TL;DR
This paper presents a novel auto-cascade refrigerator (ACR) system designed to meet the demanding cooling requirements of large-scale liquid xenon (LXe) dark matter experiments like PandaX-xT. The ACR, utilizing ethanol as a coolant and featuring an improved heat exchanger design, delivers a stable 2.5 kW at 155 K, overcoming the limitations of previous technologies and paving the way for more efficient and scalable experimental setups.
What Problem Does This Paper Address?
The quest for dark matter, particularly through direct detection experiments using liquid xenon, is scaling up significantly. These experiments, such as the planned PandaX-xT with a target of fifty tons of LXe, require substantial and reliable cooling power at cryogenic temperatures (around 178 K) for both the detectors and associated purification systems. Existing refrigeration technologies like pulse tube refrigerators (PTRs) and Gifford-McMahon (GM) refrigerators, while suitable for smaller-scale setups or lower temperatures, suffer from limited cooling capacity, large physical footprints, and a lack of mutual support, making them inadequate for the demands of these next-generation experiments. Furthermore, the specific location of the China Jinping Underground Laboratory (CJPL) presents logistical challenges for sourcing large quantities of liquid nitrogen, a common cooling source. This paper addresses the critical need for a high-power, efficient, and scalable cooling solution for these expanding LXe experiments.
Methods
The core of this work is the development and validation of an Auto-Cascade Refrigerator (ACR). The ACR employs a mixed refrigerant and a single compressor to achieve multistage cascade refrigeration, enabling it to reach temperatures below 160 K. Key innovations in the ACR design include:
- Ethanol as Coolant: Ethanol is chosen as the secondary coolant due to its suitable freezing point and availability.
- Coaxial Heat Exchanger: This design, featuring a star-shaped coolant channel in the inner tube, promotes turbulent flow and minimizes crystal deposition, enhancing heat exchange efficiency even at low temperatures.
- After-Pumping Heat Transfer Scheme: This approach, where the gear pump is placed before the evaporator, allows the heat exchanger to operate at its full potential and mitigates pump-induced heating.
- Multiple Operational Modes: The ACR is designed with various modes (pre-cooling, indirect output, direct output, deicing, heating) to cater to different operational needs and ensure system reliability.
- Centralized Cooling System (CCS): The paper also discusses the design of a CCS that integrates the ACR as the primary cold source, distributing cooling power to multiple experimental components via vacuum-insulated pipelines. This system aims to improve cold energy utilization efficiency and reduce space occupation.
Datasets
Not discussed in the paper. The paper focuses on the design, development, and performance testing of a novel refrigeration system.
Key Insights and Ideas
- ACR as a Scalable Solution: The ACR's ability to achieve significant cooling power at the required temperatures (2.5 kW at 155 K) directly addresses the limitations of existing technologies for large-scale LXe experiments.
- Importance of Heat Exchanger Design: The coaxial heat exchanger's design is crucial for maintaining efficient heat transfer in the presence of ethanol's increasing viscosity at lower temperatures, preventing the transition to laminar flow and ensuring effective cooling.
- Centralized Cooling for Efficiency: A CCS is essential for managing and distributing cooling power effectively across various components of a large experiment, leading to better resource utilization and simplified infrastructure.
- Ethanol's Suitability and Safety Considerations: While ethanol is a viable coolant, its flammability necessitates robust safety measures, including enhanced ventilation and leak detection systems.
- Multi-Mode Operation for Robustness: The inclusion of various operational modes, particularly the deicing mode, demonstrates a focus on system reliability and longevity in a demanding cryogenic environment.
Key Results
- The developed ACR system provides a stable cooling power of 2.5 kW at 155 K.
- The ACR's cooling power exceeds that of typical PTR and GM refrigerators used in previous PandaX experiments.
- The paper discusses the feasibility of a centralized cooling system (CCS) capable of 5 kW at 160 K.
- The ACR's performance curve shows a significant increase in cooling power with rising temperature, reaching up to 6.2 kW at 233 K.
- The ACR's refrigeration efficiency is comparable to other high-performance refrigerators around 170 K, but at a significantly lower cost per unit of cooling power.
Limitations and Future Work
- Temperature Stability: While the ACR can achieve temperatures below 160 K, its inherent operating principle leads to a temperature fluctuation of ±2 K. This is insufficient for the stringent ±0.1 K requirement of the PandaX experiment. To address this, the paper proposes a Cold Head based on ACR (CHACR), which uses a combination of flow regulation and electric heating for precise temperature control.
- Ethanol Flammability: The inherent flammability of ethanol is a significant safety concern, requiring careful implementation of safety protocols and monitoring systems.
- Future Work: The paper suggests that the developed ACR technology and the CCS design can be directly applied to the PandaX-xT experiment and provide valuable references for the design and construction of future underground laboratory infrastructures. Further research into optimizing the CHACR for even greater temperature stability and exploring alternative coolants could also be future directions.
Summary updated