Abstract
Exploiting light beams to carry information and deliver power is mooted as a potential technology to recharge batteries of future generation Internet of things (IoT) and Internet of underwater things (IoUT) devices while providing optical connectivity. Simultaneous lightwave information and power transfer (SLIPT) has been recently proposed as an efficient way for wireless power transfer between communicating terminals. In this article, we provide an overview of the various SLIPT techniques in time, power, and space domains. We additionally demonstrate two SLPIT scenarios through underwater channels. Moreover, we discuss the open issues related to the hardware as well as system deployment in harsh environments.
Introduction
The "Internet of Underwater Things" (IoUT) is a critical frontier for monitoring climate change, marine biodiversity, and offshore industrial infrastructure. However, the primary bottleneck for long-term deployment is energy. Traditional batteries eventually deplete, and the logistical cost of replacing them in deep or remote ocean locations is often prohibitive.
While Radio Frequency (RF) signals are commonly used for wireless power on land, they suffer from extreme attenuation in saltwater. Acoustic waves are reliable for long-range communication but offer very low data rates. Optical communication, particularly in the "blue-green window" where seawater attenuation is minimal, provides the high bandwidth necessary for video and complex sensor data. This research explores Simultaneous Lightwave Information and Power Transfer (SLIPT) as a solution to create truly autonomous, self-powered IoUT devices.
SLIPT Architectural Domains
SLIPT techniques can be categorized into three primary architectural approaches for managing the dual requirements of data and power:
- Time Switching: The receiver alternates between energy harvesting (photovoltaic) and data decoding (photoconductive) modes over discrete time intervals.
- Power Splitting: The incoming light intensity is divided, with one portion directed to charging and the other to signal processing.
- Spatial Splitting: Multiple transmitters or receivers are deployed, with specific units dedicated to power transfer and others to data communication.
The experimental work focuses on Time Switching, leveraging low-cost Silicon solar cells. These cells serve a dual purpose: they act as large-area power harvesters and as high-speed data detectors, simplifying the "pointing and tracking" challenges inherent in underwater laser links. A key innovation is the circuit design that decouples energy harvesting from data transmission, ensuring that data rates are not throttled by the charging hardware.
Experimental Demonstrations and Key Results
The team validated the SLIPT concept through two practical underwater scenarios:
- Self-Powered Sensor Node: In a controlled 1.5m tank environment, a blue laser was used to charge an 840 mW battery over 124 minutes. Once energized, the node successfully received commands at 500 kbit/s and transmitted real-time temperature and turbidity data.
- Self-Powered Camera System: Using a red LED, the researchers charged a 5F supercapacitor in approximately 90 minutes, providing sufficient energy to stream one minute of live video from a submerged camera.
Beyond the lab, the system was tested at Abu Gisha island in the Red Sea. Despite the challenges of a coral reef environment and significant water movement, the device demonstrated the feasibility of self-powered operation in real-world marine conditions.
Challenges and Future Directions
While promising, several hurdles remain for widespread IoUT adoption:
- Bandwidth Constraints: Standard solar cells have limited bandwidth (tens of KHz). Future systems may require advanced modulation formats like M-QAM OFDM to reach Gbit/s speeds.
- Pointing and Tracking: Water turbulence can disrupt narrow laser beams. Robust Pointing, Acquisition, and Tracking (PAT) systems are essential.
- Environmental Interference: Turbidity, salinity, and bubbles cause signal fading. The authors suggest using wavelength diversity (multiple colors) to maintain stable links.
- Non-Line-of-Sight (NLoS): Ultraviolet (UV) light, which scatters more readily, is being explored to enable communication even when a direct line-of-sight is obstructed.
Summary updated