The Research and Application for the Method of the Intelligent Condition Evaluation about the Power Transmission Equipment

Junyu Dong, Jie Wei, Hong Yu, Shilin Jiang, Bing Duan, Junxian Dong, Rongdong Li2015 · DOI

Abstract

Power transmission equipment condition is critical to power system stability. Detecting incipient faults in transformers as early as possible can significantly reduce losses from temporary outages and improve operational maintenance levels. This paper proposes a condition evaluation method for power equipment based on defect, testing, and operational data. By establishing intelligent evaluation models, consistent data extraction rules, and equipment specifications, this method accurately identifies equipment status in real-time. This approach supports scientific maintenance strategies and provides a multi-dimensional assessment of overall equipment health.

Introduction

Traditionally, power grid maintenance has relied on periodic, calendar-based schedules—a "good due to compulsory" philosophy. However, as grids grow in complexity, this approach has revealed significant flaws:

  1. Blindness: Maintenance is often performed on healthy equipment, leading to unnecessary downtime.
  2. High Costs: Manual periodic checks are prohibitively expensive at scale.
  3. Lagging Response: Manual intervention often fails to catch faults before they cause outages.
  4. Resource Waste: Functional components are replaced prematurely based solely on age.

To address these issues, this research proposes an "intelligent condition evaluation" system that shifts the paradigm toward "state overhaul"—maintenance driven by actual equipment health data.

Methodology

The core of the proposed system is a hierarchical evaluation model based on a weighted fault tree. Equipment, such as a transformer, is decomposed into four primary components: General, Ontology, Casing, and Non-electricity protection systems.

Scoring and Weighting

Each component is assigned a weight (1 to 4) based on its criticality. Degradation is categorized into four severity levels (I to IV), with basic scores ranging from 2 to 10 points. The final deduction score is calculated as the product of the degradation points and the weight coefficient.

State Classification

Equipment is classified into four states—Normal, Attention, Abnormal, and Severe—based on total and single-component scores. The system follows a "bottleneck principle," where the overall state of the transformer is dictated by its most severely degraded component.

Table 1: Condition state thresholds and scoring for various equipment parts.

Results and Case Study

The model was validated using operational data from the Yunnan Power Grid Corporation, specifically targeting substations in Fuyuan, Huize, and Dongshan.

110kV Huize Substation

The system flagged the #2 main transformer for "Attention." Specific issues identified included seal aging, slight oil leakage, and low oil levels in the conservator. Given the unit's 10-year operational history, the system recommended strengthened monitoring.

35kV Dongshan Substation

The evaluation identified damage to the #2 main transformer fan motor. The system provided a clear recommendation for immediate replacement to prevent overheating and further damage.

Table 2: Evaluation results and maintenance suggestions for the 110kV Huize and 35kV Dongshan substations.

Conclusion

The intelligent condition evaluation method provides a robust framework for transitioning from periodic to condition-based maintenance. By utilizing weighted scoring and hierarchical decomposition, the model removes the "blindness" of traditional methods and provides actionable decision support for grid managers. Future work should focus on integrating more advanced machine learning techniques to move from reactive evaluation to predictive maintenance, further enhancing the reliability of the power transmission network.

Summary updated

Abstract

Power transmission equipment condition is fatal in the power system. Incipient fault of transformer is detected as early as possible, which can make for reducing the loss by the interruptions of temporary ceasing run and increasing the level of the run and maintenance. Thus, it is proposed the condition evaluation method of the power equipment, which is based on the defect, testing, operation and so on information. And equipment status evaluation rules, basic data, the evaluation results are consistent data information extraction, identification rule, the equipment specification for intelligent evaluation model are researched and established. In this paper, the proposed method is not only to evaluate the state of power equipment, accurately obtain equipment running status, and improve the efficiency of evaluation, real-time control equipment running status. At the same time, it can effectively support scientific shipment inspection strategy formulation and overall health status of the equipment of multi-dimensional assessment.
BibTeX
@misc{dong2015research,
  author = {Junyu Dong and Jie Wei and Hong Yu and Shilin Jiang and Bing Duan and Junxian Dong and Rongdong Li},
  title = {{The Research and Application for the Method of the Intelligent Condition Evaluation about the Power Transmission Equipment}},
  year = {2015},
  doi = {10.2991/icectt-15.2015.31},
}
Figure