The relative spectral response calibration of the ISO-SWS

B. Vandenbussche, P. W. Morris, E. A. Valentijn, D. A. Beintema, Danny Boxhoorn, L. Decin, Th. de Graauw, H. Feuchtgruber, A. M. Heras, F. Lahuis, R. Lorente, D. Lutz, Pieter R. Roelfsema, A. Salama, Russel Shipman, Roeland Van Malderen, E. WieprechtUniversity 2001

Abstract

The Relative Spectral Response Function (RSRF) characterises the wavelength dependent response of a spectrometer. The wavelength range of the grating section of the ISO-SWS is covered in 15 spectral bands for each of which the RSRF has to be determined. We discuss how the RSRF was measured during the Instrument Level Tests before launch, and how it was corrected based on in-orbit measurements of stellar calibration sources. Uncertainties in synthetic spectra and noise in the calibration observations can result in the introduction of erroneous spectral features in the RSRF. We show how this can be avoided by a careful selection of calibration sources across different spectral types and the use of spline smoothed correction curves.
BibTeX
@inproceedings{vandenbussche2001relative,
  author = {B. Vandenbussche and P. W. Morris and E. A. Valentijn and D. A. Beintema and Danny Boxhoorn and L. Decin and Th. de Graauw and H. Feuchtgruber and A. M. Heras and F. Lahuis and R. Lorente and D. Lutz and Pieter R. Roelfsema and A. Salama and Russel Shipman and Roeland Van Malderen and E. Wieprecht},
  title = {{The relative spectral response calibration of the ISO-SWS}},
  booktitle = {University},
  year = {2001},
}

Loading related content...

Figure