The relationship between lateral meniscus shape and joint contact parameters in the knee: a study using data from the Osteoarthritis Initiative

Kai Yu Zhang, Angela E. Kedgley, Claire Donoghue, Daniel Rueckert, Anthony M. J. BullArthritis 2014 · DOI

Abstract The correlations discovered suggest that variations in meniscal shape can be at least partially explained by the levels of loads transmitted across the knee on a regular basis. Additionally, as the size of the subject increases and body weight rises, the coverage percentage of the meniscus is reduced, suggesting that there would be an increase in the load-bearing by the cartilage. However, this reduced coverage percentage is compensated by the proportionally wider and longer meniscal horn.

Introduction

The meniscus is a critical crescent-shaped fibrocartilage structure that serves as a primary shock absorber within the knee joint. Clinical evidence has long established that meniscectomy—the surgical removal of the meniscus—leads to accelerated joint degeneration and the onset of osteoarthritis. Despite its importance, our understanding of how the three-dimensional morphology of the meniscus varies across healthy individuals remains limited. Previous research has often been constrained by two-dimensional measurements or small sample sizes, failing to capture the full complexity of subject-specific biomechanics. This study aims to bridge this gap by investigating how individual anthropometric factors, such as height, weight, and bone size, influence the geometry of the lateral meniscus (LM).

Methods and Data

To analyze the morphological variations of the LM, researchers utilized data from the Osteoarthritis Initiative (OAI), specifically focusing on a "non-exposed" control subcohort of 50 healthy subjects (25 male, 25 female). This selection ensured that the resulting models represented "normal" meniscal anatomy without the confounding effects of symptomatic or radiographic osteoarthritis.

The study employed Statistical Shape Modeling (SSM), a model-based image analysis technique:

  1. Segmentation: The LM was manually segmented from high-resolution 3D MRI scans across coronal, axial, and sagittal planes.
  2. SSM Construction: Principal Component Analysis (PCA) was used to identify "Principal Morphological Variations" (PMVs), which mathematically describe the most significant shape changes within the population.
  3. Quantification: Seven specific geometric parameters were measured, including horn widths, lengths, and the "coverage percentage" of the tibial plateau.
  4. Statistical Analysis: These shape variations were correlated against anthropometric data, including height, weight, BMI, and femoral condyle width.
Figure 1: MRI segmentation of the lateral meniscus in (A) coronal, (B) axial, and (C) sagittal views, with (D) the resulting 3D reconstructed model.

Key Insights

The analysis revealed several critical relationships between body habitus and meniscal shape:

  • Load-Driven Morphology: The primary mode of variation (PMV1) was strongly driven by the subject's overall size. This suggests that meniscal geometry is an adaptive response to the mechanical loads transmitted through the knee during daily activities.
  • The Coverage Paradox: Contrary to what might be expected, larger and heavier individuals exhibited a lower percentage of tibial plateau coverage by the meniscus. This reduction in coverage potentially increases the direct load-bearing requirements of the underlying articular cartilage.
  • Morphological Compensation: To mitigate the effects of reduced coverage, the menisci of larger individuals demonstrated specific compensatory growth. Rather than scaling uniformly, the anterior and posterior horns became proportionally longer and wider. This geometry is likely optimized to manage the increased "hoop stresses" (circumferential tension) associated with higher body weights.
  • Horn Openness: The third major variation (PMV3) related to "horn openness." Larger subjects tended to have more "open" menisci, which may influence the rotational mobility of the tissue during knee movement.

Results

Statistical testing confirmed strong correlations between shape variations and physical metrics:

  • PMV1 (Size): Correlated significantly with weight (r = 0.647), femoral condyle width (r = 0.622), and height (r = 0.569).
  • PMV3 (Openness): Correlated with height (r = 0.406) and femoral condyle width (r = 0.331).
  • Variance: The first six PMVs accounted for over 90% of the total morphological variation observed.
  • Gender Trends: While overall correlations were robust, gender-specific analysis showed weaker trends, suggesting that while size is the primary driver, there are subtle sex-specific anatomical nuances.

Discussion and Future Directions

While this study provides a detailed 3D map of meniscal variation, it is limited by its reliance on static MRI. The meniscus is a dynamic structure that deforms under load; therefore, static models cannot fully capture behavior during gait. Furthermore, while the authors hypothesize that reduced coverage increases cartilage stress, direct measurements of cartilage thickness or intra-articular pressure were not performed.

Future research should expand the cohort size and diversity to enhance model robustness. Applying this 3D SSM approach to osteoarthritic populations could help identify "at-risk" meniscal phenotypes, potentially allowing for earlier intervention or the design of patient-specific implants tailored to an individual's unique biomechanical profile.

Summary updated

Abstract

The correlations discovered suggest that variations in meniscal shape can be at least partially explained by the levels of loads transmitted across the knee on a regular basis. Additionally, as the size of the subject increases and body weight rises, the coverage percentage of the meniscus is reduced, suggesting that there would be an increase in the load-bearing by the cartilage. However, this reduced coverage percentage is compensated by the proportionally wider and longer meniscal horn.
BibTeX
@inproceedings{zhang2014relationship,
  author = {Kai Yu Zhang and Angela E. Kedgley and Claire Donoghue and Daniel Rueckert and Anthony M. J. Bull},
  title = {{The relationship between lateral meniscus shape and joint contact parameters in the knee: a study using data from the Osteoarthritis Initiative}},
  booktitle = {Arthritis},
  year = {2014},
  doi = {10.1186/ar4455},
}
Figure