Tip-Enhanced Raman Spectroscopy with High-Order Fiber Vector Beam Excitation

Fanfan Lu, Tengxiang Huang, Lei Han, Haisheng Su, Heng Wang, Min Liu, Wending Zhang, Xiang Wang, Ting MeiSensors 2018 · DOI

TL;DR

This paper introduces a novel approach to Tip-Enhanced Raman Spectroscopy (TERS) by utilizing high-order fiber vector beams for excitation. They demonstrate that these specialized beams, which possess stronger longitudinal electric field components, can significantly enhance the TERS signal compared to traditional linearly polarized light, paving the way for more sensitive and efficient nanoscale chemical analysis.

What Problem Does This Paper Address?

Tip-Enhanced Raman Spectroscopy (TERS) is a powerful technique for nanoscale chemical fingerprinting, offering high spatial resolution and sensitivity, even down to the single-molecule level. The intensity of the TERS signal is heavily influenced by the interaction of the excitation light with the metallic tip, particularly the localized surface plasmon resonance (LSPR) and the "lightning rod effect." For optimal signal generation, the electric field component of the excitation light needs to be strongly aligned with the axis of the metallic tip. While previous research has explored radially polarized beams for this purpose, the authors identify a need for more efficient and controllable excitation methods. They aim to investigate the potential of high-order fiber vector beams, which theoretically offer stronger longitudinal field components under tight focusing, as a superior excitation source for TERS.

Methods

The core of this work lies in the generation and application of high-order fiber vector beams. The authors employed an electrically-controlled acoustically-induced fiber grating (AIFG) to convert a fundamental linearly polarized mode (HE₁₁) into higher-order vector modes (HEeven/odd). This process involves tuning the voltage and frequency of an RF driving signal applied to an acoustic transducer to achieve phase matching for mode conversion within a few-mode fiber (FMF).

The experimental setup involved a top-illumination TERS configuration. After generating the vector beams, they were tightly focused onto a gold tip positioned above a sample of 4-PBT (4-thiol-4′-(4-pyridine)biphenyl) adsorbed on an Au(111) surface. The excitation light was focused using a high numerical aperture (NA) micro-objective lens. The Raman signal, locally enhanced by the tip, was then collected and analyzed by a Raman spectrometer. For comparison, the same experiment was conducted using a linearly polarized beam.

Datasets

Not discussed in the paper. The experiments were conducted on a prepared sample of 4-PBT on an Au(111) surface.

Key Insights and Ideas

  • Longitudinal Field is Key: The paper reinforces the understanding that the longitudinal component of the electric field is crucial for efficient TERS signal generation due to its direct interaction with the tip's plasmonic properties.
  • High-Order Vector Beams Excel: Theoretical analysis and experimental results confirm that high-order fiber vector beams (HEeven/odd) possess significantly stronger longitudinal electric field components compared to linearly polarized light when tightly focused.
  • AIFG as a Versatile Generator: The use of an acoustically-induced fiber grating (AIFG) proves to be an effective and tunable method for generating these specialized vector beams directly from a fiber, offering a practical advantage over free-space optics.
  • Improved TERS Sensitivity: The enhanced longitudinal field translates directly into a stronger TERS signal, suggesting that these high-order vector beams can improve the sensitivity of TERS measurements.

Key Results

The study demonstrated that excitation with high-order fiber vector beams (HEeven/odd) resulted in a TERS signal that was 1.6 times stronger than that obtained with a linearly polarized beam (HE₁₁). The signal-to-noise ratios at the prominent Raman peak (1603 cm⁻¹) were also improved, from 8.45:1 for HE₁₁ to 9.34:1 for HEeven/odd illumination. These experimental findings align well with the theoretical predictions of enhanced longitudinal field components in the high-order vector beams.

Limitations and Future Work

The authors acknowledge that while the enhancement is significant, it was weaker compared to some radial beam excitations reported in the literature. They attribute this partly to energy loss during the mode coupling process.

Future work could focus on:

  • Optimizing Optical Configuration: Further improvements could be achieved by using inverted microscopes to better align the focused beam with the tip apex and employing micro-objectives with higher NA for tighter focusing and more efficient signal collection.
  • Polarization Control: The unique polarization properties of these vector beams could be leveraged for polarization-controlled Raman spectroscopy, enabling more sophisticated chemical analysis.
  • Exploring Other High-Order Modes: Investigating other types of high-order vector beams and their potential for TERS enhancement.
  • Application to Diverse Samples: Testing the efficacy of this excitation method on a wider range of samples and in different TERS configurations.

Summary updated

BibTeX
@article{lu2018tip,
  author = {Fanfan Lu and Tengxiang Huang and Lei Han and Haisheng Su and Heng Wang and Min Liu and Wending Zhang and Xiang Wang and Ting Mei},
  title = {{Tip-Enhanced Raman Spectroscopy with High-Order Fiber Vector Beam Excitation}},
  journal = {Sensors},
  year = {2018},
  doi = {10.3390/s18113841},
}
Figure