Thermal-Stress Coupling Optimization for Coaxial through Silicon Via

Dongdong Chen, Yintang Yang, Xianglong Wang, Di Li, Yi Liang, Changqing XuSymmetry 2023 · OpenReview

TL;DR

This paper introduces a novel strategy to optimize the design of coaxial Through-Silicon Vias (TSVs) to manage thermal stress, a critical factor for the reliability of 3D integrated circuits. By combining Finite Element Method (FEM) simulations with Artificial Neural Networks (ANNs) and Particle Swarm Optimization (PSO), the authors demonstrate an efficient way to find design parameters that minimize thermal stress and temperature effects.

What Problem Does This Paper Address?

As semiconductor devices become more complex and densely packed in 3D integrated systems, Through-Silicon Vias (TSVs) are essential for vertical interconnections. However, these TSVs are susceptible to thermal stress and strain caused by temperature fluctuations. This stress can lead to significant reliability issues in the overall integrated system. Traditional methods for optimizing TSV design often rely on iterative FEM simulations and expert experience, which can be time-consuming and may not yield optimal results for controlling thermal-stress distribution. This paper aims to address this challenge by developing an automated and efficient optimization strategy for coaxial TSVs to improve their thermal-stress management and, consequently, their reliability.

Methods

The core of this work is a hybrid approach that combines three key techniques:

  • Finite Element Method (FEM): COMSOL Multiphysics is used to create a detailed FEM model of the coaxial TSV. This allows for the simulation of thermal-stress coupling effects and the analysis of how various design parameters influence performance metrics like peak temperature (PT) and peak stress (PS1, PS2, PS3).
  • Artificial Neural Networks (ANNs): To overcome the computational cost of repeated FEM simulations, ANNs are employed. The FEM simulation data is used to train an ANN model that learns the complex, non-linear mapping relationships between the TSV's design parameters (radii and thicknesses) and its thermal-stress performance indexes. This ANN acts as a fast surrogate model for predicting performance.
  • Particle Swarm Optimization (PSO): A modified PSO algorithm is used for multi-objective optimization. It takes the ANN model's predictions and a defined multi-objective function (balancing desired PT, PS1, PS2, and PS3 values) to iteratively search for the optimal set of design parameters that best meet the performance targets. The PSO algorithm updates particle positions and velocities based on their fitness, aiming to converge on the global optimum.

Datasets

The paper does not explicitly mention pre-existing datasets. Instead, it generates its own dataset through:

  • FEM Simulations: A series of FEM simulations using COMSOL Multiphysics are performed on coaxial TSV models with varying design parameters. These simulations provide the ground truth data for training the ANN.
  • Orthogonal Experiment Design: To efficiently gather simulation data, an orthogonal experimental design was used to reduce the number of required FEM simulations while still covering a representative range of design parameter variations.

Key Insights and Ideas

  • ANNs as Efficient Surrogate Models: The study highlights the effectiveness of ANNs in replacing computationally expensive FEM simulations for predicting thermal-stress performance. This significantly speeds up the optimization process.
  • PSO for Multi-Objective Optimization: The application of a modified PSO algorithm effectively handles the multi-objective nature of the problem, balancing competing performance goals (temperature and various stress components).
  • Design Parameter Sensitivity: The results demonstrate that TSV design parameters have a significant and often complex impact on thermal-stress distribution, underscoring the need for systematic optimization.
  • Coaxial TSV Reliability: The developed strategy shows promise in controlling thermal-stress distribution, which is directly linked to improving the reliability of coaxial TSVs in 3D integrated systems.

Key Results

The developed thermal-stress coupling optimization strategy successfully identified optimal design parameters for coaxial TSVs.

  • Case A (Desired Values): The optimized design parameters (r1, r2, r3, t1, t2, t3) resulted in simulated performance indexes of PT = 323.38 K, PS1 = 85.28 MPa, PS2 = 26.46 MPa, and PS3 = 16.41 MPa. These values closely matched the desired targets (PT = 325 K, PS1 = 85 MPa, PS2 = 25 MPa, PS3 = 16 MPa), with errors ranging from 0.33% to 5.8%.
  • Case B (Different Constraints): Even with different constraints, the optimized parameters yielded results that closely aligned with the desired values, demonstrating the robustness of the method.
  • Computational Efficiency: The ANN model achieved a run time of 0.05 seconds, a dramatic improvement over the FEM software's 170 seconds, significantly reducing development time and cost.

Limitations and Future Work

  • Design Parameter Range: The paper notes that in some cases, the optimized parameters were found near the boundary of the explored design parameter ranges. This suggests that expanding these ranges in future research could lead to further improvements and potentially more robust designs.
  • ANN Model Accuracy: While the ANN model is highly efficient, there's an inherent error between ANN predictions and FEM simulations. Future work could focus on improving ANN accuracy or exploring more advanced surrogate modeling techniques.
  • Material Property Deviations: The authors acknowledge that deviations in material properties during manufacturing can impact actual performance. Minimizing these deviations and potentially incorporating their variability into the optimization process could be a future direction.

Summary updated

Abstract

In this paper, a thermal-stress coupling optimization strategy for coaxial through silicon via (TSV) is developed based on the finite element method (FEM), artificial neural network (ANN) model and particle swarm optimization (PSO) algorithm. In order to analyze the effect of design parameters on the thermal-stress distribution of coaxial TSV, the FEM simulations of coaxial TSV are conducted by COMSOL Multiphysics. The structure of coaxial TSV is symmetric. The mapping relationships between the design parameters and performance indexes are described by ANN models based on the simulation data of FEM. In addition, the multi-objective optimization function is formulated based on the desired performance indexes, and then the design parameters are optimized by the modified PSO algorithm. Based on the optimized design parameters, the effectiveness of the developed method is validated by FEM simulations. The simulated performance indexes agree well with the desired ones, which implies that the design parameters of coaxial TSV can be optimized to control the thermal-stress distribution. Therefore, the thermal-stress coupling optimization of coaxial TSV can achieve thermal-stress management to improve its reliability.
BibTeX
@inproceedings{chen2023thermal,
  author = {Dongdong Chen and Yintang Yang and Xianglong Wang and Di Li and Yi Liang and Changqing Xu},
  title = {{Thermal-Stress Coupling Optimization for Coaxial through Silicon Via}},
  booktitle = {Symmetry},
  year = {2023},
  url = {https://openreview.net/forum?id=VaCZSFe7fB5},
}
Figure