TL;DR
This paper introduces a novel application of Tomographic Absorption Spectroscopy (TAS) to visualize water vapor (H2O) transport in a non-reactive laminar jet. By leveraging ambient H2O as a tracer and employing a specific absorption line, the researchers successfully mapped the 2D concentration distribution, demonstrating TAS's potential for studying mass transfer in complex gaseous flows.
What Problem Does This Paper Address?
Accurately monitoring and understanding the transport of gaseous species is crucial for various fields, from environmental science to combustion engineering. While laser-based techniques like Tunable Diode Laser Absorption Spectroscopy (TDLAS) offer fast and quantitative measurements, their line-of-sight nature limits their application in non-uniform flows. Tomographic Absorption Spectroscopy (TAS), which combines TDLAS with computed tomography, aims to overcome this by reconstructing 2D or 3D concentration fields. However, applying TAS to complex environments like combustion can be challenging due to interactions between temperature, pressure, and species. This paper addresses the need to validate and advance TAS by applying it to a simpler, non-reactive system – a laminar jet with an inverse H2O concentration gradient – to decouple the influence of fluid flow and better understand mass transfer phenomena.
Methods
The core of this study is the application of Tomographic Absorption Spectroscopy (TAS). The experimental setup involves a near-infrared distributed-feedback (DFB) laser tuned to a specific H2O absorption line around 1368.598 nm. A laminar jet of compressed dry air was generated and injected into the ambient air, creating an inverse concentration gradient of H2O (higher concentration in the ambient, lower in the jet).
The TAS technique involved:
- Line-of-Sight (LOS) Absorption Measurement: The laser beam was directed through the jet at various radial positions and heights. The transmitted intensity was measured to calculate the integrated absorbance using Beer-Lambert's Law.
- Abel Inversion: For the axisymmetric laminar jet, a 1D tomography approach was used. The radial distribution of the absorption coefficient was reconstructed from the LOS integrated absorbances using a Tikhonov-regularized Abel inversion.
- Species Concentration Reconstruction: The reconstructed absorption coefficient was then converted into the mole fraction of H2O, accounting for pressure and temperature-dependent linestrength.
- CFD Simulation: A computational fluid dynamics (CFD) simulation was performed using ANSYS Fluent to model the laminar jet and provide a cross-validation for the experimental TAS results.
Datasets
Not discussed in the paper. The study relies on experimental measurements and CFD simulations.
Key Insights and Ideas
- Ambient H2O as a Tracer: Using the naturally present water vapor in the ambient air as the absorbing species is an elegant way to study the mixing and diffusion of the dry jet into its surroundings without introducing an artificial tracer.
- Decoupling Flow Effects: By studying a non-reactive laminar jet at room temperature, the researchers could isolate the effects of fluid dynamics and mass transfer on the TAS measurements, paving the way for more complex applications.
- Inverse Concentration Gradient: The specific setup with an inverse H2O gradient allowed for the detailed observation of how the dry jet entrains ambient moisture, revealing the diffusion process at the shear layer.
- TAS for Mass Transfer: The study strongly suggests that TAS is a powerful tool for visualizing and quantifying scalar fields and mass transfer processes in gaseous flows, offering a significant advancement over traditional LOS methods.
Key Results
- The study successfully reconstructed the 2D distribution of H2O mole fraction in the laminar jet using TAS.
- The TAS measurements showed good agreement with the CFD simulations, with an uncertainty in the reconstructed H2O mole fraction of approximately ±0.0025.
- The technique effectively captured the H2O concentration gradients within the shear layer of the laminar jet at different heights above the nozzle.
- The recovered ambient H2O mole fraction from TAS was found to be close to the measurement by an electronic thermohydrometer.
Limitations and Future Work
- Signal Noise: The raw absorbance signals exhibited some wave-like noise, potentially from the laser or photodetector. While averaging and filtering were applied, further investigation is suggested to mitigate this.
- Uncertainty: While the overall uncertainty was deemed reasonable, the reconstruction of radial species concentrations is sensitive to noise in the integrated absorbance. The Voigt fitting process and spectral parameters (like linestrength) contribute to this uncertainty.
- Future Work: The authors plan to extend this TAS approach to asymmetric or turbulent flow research and to develop more advanced technologies for complex reactive flows, such as combustion diagnostics. The development of a time-resolved TAS measurement system for unsteady flows is also underway.
Summary updated