The Remote Wifi Investigation of Network and Forensics System for Police Based on Raspberry Pi

Yang Liu, Dianjie Lu, Xing-Yue Li2017 · DOI

Abstract

This project brings forward the design of the remote WiFi investigation of network and forensics system for police based on Raspberry Pi. It can realize remote control in a few hundred meters away, and aim at the traffic data in the suspects' WiFi networks to gather the evidence. The contents of the evidence are specific and comprehensive. This system uses Raspberry Pi as the core device, and uses the XBee module to realize the function of controlling the forensics system remotely and efficiently. It can also sense the surrounding information by the photosensitive sensor. When it gets damaged, it will erase the key documents automatically. This system will ensure the safety of the detectives and fight diverse crimes efficiently.

Introduction

Digital forensics in field operations often requires investigators to be physically present within a target's WiFi coverage area. This proximity introduces significant risks: it endangers personnel by placing them near potential suspects and increases the likelihood of the investigation being compromised if the hardware is discovered. Furthermore, if surveillance hardware is seized, sensitive gathered evidence and forensic tools could be exposed. This paper proposes a Raspberry Pi-based remote forensics system that allows law enforcement to operate covertly from a distance of several hundred meters, featuring an automated data-wiping mechanism for enhanced physical security.

System Architecture and Workflow

The proposed forensics system is organized into five distinct stages: preparation, testing, self-protection, evidence collection, and uploading. This structured approach ensures that the device is properly configured before deployment and can handle various operational scenarios autonomously, including automated self-defense if the device is tampered with.

Figure 1: The multi-stage architecture of the forensics system, from preparation to evidence uploading.

Hardware Implementation and Communication

The system architecture is split into two primary components: a Control Terminal (used by the detective) and a Forensic Terminal (the Raspberry Pi deployed near the target). Communication between the two is handled by XBee-PRO HP900 modules, which utilize the ZigBee protocol at 900MHz. This provides a robust, long-range control link that is independent of the target's WiFi environment, ensuring the system remains reachable even if the WiFi environment is congested.

Figure 2: Hardware block diagram showing the connection between the Control Terminal and the Forensic Terminal via long-range wireless communication.

The Forensic Terminal is equipped with specialized WiFi adapters for monitoring and cracking (e.g., Tenda W311M) and for establishing network connections (e.g., EDU EP-N8508). To ensure reliable command execution, the authors developed a custom instruction processing module that handles serial commands asynchronously, preventing the console from hanging during intensive forensic tasks.

Evidence Collection and Remote Access

Once deployed, the system can crack WiFi passwords using standard tools like Aircrack-ng or Reaver. After gaining access to the target network, the system utilizes the Oray Dynamic Mapping Service to establish a tunnel. This allows detectives to transition from the low-bandwidth XBee link to a high-speed SSH or VNC connection over the internet. In this mode, the Raspberry Pi acts as a "springboard," allowing deeper penetration into other smart devices within the suspect's internal network.

Self-Protection Mechanism

To prevent sensitive forensic data from falling into the wrong hands, the system incorporates a "dead man's switch" using an LM393 photosensitive sensor. This sensor monitors the interior of the device's enclosure; if the enclosure is opened and exposed to light, the system triggers a script that uses the Linux shred command to overwrite sensitive documents with random data five times, ensuring the data is unrecoverable.

Experimental Results

Field tests demonstrated that the XBee-PRO HP900 module maintains a reliable control link at distances of 300 to 400 meters, even in environments with physical obstructions like buildings and trees. Power consumption analysis showed the system draws between 0.44W and 0.53W. With a standard 10,400mAh power bank, the device can operate continuously for over 10 days, providing significant endurance for long-term field surveillance.

Conclusion

The Raspberry Pi-based remote forensics system offers a safe and efficient solution for law enforcement. By decoupling the control and data planes and implementing robust self-protection features, the system minimizes risk to personnel while maximizing the effectiveness of digital evidence gathering in the field.

Summary updated

Abstract

This project brings forward the design of the remote WiFi investigation of network and forensics system for police based on Raspberry Pi. It can realize remote control in a few hundred meters away, and aim at the traffic data in the suspects' WiFi networks to gather the evidence. The contents of the evidence are specific and comprehensive. This system uses Raspberry Pi as the core device, and uses the XBee module to realize the function of controlling the forensics system remotely and efficiently. It can also sense the surrounding information by the photosensitive sensor. When it gets damaged, it will erase the key documents automatically. This system will ensure the safety of the detectives and fight diverse crimes efficiently.
BibTeX
@misc{liu2017remote,
  author = {Yang Liu and Dianjie Lu and Xing-Yue Li},
  title = {{The Remote Wifi Investigation of Network and Forensics System for Police Based on Raspberry Pi}},
  year = {2017},
  doi = {10.2991/icwcsn-16.2017.7},
}
Figure