Abstract
For the improvement of living environment, there are more needs of the real time and online automatic noise monitoring system installed in many urban areas. In this project, the principle of noise audio frequency processing and coding algorithm was researched, including Discrete Cosine Transform and Wavelet Transform. The noise monitoring system solved the synchronous problem between the audio data and noise decibel, the special storage format separated the audio data which can be located in probability, and the audio data across segments to be played continually. The design of double-layer structure and isolating solved the problem of heat dissipating, waterproof and dustproof. In the experimental testing of the noise monitoring system, the noise decibel was affected by temperature and differential pressure, for improving its precision, the linear regression model is applied in the calculation of noise decibel. The least estimate method was used to calculate the residual for the automatic correction of the noise monitoring, and increase the accuracy of noise monitoring.
Introduction
Urban noise pollution has evolved from a simple nuisance into a significant public health concern. Sustained noise levels exceeding 50dB(A) are linked to cardiovascular disease, sleep disturbances, and cognitive impairment. To mitigate these risks, municipal authorities require real-time, automated monitoring systems that can provide reliable data across diverse urban environments. However, standard noise sensors often suffer from "sensor drift" caused by environmental fluctuations—a reading at 10°C may differ from one at 30°C even if the acoustic energy is identical.
As shown in the table above, different urban zones have strict decibel limits for daytime and nighttime. Maintaining the accuracy of monitoring systems is critical for legal compliance and urban planning. This paper introduces the ENS-3000, a system designed to bridge the gap between raw data collection and reliable environmental intelligence through physical ruggedness and mathematical self-correction.
System Architecture and Methods
The ENS-3000 utilizes a modular software architecture that communicates via message queues to ensure high availability and data integrity. Physically, the unit employs a double-layer isolating structure to balance the competing needs of heat dissipation and protection against rain and dust.
The network topology connects individual Environmental Noise Sensors (ENS) through a Wide Area Network (WAN) to a central server, which then serves data to PCs and mobile terminals for real-time oversight. To manage the high volume of 24/7 audio data, the system implements Discrete Cosine Transform (DCT) for redundancy removal and Wavelet Transform for precise time-frequency localization of non-stationary noise signals.
Automatic Correction Algorithm
A core innovation of this research is the realization that a noise monitoring system must also function as a weather station to remain accurate. The researchers identified temperature ($x_1$) and differential pressure ($x_2$) as the primary environmental variables affecting sensor precision. They applied a multivariable linear regression model:
$$y = \beta_0 + \beta_1x_1 + \beta_2x_2$$
To refine this model, the team used an iterative Least Squares Method on a dataset of 54 experimental points (Dataset M1). By analyzing residual plots, they performed a three-step cleaning process to remove outliers that deviated from the expected physical response of the sensors. This iterative approach significantly boosted the statistical reliability of the final correction formula.
Key Results
The study successfully derived a specific corrective equation for the ENS-3000 hardware:
$$y = 93.0659 + 0.0291x_1 + 0.02x_2$$
Statistical analysis confirmed the efficacy of the iterative cleaning process; the p-value of the model improved from 0.0195 in the initial pass to 0.0046 in the final pass, indicating a much tighter fit to physical reality. Operationally, the system demonstrated the ability to synchronize audio data with decibel readings and provide seamless playback across storage boundaries, even in harsh outdoor conditions.
Conclusion and Future Work
While the ENS-3000 represents a significant step forward in automated urban monitoring, limitations remain. The current correction model is based on a relatively small sample size of 54 data points. Future research should expand this dataset to include more extreme weather conditions and potentially incorporate humidity as a third variable ($x_3$) in the regression model. Additionally, exploring the performance of these units within a large-scale mesh network would provide insights into the scalability of high-precision urban noise monitoring.
Summary updated