The Prediction of Air Flow and Pressure Loss at Inlet Duct

Bo-Hwa Lee, Kyungjae Lee, Soo-Seok YangJournal of the Korean Society of Propulsion Engineers 2010

Abstract

․ KyungJae Lee* ․ SooSeok Yang**ABSTRACT The purpose of this paper was to address the methodology of the air flow measurement using duct mach number that was considered area-weighed average obtained by total, static pressure and temperature measured at engine inlet duct. Without installing b oundary rake, the prediction of air flow measurement was discussed. Actual air flow measurement and pressure value using pressure loss through inlet seal were described to improve the reliability and operability of altitude engine test facility.초 록 본 논문에서는 엔진고공환경 시험설비의 엔진 입구 덕트에서 측정한 전압력과 정압력 및 전온도를 통해 실시간으로 공기유량을 계산하고, 압력프로파일을 이용하여 경계층 레이크를 장착하지 않았을 경우에도 공기유량을 예측할 수 있는 방법을 기술하였다. 또한, 엔진입구배관에 걸친 덕트 연결부를 통한 압력손실을 예측하고, 이를 통해 공기유량을 보정함으로써, 고공환경시험설비에서의 공기유량측정의 신뢰도를 향상시키고 설비유지측면에서의 운용성을 보고자 하였다.Key Words: Altitude Engine Test Facility(엔진고공환경 시험설비), Duct mach number(덕트 마하수), Airflow(공기유량), Pressure loss(압력손실), Rake(레이크)1. 서 론 한국항공우주연구원에서 보유중인 엔진고공환경시험설비(AETF)는 1999년 설치 이래로 국제 표준에 부합한 측정체계의 구축, 군사규격 등에서 요구하는 다양한 시험기술을 개발하여 시험항목을 확대하고, 시험설비의 측정 정확도 및 신뢰성을 검증함으로써 세계적으로 인증 받고자 노력하고 있다. 이 중 AETF에서의 공기공급시스템은 크게 입구공기여과기, 압축기, 공기건조기,
BibTeX
@article{lee2010prediction,
  author = {Bo-Hwa Lee and Kyungjae Lee and Soo-Seok Yang},
  title = {{The Prediction of Air Flow and Pressure Loss at Inlet Duct}},
  journal = {Journal of the Korean Society of Propulsion Engineers},
  year = {2010},
}

Loading related content...

Figure