The superprism effect in lithium niobate photonic crystals for ultra-fast, ultra-compact electro-optical switching

J. Amet, Fadi Baida, Geoffrey W. Burr, M.-p. BernalPhotonics and Nanostructures - Fundamentals and Applications 2007 · DOI

TL;DR

This paper proposes a novel tunable photonic crystal superprism device in lithium niobate for ultra-fast, ultra-compact electro-optical switching. By leveraging the slow-light effect to enhance the electro-optic response, they demonstrate a potential 145-fold improvement in voltage efficiency for angle tuning, paving the way for more efficient optical processing and interconnects.

What Problem Does This Paper Address?

Traditional optical components for wavelength multiplexing/demultiplexing, like passive photonic crystal superprisms, are limited by their static nature and the trade-offs between device size and the number of output channels. While active superprisms offer tunability, achieving significant angle changes with practical applied voltages remains a challenge. This paper tackles the problem of creating a highly efficient, tunable optical switch that can steer light based on both wavelength and applied voltage, with a focus on reducing the required operating voltage for electro-optic tuning.

Methods

The researchers employ a combination of theoretical and numerical methods:

  • Plane-Wave Expansion (PWE): Used to calculate constant frequency dispersion contours and identify initial configurations exhibiting strong ultra-refraction and slow-light propagation. This method helps in mapping out the design space.
  • Finite Difference Time Domain (FDTD) Simulations: Utilized to simulate the actual propagation of light within the photonic crystal structure, verifying the predicted behavior and assessing the performance of the proposed tunable bandpass filter.
  • Modified Pockel's Equation: The standard electro-optic effect equation is modified by introducing a "local field factor" ($f$) to account for the enhanced electro-optic effect observed in nanostructured materials, particularly in the presence of slow light. This modified equation is crucial for predicting voltage requirements.
  • Design Metric: A novel metric is introduced to systematically search for optimal design points that simultaneously exhibit strong ultra-refraction and low group velocity, crucial for efficient electro-optic tuning.

Datasets

Not discussed in the paper. The research relies on theoretical calculations and numerical simulations based on material properties of lithium niobate and the geometry of the photonic crystal.

Key Insights and Ideas

  • Slow-Light Enhancement: The core insight is that the slow-light effect in photonic crystals significantly enhances the electro-optic effect in lithium niobate. This means a much smaller applied electric field can induce a larger change in refractive index, leading to substantial angle steering.
  • Tunable Bandpass Filter: The paper proposes a practical application of the tunable superprism as a three-port tunable bandpass filter, offering flexibility in selecting specific wavelengths.
  • Design Space Exploration: The development of design maps and a specific design metric allows for a systematic search for optimal parameters that balance ultra-refraction and slow-light properties.
  • Trade-offs Near Band-Edge: Operating near the photonic crystal band-edge is crucial for slow light and strong electro-optic enhancement, but it comes at the cost of reduced operating bandwidth and increased insertion losses.

Key Results

  • Significant Voltage Reduction: The proposed slow-light enhanced superprism design shows a potential for a 145-fold improvement in voltage efficiency compared to designs relying solely on ultra-refraction. Specifically, an angle swing of ~105° is predicted with an applied electric field of only 8 V/µm, compared to 660 V/µm for a non-slow-light design.
  • Ultra-Refraction Demonstrated: FDTD simulations confirm that the device can achieve significant ultra-refraction, steering light at angles up to ~59° for a small change in refractive index.
  • Tunable Bandpass Filter Operation: The simulations demonstrate the functionality of the tunable bandpass filter, where the transmitted wavelength band shifts by nearly 80 nm for a change in refractive index from $n=2.1$ to $n=2.2$.
  • Design Maps: The paper presents comprehensive design maps that visualize the trade-offs between group velocity direction and local field factor as a function of input angle and normalized frequency.

Limitations and Future Work

  • Bandwidth and Insertion Loss: The authors acknowledge that operating near the band-edge, while beneficial for voltage efficiency, leads to reduced operating bandwidth and increased insertion losses.
  • Fabrication Challenges: While nanostructuring lithium niobate is possible, achieving precise control over the photonic crystal geometry and waveguide integration remains a practical challenge.
  • Experimental Verification: The paper emphasizes the need for experimental characterization to validate the predicted enhanced electro-optic effect and to quantitatively assess the trade-offs between voltage efficiency, bandwidth, and crosstalk.
  • In-Plane Polarization: The current study focuses on TM polarization; future work will extend the analysis to in-plane polarization.
  • Device Fabrication: The authors suggest fabricating a device using annealed-proton exchanged (APE) lithium niobate waveguides and potentially deep trench etching to improve mode interaction with the holes.

Summary updated

BibTeX
@inproceedings{amet2007superprism,
  author = {J. Amet and Fadi Baida and Geoffrey W. Burr and M.-P. Bernal},
  title = {{The superprism effect in lithium niobate photonic crystals for ultra-fast, ultra-compact electro-optical switching}},
  booktitle = {Photonics and Nanostructures - Fundamentals and Applications},
  year = {2007},
  doi = {10.1016/j.photonics.2007.09.002},
}
Figure