Thermal Stress and Creep Strain Analyses of a 3D IC Integration SiP with Passive Interposer for Network System Application

Sheng-Tsai Wu, John H. Lau, Heng-Chieh Chien, Fang‐Lin Chao, Ra-Min Tain, Li Li, Peng Su, Jie Xue, M. BrillhartIMAPSource 2012 · DOI

Abstract

In this study, the nonlinear thermal stress distributions at the Cu-low-k pads of Moore's law chips and creep strain energy density per cycle at the solder joints of a 3D IC integration system-in-package (SiP) are investigated. At the same time, the warpage of the TSV interposer and reliability assessment of solder joints in the architecture is examined. The analyzed structure comprises one PCB (printed circuit board), one BT (bismaleimide triazene) substrate, one interposer with through silicon vias (TSVs), two DRAM (dynamic random access memory) chips and one high power ASIC (application specific integrated circuit) chip. The high power chip and DRAM chips are supported, respectively on the top-side and bottom-side of the Cu-filled TSV interposer.
BibTeX
@inproceedings{wu2012thermal,
  author = {Sheng-Tsai Wu and John H. Lau and Heng-Chieh Chien and Fang‐Lin Chao and Ra-Min Tain and Li Li and Peng Su and Jie Xue and M. Brillhart},
  title = {{Thermal Stress and Creep Strain Analyses of a 3D IC Integration SiP with Passive Interposer for Network System Application}},
  booktitle = {IMAPSource},
  year = {2012},
  doi = {10.4071/isom-2012-thp14},
}

Loading related content...

Figure