 2) finding the sources of ultrahigh-energy cosmic rays (UHECR) and understanding their composition; and 3) testing fundamental neutrino physics at the highest energies. Trinity utilizes the imaging technique, a mature method successfully employed by the very high-energy gamma-ray (CTA, H.E.S.S., MAGIC, VERITAS) and UHECR (Telescope Array, Pierre Auger) communities.

Introduction

The detection of astrophysical neutrinos by IceCube has opened a new window into the high-energy universe. However, the "ultrahigh energy" (UHE) regime—neutrinos with energies exceeding $10^7$ GeV—remains largely unexplored. These particles are critical for identifying the accelerators of the most energetic cosmic rays and probing physics at energy scales inaccessible to terrestrial colliders. Current instruments are either optimized for lower energy thresholds or lack the specific geometric acceptance required for efficient UHE detection. Trinity is designed to bridge this gap, providing high-resolution arrival directions and energy measurements in the $10^7$ to $10^{10}$ GeV range.

Detection Principle

Trinity employs the "earth-skimming" technique to detect tau neutrinos ($\nu_\tau$). When a UHE $\nu_\tau$ traverses the Earth's crust at a shallow angle, it can interact to produce a tau lepton ($\tau$). Due to its high energy, the tau lepton can travel several kilometers through the rock before emerging into the atmosphere. Once in the air, the tau lepton decays, initiating an extensive air shower of secondary particles. These particles travel faster than the speed of light in air, generating a cone of Cherenkov radiation.

Schematic of earth-skimming tau neutrino detection.

By positioning imaging telescopes on high-altitude sites (2–3 km) and pointing them toward the horizon, Trinity can capture the Cherenkov light from these showers. This imaging approach allows for precise reconstruction of the shower's properties and the original neutrino's trajectory.

Instrument Design and Methodology

The Trinity observatory is proposed as a system of six telescopes providing a full 360° azimuthal coverage. The design leverages Imaging Atmospheric Cherenkov Telescope (IACT) technology, which offers superior angular resolution compared to radio-detection methods.

Key technical innovations include:

  • Wide-Field Optics: Based on the "MACHETE" design, each telescope monitors a field of view of 60° (horizontal) by 5° (vertical).
  • Advanced Sensors: The focal plane cameras utilize Silicon Photomultipliers (SiPMs). SiPMs offer higher photon detection efficiency and greater robustness against accidental sunlight exposure compared to traditional photomultiplier tubes.
  • High-Speed Readout: The system uses the AGET readout electronics, a switch-capacitor-array capable of 100 mega-samples per second, ensuring precise timing and low power consumption.

Performance and Sensitivity

The scientific potential of Trinity is evaluated through extensive Monte Carlo simulations. The instrument is designed to reach a differential sensitivity of approximately $10^{-9}$ GeV cm⁻² s⁻¹ sr⁻¹ over three years of operation.

Projected sensitivity of Trinity compared to existing and future neutrino observatories.

As shown in the sensitivity projections, Trinity effectively fills the "sensitivity gap" between the peak performance of IceCube and the higher-energy thresholds of future radio-based arrays like GRAND. This positioning allows Trinity to test various models of cosmogenic neutrino production, which result from UHECR interactions with the Cosmic Microwave Background (CMB).

Conclusion and Future Outlook

Trinity represents a cost-effective approach to UHE neutrino astronomy. With an estimated construction and three-year operational budget of $7.4 million, it offers a high scientific return by repurposing established imaging technologies for a new energy frontier. While challenges remain—such as managing a 20% duty cycle limited to clear nights and developing precise atmospheric calibration using LIDAR—Trinity provides a viable path toward identifying the sources of the most energetic particles in the universe. Future work will focus on site selection, likely in high-altitude regions of Utah, and formalizing the international collaboration.

Summary updated

Abstract

Trinity is a proposed air-shower imaging system optimized for the detection of earth-skimming ultrahigh energy tau neutrinos with energies between $10^7$ GeV and $10^{10}$ GeV. Trinity will pursue three major scientific objectives. 1) It will narrow in on possible source classes responsible for the astrophysical neutrino flux measured by IceCube. 2) It will help find the sources of ultrahigh-energy cosmic rays (UHECR) and understand the composition of UHECR. 3) It will test fundamental neutrino physics at the highest energies. Trinity uses the imaging technique, which is well established and successfully used by the very high-energy gamma-ray community (CTA, H.E.S.S., MAGIC, and VERITAS) and the UHECR community (Telescope Array, Pierre Auger)
BibTeX
@misc{otte2019trinity,
  author = {A. N. Otte and A. M. Brown and M. Doro and Abe Falcone and J. Holder and E. G. Judd and P. Kaaret and M. Mariotti and Kohta Murase and I. Taboada},
  title = {{Trinity: An Air-Shower Imaging Instrument to detect Ultrahigh Energy Neutrinos}},
  year = {2019},
  eprint = {1907.08727},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/1907.08727},
}
Figure