The Shapeshifter: a Morphing, Multi-Agent, Multi-Modal Robotic Platform for the Exploration of Titan (preprint version)

Ali-akbar Agha-mohammadi, Andrea Tagliabue, Stephanie Schneider, Benjamin Morrell, Marco Pavone, Jason Hofgartner, Issa A. D. Nesnas, Rashied B. Amini, Arash Kalantari, Alessandra Babuscia, Jonathan I. LuninearXiv 2020 · arXiv

Abstract

Saturn's moon Titan presents a unique exploration challenge due to its dense atmosphere, low gravity, and diverse geography, ranging from hydrocarbon seas to complex cave systems. This paper proposes "Shapeshifter," a modular robotic platform composed of multiple small, identical agents called "Cobots." These agents can autonomously dock and undock to morph into configurations optimized for flight, rolling, and swimming. By combining the energy efficiency of rolling with the mobility of flight, the Shapeshifter platform offers an all-access solution for planetary exploration with high mission redundancy.

Introduction: The Challenge of Titan

Planetary exploration has traditionally relied on monolithic robots—single, specialized vehicles like rovers or stationary landers. However, Titan’s environment is too varied for any single-domain robot. A rover cannot traverse liquid methane lakes, and a lander cannot explore distant cryovolcanoes. Furthermore, monolithic designs lack redundancy; a single mechanical failure can jeopardize an entire mission.

The Shapeshifter architecture addresses these limitations by utilizing a swarm of small, affordable Cobots that can adapt their form factor to the environment, ensuring resilience and versatility across air, land, and sea.

System Architecture and Methods

The proposed system consists of a stationary Home-base (a high-power charging and science station) and a swarm of Cobots. Each Cobot is a quadcopter-like unit equipped with a hemicylindrical shell and programmable permanent electromagnets (PEMs) for docking.

Artist's concept of the Shapeshifter platform exploring a Titan cave, illustrating the modular Cobots in various configurations.

Key Technical Approaches:

  • Morphing Dynamics: The researchers modeled the "Rollocopter" configuration, where docked Cobots form a cylinder or sphere. In this mode, internal propellers generate torque to drive rolling motion without the need for heavy dedicated wheel motors.
  • Energy Modeling: An induced-velocity power model was developed to compare mobility modes. Given Titan’s high atmospheric density and low gravity, flight is highly feasible, but rolling remains significantly more efficient on consolidated terrain.
  • Autonomy Framework: To manage the one-hour communication delay with Earth, the system utilizes LAMP (Large-scale Autonomous Mapping and Positioning) for distributed SLAM and POMDPs for high-level decision-making under uncertainty.

Key Results and Insights

Simulations and physical prototyping have validated the core concepts of the Shapeshifter platform. Analysis using Cassini mission data from the Sotra Patera region suggests that a 1kg Cobot can achieve a range of ~100km via flight, which doubles to ~200km when utilizing rolling modes on flat terrain.

Physical prototype demonstrating the docking of two Cobot units for multi-modal mobility.

Physical tests with a two-agent prototype confirmed that simple alignment funnels and PEMs allow for successful autonomous docking on sandy terrain. Furthermore, the study found that a swarm of 3 to 6 agents provides the optimal balance between aerodynamic drag and rolling efficiency. One of the most compelling insights is the concept of Collaborative Transport: while a single Cobot is small, a docked "Flight Array" can generate enough collective lift to relocate the heavy Home-base to new scientific sites.

Discussion and Future Work

While the Phase I study demonstrates feasibility, several engineering hurdles remain. Titan’s extreme cold (-179°C) requires advanced thermal management for small-scale batteries. Future work will focus on refining the "Torpedo" mode for liquid environments and developing fully decentralized coordination algorithms for the swarm. Additionally, the suction-based sampling mechanics must be tested against various simulated Titan soil compositions to ensure reliable scientific data collection.

Summary updated

Abstract

In this report for the Nasa NIAC Phase I study, we present a mission architecture and a robotic platform, the Shapeshifter, that allow multi-domain and redundant mobility on Saturn's moon Titan, and potentially other bodies with atmospheres. The Shapeshifter is a collection of simple and affordable robotic units, called Cobots, comparable to personal palm-size quadcopters. By attaching and detaching with each other, multiple Cobots can shape-shift into novel structures, capable of (a) rolling on the surface, to increase the traverse range, (b) flying in a flight array formation, and (c) swimming on or under liquid. A ground station complements the robotic platform, hosting science instrumentation and providing power to recharge the batteries of the Cobots. Our Phase I study had the objective of providing an initial assessment of the feasibility of the proposed robotic platform architecture, and in particular (a) to characterize the expected science return of a mission to the Sotra-Patera region on Titan; (b) to verify the mechanical and algorithmic feasibility of building a multi-agent platform capable of flying, docking, rolling and un-docking; (c) to evaluate the increased range and efficiency of rolling on Titan w.r.t to flying; (d) to define a case-study of a mission for the exploration of the cryovolcano Sotra-Patera on Titan, whose expected variety of geological features challenges conventional mobility platforms.
BibTeX
@misc{aghamohammadi2020shapeshifter,
  author = {Ali-akbar Agha-mohammadi and Andrea Tagliabue and Stephanie Schneider and Benjamin Morrell and Marco Pavone and Jason Hofgartner and Issa A. D. Nesnas and Rashied B. Amini and Arash Kalantari and Alessandra Babuscia and Jonathan I. Lunine},
  title = {{The Shapeshifter: a Morphing, Multi-Agent, Multi-Modal Robotic Platform for the Exploration of Titan (preprint version)}},
  year = {2020},
  eprint = {2003.08293},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2003.08293},
}
Figure