Towards a Better Understanding of Gold Electroless Deposition in Track-Etched Templates

Manuela Leo, Francisco C. Pereira, Ligia Maria Moretto, Paolo Scopece, Stefano Polizzi, Paolo UgoChemistry 2007 · DOI

TL;DR

This paper delves into the intricacies of electroless gold deposition within track-etched polycarbonate membranes, aiming to improve control over the formation of gold nanowires and nanotubes. By systematically investigating the roles of pH and deposition time, the researchers demonstrate how to achieve better control over nanomaterial morphology, crucial for applications like nanoelectrode ensembles.

What Problem Does This Paper Address?

The fabrication of nanomaterials using template-assisted methods, specifically filling the pores of microporous membranes, is a well-established technique for creating high-aspect-ratio nanostructures like nanowires and nanotubes. Gold is a particularly attractive material due to its chemical inertness and ease of functionalization. However, achieving precise control over the morphology (nanowires vs. nanotubes) and minimizing defects in these nanostructures has been challenging. This lack of control can significantly impact the performance of devices fabricated with these nanomaterials, such as nanoelectrode ensembles (NEEs) used in analytical and biosensing applications. The paper addresses the need for a deeper understanding of the electroless gold deposition process, focusing on how key parameters like pH and deposition time influence nucleation, growth, and ultimately, the final nanostructure morphology, especially in small-diameter pores.

Methods

The researchers employed a combination of advanced characterization techniques to analyze the gold nanostructures:

  • Electron Microscopy (SEM, FE-SEM, HR-TEM): Used to visualize the morphology, structure, and size distribution of the gold nanoparticles and nanofibers. HR-TEM was particularly useful for examining crystal structure and defects.
  • Atomic Force Microscopy (AFM): Employed to assess the surface roughness of the membranes after deposition, providing insights into the growth process.
  • UV-Vis Spectroscopy: Utilized to characterize the optical properties of the gold nanoparticles dispersed after dissolving the polycarbonate template.
  • Electrochemical Measurements (Cyclic Voltammetry): Used to evaluate the performance of fabricated nanoelectrode ensembles (NEEs) by probing their response to a redox probe. This allowed for the assessment of NEE quality and the impact of fabrication defects.

The core of their methodology involved modifying the standard electroless gold deposition procedure. A key innovation was the introduction of a "delay time" between the initial activation/sensitization of the membrane and the addition of the reducing agent (formaldehyde). This strategy aimed to separate the gold nuclei formation step from the subsequent growth phase, allowing for more controlled growth on pre-formed nuclei. They also systematically varied the pH of the deposition bath (specifically comparing pH 10 and pH 12) and the deposition time.

Datasets

Not discussed in the paper. The study relies on experimental fabrication and characterization of gold nanostructures within track-etched membranes.

Key Insights and Ideas

  • Separating Nucleation and Growth is Crucial: The most significant finding is that separating the gold nucleation step from the growth phase (by introducing a delay time before adding formaldehyde) dramatically improves the control over NEE fabrication. This leads to a higher percentage of "good" NEEs with more consistent electrochemical behavior.
  • pH Dictates Growth Kinetics: The pH of the electroless bath plays a critical role in the kinetics of gold deposition. Higher pH (e.g., pH 12) leads to faster growth, resulting in the rapid formation of nanofibers. Lower pH (e.g., pH 10) results in slower, more controlled growth, which is more conducive to forming nanotubes, especially in smaller pores.
  • Nanotubes are Elusive in Small Pores: Achieving well-defined nanotubes is particularly challenging in membranes with small pore diameters (≤ 30 nm). In these cases, even with controlled growth, the pores tend to fill completely, forming nanofibers.
  • Gold Nanofibers are Polycrystalline: HR-TEM analysis reveals that the gold nanofibers formed are polycrystalline, composed of multiple differently oriented crystals. This suggests that they originate from multiple nucleation sites within the pore that merge together.
  • Defects Dramatically Impact NEE Performance: Even minor defects in the fabricated NEEs, arising from uncontrolled deposition, can significantly alter their voltammetric response, affecting parameters like peak current and capacitive current.

Key Results

  • Introducing a 30-minute delay time between membrane sensitization and formaldehyde addition increased the percentage of "good" NEEs from 40% to 90%.
  • At pH 10, deposition is slower and more controlled, favoring nanotube formation (especially in larger pores) and resulting in narrower particle size distributions.
  • At pH 12, deposition is faster, leading to quicker nanofiber formation but with a wider particle size distribution.
  • For membranes with 30 nm pores, nanotubes are difficult to form, and nanofibers are typically produced.
  • Gold nanofibers formed have an aspect ratio between 30 and 600.
  • UV-vis spectra of dispersed gold nanoparticles showed characteristic plasmon resonance peaks, with shifts indicating size and shape dependence.

Limitations and Future Work

  • Polycrystalline Structure: The study consistently observed polycrystalline structures in the gold nanofibers. The authors suggest that different methods would be required to obtain single-crystal nanowires.
  • Nanotube Formation in Small Pores: The difficulty in forming well-defined nanotubes in pores smaller than 30 nm remains a significant challenge.
  • Future Work: The paper implies that further optimization of deposition parameters, potentially including different activation chemistries or reducing agents, could lead to better control over morphology and crystal structure. Exploring alternative template materials or pore sizes might also be beneficial for achieving specific nanostructures. The authors' findings provide a strong foundation for future research aimed at precisely tailoring gold nanostructures for advanced applications.

Summary updated

Abstract

The template method for preparing nanomaterials entails synthesis of tubular or fibrillar nanostructures within the pores of a microporous membrane. If the holes are completely filled, solid nanowires result, while a partial filling with a continuous coating gives rise to nanotubes. This paper focused on the study of the parameters controlling electroless gold deposition in track-etched polycarbonate membranes. The structure and morphology of the obtained nanomaterials are examined and compared by a variety of electron microscopies and atomic force microscopy and examined in relation to electrochemical and spectrophotometric results. As far as nanotubes are concerned, problems with obtaining such a nanostructure are observed, in particular when membranes with pore diameters equal to or smaller than 30 nm are used. In the case of nanowires, defects related to fabrication problems are evidenced when they are used to prepare nanoelectrode ensembles (NEEs), because defects dramatically influence their voltammetric behavior. The role of deposition time and pH on gold nucleation and growth is studied in detail. We demonstrate that these parameters indeed determine the formation of nanowires versus nanotubes. In all cases the deposit is started by the formation of gold nuclei on the walls of the previously activated membrane. Then the nuclei grow, until they are bound together to produce the final nanomaterial. A significantly better control of the deposition is achieved by separating the nuclei formation step from the growth process. At pH 10 the nuclei growth is more regular but slower, whereas at pH 12 the process is faster but their size distribution is wider. At pH 10 the formation of nanotubes is better controlled, whereas at pH 12 continuous nanofibers are more quickly formed.
BibTeX
@inproceedings{leo2007towards,
  author = {Manuela Leo and Francisco C. Pereira and Ligia Maria Moretto and Paolo Scopece and Stefano Polizzi and Paolo Ugo},
  title = {{Towards a Better Understanding of Gold Electroless Deposition in Track-Etched Templates}},
  booktitle = {Chemistry},
  year = {2007},
  doi = {10.1021/cm071703j},
}
Figure