Abstract
In the Wireless Sensor Network, a new MAC protocol: one-persistent CSMA protocol with monitoring functions and multichannel mechanism for Wireless Sensor Network based on conflict resolution algorithm is proposed. Protocol from the system throughput, collision rate, better service quality for higher priority and other aspects improve the traditional CSMA system to perfect the controllability of the system, making the system more stable for the big data, better adapted to different business. The average cycle method is used to derive rigorous mathematical expressions of specific relevant parameters. Using MATLAB simulation tool for the accuracy of the agreement is demonstrated.
Introduction
Wireless Sensor Networks (WSNs) are increasingly tasked with handling massive data volumes in modern IoT applications. Standard Medium Access Control (MAC) protocols, particularly the widely used Carrier Sense Multiple Access (CSMA), often struggle under these "Big Data" loads. In a typical one-persistent CSMA setup, nodes wait for a channel to become idle and then transmit immediately. While efficient for light traffic, this behavior leads to catastrophic collisions when multiple nodes are waiting for the same channel. The resulting retransmissions waste energy and cause throughput to plummet, creating a bottleneck for time-sensitive or high-priority data.
The Proposed Protocol
To address these challenges, this paper proposes an enhanced one-persistent CSMA protocol that integrates three core innovations: a multichannel mechanism with priority division, an acknowledgement (ACK) monitoring function, and a binary tree conflict resolution algorithm.
Multichannel Mechanism and Priority Division
Instead of a single shared channel, the system utilizes $N$ distinct channels. Nodes are assigned priority levels from 1 to $N$. A node with priority $i$ is permitted to randomly select any channel from index 1 to $i$ for its transmission. This design inherently balances the network load; high-priority traffic has access to a wider range of channels, reducing its probability of collision, while low-priority traffic is constrained to a smaller subset, preventing it from overwhelming critical data paths.
Monitoring and Conflict Resolution
The protocol incorporates a three-way handshake (data-ACK-monitoring) to confirm successful packet delivery and minimize the "vulnerability window" where collisions are most likely to occur. When a collision is detected, the protocol departs from standard random back-off methods. Instead, it employs a modified binary tree algorithm to systematically partition colliding nodes into smaller groups. This structured approach ensures that conflicts are resolved efficiently, maintaining network stability even under heavy load.
Performance Evaluation
The researchers validated the protocol using a stochastic simulation model in MATLAB R2010a. Data arrivals were modeled using a Poisson distribution, and the simulations assumed a normalized propagation delay ($a$) of 0.01.
Key Results
The simulation results closely matched the theoretical derivations obtained via the average cycle method, confirming the mathematical model's accuracy.
- Throughput Stability: Unlike traditional CSMA, which experiences a "throughput collapse" as arrival rates increase, the new protocol reaches a stable saturation point. The binary tree mechanism ensures that as the network becomes busier, throughput remains high rather than crashing toward zero.
- Comparative Performance: As shown in the comparative analysis, the proposed protocol significantly outperforms both standard one-persistent CSMA and CSMA with basic monitoring functions.
- Quality of Service (QoS): The priority-based channel mapping effectively differentiates service quality. In tests with five priority levels, the highest priority maintained nearly ten times the throughput of the lowest priority under heavy traffic conditions.
Conclusion
The proposed one-persistent multichannel CSMA protocol offers a robust solution for high-traffic WSNs. By combining priority-based load balancing with structured conflict resolution, it achieves higher throughput and better stability than traditional methods. While the current study assumes an ideal channel, future work should explore the protocol's performance in noisy environments and its specific energy consumption profiles to further optimize it for battery-constrained sensor nodes.
Summary updated