The Quasi-elliptic Bandpass Filter Using Quarter-wavelength Stepped Impedance Resonators

Yuwei Chen, Yen-Ju Liu, Min‐Hua HoPIERS 2006 · DOI

TL;DR

This paper presents a novel design for a compact quasi-elliptic bandpass filter using quarter-wavelength stepped impedance resonators (SIRs). By employing a U-shaped coupling feed and shorting vias, the filter achieves a sharp frequency response with suppressed harmonics, offering a good balance of performance and size reduction for microwave applications.

What Problem Does This Paper Address?

The design of miniaturized and high-performance microwave filters is a persistent challenge. Traditional microstrip filters often struggle with achieving both compact size and effective harmonic suppression. While quarter-wavelength resonators offer space savings compared to half-wavelength ones, further improvements in selectivity and harmonic rejection are desirable. This paper aims to address this by proposing a filter design that leverages the unique properties of quarter-wavelength SIRs in conjunction with a specific coupling mechanism to achieve a quasi-elliptic response, which is known for its sharp skirt selectivity and harmonic suppression.

Methods

The core of the proposed design lies in the use of two end-connected quarter-wavelength stepped impedance resonators (SIRs). These SIRs are implemented by taking a half-wavelength SIR and shorting its middle to ground via a metallic via hole. This configuration allows the resonator to support modes at (1+2n)λ/4, which is beneficial for harmonic suppression.

A key innovation is the adoption of an enhanced U-shaped coupling feed. This feed structure, along with the shorting via, creates a cross-coupling effect between the input and output ports, which is crucial for achieving the desired quasi-elliptic frequency response. The U-shape coupling also contributes to reduced insertion losses.

An equivalent circuit model is developed to accurately predict the filter's behavior, allowing for efficient design and tuning. This model incorporates lumped elements representing the coupling capacitances and the shunt inductance introduced by the shorting via.

Datasets

Not discussed in the paper. The paper focuses on the design and simulation/measurement of a specific filter circuit.

Key Insights and Ideas

  • Quarter-wavelength SIRs for Miniaturization and Harmonic Control: The paper highlights that quarter-wavelength SIRs, when implemented with a shorting via, offer a more attractive option for miniaturization and provide a wider stopband bandwidth due to their spurious responses occurring at (2n+1)f₀, compared to traditional half-wavelength resonators.
  • U-shaped Coupling for Quasi-Elliptic Response and Low Loss: The U-shaped coupling feed is a critical element that, in conjunction with the shorting via, generates the quasi-elliptic response. This response is characterized by sharp skirt selectivity and is achieved through cross-coupling, which also helps in reducing insertion losses.
  • Equivalent Circuit Model for Accurate Prediction: The development of an equivalent circuit model that accurately simulates the filter's frequency response is a significant contribution, enabling efficient design and verification without relying solely on full-wave electromagnetic simulations.
  • Harmonic Suppression through Design Choices: The combination of the SIR configuration and the U-shaped coupling feed effectively suppresses the first spurious response (predicted at 3f₀), extending the stopband bandwidth and improving overall filter performance.

Key Results

The proposed filter design, fabricated on a 0.635-mm-thick RT/duroid 6010 substrate, achieved a passband bandwidth of 9.5% centered at 2.4 GHz. The filter exhibited three implanted transmission zeros with depths exceeding 47.5 dB at 1.735, 2.89, and 4.51 GHz, contributing to its sharp selectivity. The minimal passband insertion loss was measured at approximately 1.87 dB. The design also demonstrated effective suppression of the first spurious response at around 7.8 GHz, with upper rejection bandwidths exceeding 20 dB from 2.735 GHz up to the measurement limit of 8 GHz. The simulated and measured results showed excellent agreement, validating the design methodology.

Limitations and Future Work

The authors acknowledge that discrepancies between simulated and measured results are mainly due to fabrication tolerances. While the paper demonstrates a successful quasi-elliptic filter design, further work could explore:

  • Optimization for different frequency bands: Adapting the design principles to other microwave frequency ranges.
  • Further miniaturization: Investigating alternative resonator structures or coupling techniques for even greater size reduction.
  • Tunability: Exploring methods to make the filter tunable for flexible applications.
  • Higher-order filters: Extending the concept to design higher-order quasi-elliptic filters with even sharper roll-offs.

Summary updated

Abstract

A bandpass fllter is designed using two end-connected quarter-wavelength stepped impedance resonators. The quarter-wavelength stepped impedance resonators are implemented by a half-wavelength stepped impedance resonator with its middle shorting to ground. Hence, the modes that the ‚=4 stepped impedance resonator supports are the (1+2n)=4 which also occur on the branches of a combline. An enhanced U-shape coupling feed is adopted in the fllter design to reduce the insertion losses as well as suppressing the harmonics. The proposed fllter has a quasi-elliptic frequency response. An equivalent circuit model is developed and the experiments are conducted for circuit design veriflcation.
BibTeX
@inproceedings{chen2006quasi,
  author = {Yuwei Chen and Yen-Ju Liu and Min‐Hua Ho},
  title = {{The Quasi-elliptic Bandpass Filter Using Quarter-wavelength Stepped Impedance Resonators}},
  booktitle = {PIERS},
  year = {2006},
  doi = {10.2529/piers060823031952},
}
Figure