Treatment of cationic red X-GRL in high-salt printing and dyeing wastewater by an electrocatalytic ozonation system: treatment efficiency and degradation mechanism

Zhiwei Shang, Jingchuan Zhu, Guoyu Zhang, Feng Liu, Jiapeng Zhang, Weirun Li, Wenye Li, Fanbo Zeng, Shuyu Zhao, Hong You, Zhipeng LiRSC 2025 · DOI

TL;DR

Researchers have developed a high-efficiency electrocatalytic ozonation system ($MgMn_xO_y$–GAC/EP) specifically designed to treat hypersaline textile wastewater. The system achieves 100% dye degradation in just 16 minutes and over 90% mineralization within an hour, leveraging a unique synergistic mechanism where high salinity actually enhances the production of reactive oxygen species.

What Problem Does This Paper Address?

The textile industry generates massive volumes of wastewater characterized by two difficult traits: high concentrations of persistent organic dyes (like cationic red X-GRL) and extreme salinity (from salts like NaCl used in the dyeing process).

Traditional biological treatments fail in these environments because high salt concentrations inhibit microbial metabolism. While Advanced Oxidation Processes (AOPs) can break down these dyes, high chloride levels usually act as "scavengers," soaking up the reactive hydroxyl radicals ($\cdot OH$) and reducing treatment efficiency. This paper seeks a way to turn the "salt problem" into an advantage, using the high conductivity of the wastewater to drive an electrocatalytic process that works in tandem with ozone.

Methods

The authors constructed an inner-circulation fluidized bed reactor using a multi-component approach:

  • Novel Catalyst: They synthesized a magnesium-manganese oxide catalyst supported on granular activated carbon ($MgMn_xO_y$–GAC). The magnesium doping was specifically used to stabilize the manganese structure and prevent leaching.
  • Modified Electrode: A graphite felt (GF) cathode was modified with acid etching and $g-C_3N_4$ deposition to improve its ability to perform the two-electron oxygen reduction reaction (ORR), which generates hydrogen peroxide ($H_2O_2$) in situ.
  • Synergistic System: The process combines electrochemical oxidation (EO), $H_2O_2$ production, and catalytic ozonation.
  • Analytical Techniques: The team used Electron Paramagnetic Resonance (EPR) and radical quenching experiments to identify exactly which "chemical bullets" (radicals) were responsible for destroying the dye.

Datasets

As an experimental chemistry paper, the "datasets" consist of controlled laboratory tests on synthetic and simulated industrial wastewaters:

  • Primary Pollutant: Cationic red X-GRL (160 mg/L).
  • Salinity Matrix: NaCl concentrations ranging from 1,500 to 12,000 mg/L.
  • Generalization Tests: The system was also evaluated against other common dyes, including Rhodamine B (RhB), Methylene Blue (MB), and Malachite Green (MG), to prove its versatility.

Key Insights and Ideas

  • Salinity as a Catalyst: Contrary to many AOPs where salt is a hindrance, here it improved performance. Increased salinity boosted the solution's conductivity, which lowered the required voltage and increased the current efficiency for $H_2O_2$ production (reaching 95.53%).
  • The Power of Synergy: The authors calculated a "Synergy Factor" (SF) of 13.04. This means the combined system is over 13 times more effective than the sum of its individual parts (ozonation alone + electrolysis alone).
  • Radical Shift: While most AOPs rely on hydroxyl radicals ($\cdot OH$), this system is dominated by superoxide radicals ($\cdot O_2^-$) and singlet oxygen ($^1O_2$). This is crucial because these species are often less sensitive to chloride scavenging than $\cdot OH$.
  • Chlorine Participation: The system doesn't just ignore the salt; it converts chloride ions into active chlorine radicals ($\cdot Cl$), which provide an additional pathway for degrading complex organic molecules.

Key Results

  • Speed: 100% degradation of the target dye within 16 minutes.
  • Mineralization: 90.8% removal of Total Organic Carbon (TOC) within 60 minutes, meaning the dye wasn't just broken into smaller pieces but largely converted to $CO_2$ and $H_2O$.
  • Energy Efficiency: The specific energy consumption was remarkably low at 0.027 kWh per gram of COD removed.
  • Stability: The catalyst and electrode maintained high performance over five consecutive cycles, with COD removal remaining around 84%, indicating good industrial potential.
  • Versatility: COD removal efficiencies for other dyes (RhB, MB, MG) were all above 86%.

Limitations and Future Work

  • Complex Matrices: The study primarily used synthetic wastewater. Real-world textile effluent contains a "soup" of surfactants, heavy metals, and varying pH levels that might interfere with the catalyst's active sites over longer periods.
  • Scaling: While the fluidized bed reactor is a step toward industrial scale, moving from a 6-liter lab setup to industrial-scale flow rates requires further engineering on mass transfer and ozone utilization efficiency.
  • Catalyst Life: Although five cycles showed stability, long-term (hundreds of hours) studies on manganese leaching are necessary to ensure the treated water doesn't contain secondary heavy metal pollution.

Summary updated

Abstract

High salt concentrations in printing and dyeing wastewaters significantly influence pollutant removal. The function of the electrocatalytic ozonation (MgMn <sub><i>x</i></sub> O <sub><i>y</i></sub> -GAC/EP) system in removing pollutants from high-salt printing and dyeing wastewater was investigated. Under high NaCl concentration, the H<sub>2</sub>O<sub>2</sub> yield in the electrochemical system was maintained at approximately 53 mg L<sup>-1</sup>. Under optimal treatment conditions, the degradation efficiency of cationic red X-GRL in the MgMn <sub><i>x</i></sub> O <sub><i>y</i></sub> -GAC/EP system reached 100% within 16 min, and the mineralization efficiency achieved 90.8% within 60 min. The specific energy consumption of the MgMn <sub><i>x</i></sub> O <sub><i>y</i></sub> -GAC/EP system was 0.027 kW h per gCOD. The SF of the MgMn <sub><i>x</i></sub> O <sub><i>y</i></sub> -GAC/EP system was 13.04, indicating that MgMn <sub><i>x</i></sub> O <sub><i>y</i></sub> -GAC, EO and O<sub>3</sub> had a remarkable synergistic effect in the removal of cationic red X-GRL. The existence of ˙OH, ˙Cl, ˙O<sub>2</sub> <sup>-</sup> and <sup>1</sup>O<sub>2</sub> in the MgMn <sub><i>x</i></sub> O <sub><i>y</i></sub> -GAC/EP system was demonstrated by quenching and electron paramagnetic resonance experiments. Based on these outcomes, the degradation mechanism of cationic red X-GRL in the MgMn <sub><i>x</i></sub> O <sub><i>y</i></sub> -GAC/EP system under high salt conditions was proposed, which was the action mechanism of multiple free radicals mainly dominated by ˙O<sub>2</sub> <sup>-</sup> and <sup>1</sup>O<sub>2</sub>. After repeated experiments, the MgMn <sub><i>x</i></sub> O <sub><i>y</i></sub> -GAC/EP system accomplished a COD removal efficiency of 84%, which signified its relatively high stability. The MgMn <sub><i>x</i></sub> O <sub><i>y</i></sub> -GAC/EP system achieved a COD removal efficiency of approximately 86% for diverse pollutants. Overall, this study revealed that the MgMn <sub><i>x</i></sub> O <sub><i>y</i></sub> -GAC/EP system has novel prospects for the treatment of organic pollutants in high-salt wastewater.
BibTeX
@inproceedings{shang2025treatment,
  author = {Zhiwei Shang and Jingchuan Zhu and Guoyu Zhang and Feng Liu and Jiapeng Zhang and Weirun Li and Wenye Li and Fanbo Zeng and Shuyu Zhao and Hong You and Zhipeng Li},
  title = {{Treatment of cationic red X-GRL in high-salt printing and dyeing wastewater by an electrocatalytic ozonation system: treatment efficiency and degradation mechanism}},
  booktitle = {RSC},
  year = {2025},
  doi = {10.1039/d5ra00939a},
}
Figure