TL;DR
This paper introduces a novel "Sequence Repetition" (SR) node and an SR node-based fast successive-cancellation (SRFSC) decoding algorithm for polar codes. To further accelerate decoding of general nodes, they propose a threshold-based hard-decision-aided (TA) scheme, achieving significant latency reductions without compromising error correction performance, crucial for low-latency applications like 5G.
What Problem Does This Paper Address?
Polar codes are a powerful error-correcting code that can achieve theoretical channel capacity. However, their standard successive-cancellation (SC) decoding algorithm is inherently sequential, leading to high latency. This latency is a major bottleneck for applications demanding real-time performance, such as the Ultra-Reliable Low-Latency Communication (URLLC) scenario in 5G. While existing methods have focused on parallelizing decoding by identifying special node types in the SC decoding tree, these often lead to degraded error correction performance or increased implementation complexity. This paper aims to bridge this gap by proposing a new class of special nodes and an efficient decoding strategy that significantly reduces latency while maintaining error correction capabilities.
Methods
The core of this work lies in two main contributions:
- Sequence Repetition (SR) Node and SRFSC Decoding: The authors introduce a new class of nodes called "Sequence Repetition" (SR) nodes. These nodes provide a unified description for many existing special node types and are characterized by a specific pattern of descendants in the SC decoding tree. By identifying and efficiently decoding these SR nodes, a new algorithm called SR node-based fast SC (SRFSC) decoding is proposed. This approach allows for a higher degree of parallelism compared to standard SC decoding.
- Threshold-Based Hard-Decision-Aided (TA) Scheme: To accelerate the decoding of "general" nodes (those not falling into the SR category), a novel threshold-based hard-decision-aided (TA) scheme is introduced. This scheme leverages a Gaussian approximation of the Log-Likelihood Ratio (LLR) values and a theoretically derived threshold. When the LLR magnitude exceeds this threshold, a hard decision is made directly, bypassing complex calculations. This TA scheme is then integrated with the SRFSC decoder to create the TA-SRFSC decoding algorithm.
- Multi-stage Decoding: To further mitigate potential error-correction performance loss from the TA scheme, a multi-stage decoding strategy is proposed. This involves an initial TA-SRFSC decoding attempt, followed by an SRFSC decoding attempt if the first fails and a hard decision was made. This approach aims to balance latency reduction with error correction robustness.
Datasets
Not discussed in the paper. The evaluation uses simulated polar codes of specific lengths and rates.
Key Insights and Ideas
- Unified Description of Special Nodes: The SR node concept elegantly unifies several previously identified special node types, simplifying the design of fast decoders.
- Parallelism through SR Nodes: SR nodes, by their structure, allow for parallel processing of multiple bits, directly addressing the sequential bottleneck of SC decoding.
- Thresholding for Latency Reduction: The TA scheme intelligently identifies nodes where a hard decision is reliable, significantly speeding up decoding without substantial error rate penalty. The theoretical derivation of the threshold is a key aspect.
- Trade-off Management: The multi-stage decoding strategy demonstrates a sophisticated approach to managing the inherent trade-off between decoding latency and error correction performance.
- Hardware Efficiency: The proposed methods are shown to be amenable to hardware implementation, leading to practical improvements in clock cycles and operating frequency.
Key Results
- SRFSC Decoder: Achieves a high degree of parallelism without degrading error-correction performance.
- TA-SRFSC Decoder: Reduces decoding latency by up to 57% at Eb/No = 5 dB for a polar code of length 1024 and rate 1/2, compared to SRFSC decoding.
- Hardware Implementation: For a polar code of length 1024, the proposed SRFSC decoder with merging operations (SRFSC*) shows up to an 8% reduction in clock cycles and a 10% improvement in maximum operating frequency compared to state-of-the-art decoders.
- Error Correction Performance: The TA-SRFSC scheme introduces a manageable BLER loss, which is further addressed by the multi-stage decoding strategy. The BLER performance of TA-SRFSC decoding degrades at higher Eb/No values beyond a certain point, a phenomenon explained by the increased reliance on hard decisions.
Limitations and Future Work
- Limitations:
- The TA-SRFSC scheme's error correction performance can degrade at higher Eb/No values due to the increased use of hard decisions.
- The multi-stage decoding strategy, while effective, introduces a slight degradation in error-correction performance due to the addition of CRC bits.
- The exploration of SR node parameter choices for discovering more special nodes is beyond the scope of this work.
- Future Work:
- The authors suggest generalizing the multi-stage decoding strategy to include more than two decoding attempts, potentially incorporating more powerful techniques like SCL decoding for subsequent attempts.
- Future work includes the design of a fast SC list decoder using SR nodes.
Summary updated