Abstract
In high-speed milling, cutting parameters and coolant flow rate significantly impact the temperature and residual stress distribution of the workpiece, thereby affecting machining quality and tool life. This study employs finite element simulation to investigate the influence of feed rate, spindle speed, milling depth, and coolant flow rate on maximum cutting temperature and residual stress. A three-dimensional thermal-fluid-solid coupling mechanical simulation model was established, utilizing explicit dynamics analysis to simulate the milling process. The results indicate that increasing the feed rate raises temperature, while the increase in shear angle and thermal softening effect reduces internal stress, improving material plastic deformation capability. Higher spindle speeds aid heat dissipation, whereas greater milling depths significantly increase mechanical load. Analysis of coolant flow rate reveals that higher flow rates significantly enhance heat dissipation efficiency by triggering turbulent flow. These findings provide critical references for optimizing milling parameters and cooling strategies.
Introduction
In precision manufacturing, managing heat is a primary challenge. High-speed milling of aluminum alloys generates intense thermal energy that can warp parts, induce residual stress, and drastically reduce tool life. Traditionally, engineers have simulated this cooling process using a "convective heat transfer coefficient"—a simplified mathematical shortcut that assumes predictable coolant behavior. However, real-world machining environments are chaotic, characterized by coolant splashing and high-speed shearing. Fixed coefficients fail to capture these transient dynamics, leading to inaccurate predictions of temperature and stress. This paper addresses this gap by developing a model that treats the coolant as a dynamic fluid rather than a static boundary condition.
Methodology
The researchers utilized the Coupled Eulerian–Lagrangian (CEL) method within the Abaqus FEA platform. This approach allows for a high-fidelity simulation of the complex, real-time interactions between liquid coolant and solid machinery:
- Lagrangian Domain: Used for the solid components, including the milling cutter and the Al6061 workpiece. In this framework, the mesh moves and deforms with the material, which is ideal for tracking internal stress.
- Eulerian Domain: Used for the coolant (water). Here, the mesh remains fixed while the fluid flows through it, allowing the simulation to handle the extreme deformations and splashing of the liquid.
To model how the aluminum actually deforms under heat and pressure, the study employed the Johnson-Cook constitutive model. This model accounts for strain hardening, strain rate effects, and thermal softening, which are vital for capturing material behavior during high-speed machining.
Key Insights and Discussion
The Feed Rate Paradox
A counter-intuitive finding was the relationship between feed rate and stress. While increasing the feed rate raises the tool temperature due to higher material removal rates, it simultaneously decreases residual stress. This occurs because the increased heat triggers a "thermal softening" effect, making the aluminum more plastic and less likely to "trap" internal tension.
The Turbulence Threshold
Cooling efficiency does not follow a linear relationship with flow rate. The study found that increasing coolant flow from 300 mm/s to 800 mm/s yielded minimal benefits. It wasn't until the flow reached 1300 mm/s—triggering a transition to turbulent flow—that cooling efficiency skyrocketed, dropping temperatures by nearly 25%.
Thermal Gradients vs. Absolute Temperature
The research highlights that residual stress is more sensitive to thermal gradients (uneven cooling) than to absolute temperature. If the coolant does not cover the interface uniformly, it can create sharp temperature differentials that increase stress, even if the average temperature of the part decreases.
Key Results
- Spindle Speed: Increasing speed from 4,000 to 8,000 rpm reduced maximum temperature by 7.2°C and residual stress by 8.4%, largely due to faster chip evacuation carrying heat away.
- Milling Depth: This parameter had the most punishing impact. Increasing depth from 0.5 mm to 1.5 mm raised temperatures from 296.49°C to 326.86°C and spiked residual stress from 975.3 MPa to 1141 MPa.
- Coolant Efficiency: At the high-flow turbulent stage (1300 mm/s), the maximum milling temperature dropped to 200.9°C, a significant improvement over the 267.19°C observed at lower flow rates.
Conclusion
The CEL model represents a significant step forward in simulating the complex thermal-fluid-solid interactions in high-speed milling. By moving beyond simplified cooling models, this framework provides a more accurate theoretical basis for optimizing machining parameters. While the findings offer critical references for improving efficiency and tool life, the authors acknowledge that future work must include experimental validation and account for factors like tool wear and microstructural changes in the material.
Summary updated