Toughening of Epoxy Matrices with Reduced Single-Walled Carbon Nanotubes

Yadienka Martinez‐Rubi, Behnam Ashrafi, Jingwen Guan, Christopher T. Kingston, Andrew Johnston, Benoît Simard, Vahid Mirjalili, Pascal Hubert, Libo Deng, Robert J. YoungACS 2011 · DOI

Abstract

Reduced single-walled carbon nanotubes (r-SWCNT) are shown to react readily at room temperature under inert atmosphere conditions with epoxide moieties, such as those in triglycidyl p-amino phenol (TGAP), to produce a soft covalently bonded interface around the SWCNT. The soft interface is compatible with the SWCNT-free cross-linked cured matrix and acts as a toughener for the composite. Incorporation of 0.2 wt % r-SWCNT enhances the ultimate tensile strength, toughness and fracture toughness by 32, 118, and 40%, respectively, without change in modulus. A toughening rate (dK(IC)/dwt(f)) of 200 MPa m(0.5) is obtained. The toughening mechanism is elucidated through dynamic mechanical analyses, Raman spectroscopy and imaging, and stress-strain curve analyses. The method is scalable and applicable to epoxy resins and systems used commercially.
BibTeX
@inproceedings{martinezrubi2011toughening,
  author = {Yadienka Martinez‐Rubi and Behnam Ashrafi and Jingwen Guan and Christopher T. Kingston and Andrew Johnston and Benoît Simard and Vahid Mirjalili and Pascal Hubert and Libo Deng and Robert J. Young},
  title = {{Toughening of Epoxy Matrices with Reduced Single-Walled Carbon Nanotubes}},
  booktitle = {ACS},
  year = {2011},
  doi = {10.1021/am200523z},
}

Loading related content...

Figure