Thermally Optimized Polarization-Maintaining Photonic Crystal Fiber and Its FOG Application

Chunxi Zhang, Zhihao Zhang, Xiaobin Xu, Wei Cai2018 · DOI

TL;DR

Researchers have developed a novel, small-diameter polarization-maintaining photonic crystal fiber (PM-PCF) that significantly reduces the temperature-induced drift in fiber optic gyroscopes (FOGs). This improved thermal stability, achieved through careful optimization of the fiber's structure, leads to a FOG prototype with exceptional bias stability and random walk, making it a promising candidate for high-precision navigation and sensing applications.

What Problem Does This Paper Address?

Fiber optic gyroscopes (FOGs) are crucial for precise navigation and sensing, but their performance is often limited by temperature fluctuations. A key challenge is the "Shupe effect," where temperature changes cause phase variations in the light propagating through the fiber, leading to zero-bias drift. Traditional polarization-maintaining (PM) fibers, while good, can exhibit significant Shupe constants, especially in long fiber coils used in high-precision FOGs. This paper addresses the need for a PM fiber with superior thermal stability to overcome this limitation and enable more accurate FOGs.

Methods

The authors employed a multi-pronged approach:

  • Theoretical Optimization: They used the finite element method (FEM) to simulate the optical and thermal properties of solid-core PM-PCFs. This involved analyzing how key parameters like air hole size, spacing, and coating thickness influence the Shupe constant (both the Sn and SL components, related to mode effective index and fiber length changes, respectively).
  • Fiber Design and Fabrication: Based on the simulations, they designed and fabricated a small-diameter PM-PCF with optimized parameters. This involved modifying the cladding and coating diameters to minimize the Shupe constant while maintaining good optical performance (e.g., mode-field diameter matching, birefringence, and low loss).
  • Experimental Characterization:
    • Transmission Loss: Measured using the cutback method.
  • Shupe Constant (S): Measured using a custom-built Mach-Zehnder interferometer that tracks phase changes with temperature variations.
  • FOG Prototype Fabrication: A high-precision FOG prototype was built using the optimized PM-PCF.
  • FOG Performance Testing: The prototype underwent rigorous testing, including room temperature bias stability, angular random walk (ARW), scale factor linearity, and a full temperature test (-40°C to 60°C) to evaluate its performance under varying conditions.

Datasets

Not discussed in the paper. The authors relied on simulations and their own fabricated fiber for testing.

Key Insights and Ideas

  • Structural Optimization is Key: The paper demonstrates that by carefully optimizing the physical structure of the PM-PCF (specifically reducing coating thickness and choosing an appropriate cladding diameter), the Shupe constant can be significantly reduced.
  • Small Diameter, Big Impact: A smaller overall fiber diameter, achieved through optimization, not only reduces the Shupe constant but also allows the fiber coil to reach thermal equilibrium more quickly, further improving FOG performance.
  • PCF Advantage in FOGs: The study highlights that PM-PCFs, with their unique structure and tunable properties, offer a distinct advantage over traditional PM fibers (like panda fibers) for high-precision FOG applications, particularly in terms of thermal stability.
  • Trade-offs Managed: While fiber strength was a concern with PCFs, the authors addressed this by using a precise winding procedure and performing proof tests, showing that the benefits of improved thermal stability outweigh these challenges with proper handling.

Key Results

  • Reduced Shupe Constant: The fabricated small-diameter PM-PCF exhibited a Shupe constant that was 15% lower than that of a commercial NKT PM-1550 PCF.
  • Low Transmission Loss: The fabricated fiber achieved a transmission loss as low as 2 dB/km at 1550 nm.
  • High-Precision FOG Performance:
    • Bias Stability: 0.0023 °/h at room temperature.
  • Angular Random Walk (ARW): 0.0003 °/√h.
  • Scale Factor Error: Less than 1 ppm.
  • Bias Stability over Temperature: Remained below 0.02 °/h across a -40°C to 60°C range without active temperature compensation, which is significantly better than FOGs using panda fibers.

Limitations and Future Work

  • Fiber Strength: The paper notes that PCFs are more sensitive to force than panda fibers, requiring a more precise winding procedure. While they managed this with a specialized winding machine and proof testing, it remains a consideration for practical implementation.
  • Further Optimization: The authors suggest that further optimization of the PCF structure could potentially lead to even lower Shupe constants and improved FOG performance.
  • Long-Term Stability: While thermal stability was a focus, long-term operational stability and reliability of the PCF FOG in various environmental conditions could be a subject for future investigation.

Summary updated

BibTeX
@misc{zhang2018thermally,
  author = {Chunxi Zhang and Zhihao Zhang and Xiaobin Xu and Wei Cai},
  title = {{Thermally Optimized Polarization-Maintaining Photonic Crystal Fiber and Its FOG Application}},
  year = {2018},
  doi = {10.3390/s18020567},
}

Loading related content...

Figure