The Lean-Burn Limit Extending Experiment on Gasoline Engine with Dual Injection Strategy and High Power Ignition System

Zhiqiang Li, Jing Qin, Yiqiang Pei, Kai Zhong, Zhiyong Zhang, Jian SunEnergies 2023 · DOI

TL;DR

This study explores extending the lean-burn limit of gasoline engines using a dual injection strategy and a high-power ignition system. The research demonstrates that this approach can significantly improve thermal efficiency under ultra-lean conditions and extend the operational limit, offering a promising path for more fuel-efficient and lower-emission internal combustion engines.

What Problem Does This Paper Address?

The automotive industry faces a dual challenge: meeting increasing energy demands while simultaneously reducing greenhouse gas emissions. Gasoline engines, despite the rise of electric vehicles, remain a dominant powertrain technology, especially in hybrid vehicles where extreme thermal efficiency is crucial. Lean-burn combustion, which uses more air than fuel, is a key strategy for improving thermal efficiency and reducing knocking. However, achieving stable combustion and extending the lean-burn limit (the point at which the mixture is too lean to ignite reliably) has been a significant hurdle. This paper tackles the problem of extending this lean-burn limit and improving combustion stability in gasoline engines, particularly under ultra-lean conditions, by combining advanced injection and ignition technologies.

Methods

The researchers employed a single-cylinder direct injection spark ignition (DISI) gasoline engine with a very high compression ratio (17:1) to maximize thermal efficiency potential. The core of their approach involved:

  • Dual Injection Strategy: Instead of a single fuel injection, they used two injections per cycle. This allows for creating a stratified mixture, with a richer zone near the spark plug for easier ignition and a leaner overall mixture.
  • High-Power Ignition System (HPIS): A specialized ignition system capable of delivering high energy (up to 424 mJ) was used to ensure reliable ignition of the lean mixtures.
  • Stratified Combustion: The combination of dual injection and careful timing aimed to create a stratified fuel-air mixture within the combustion chamber.
  • Experimental Parameter Variation: The study systematically varied key parameters:
  • Second Injection Proportion (SIP): The percentage of fuel delivered in the second injection.
  • Second Injection Timing (SIT): The crank angle at which the second injection occurred.
  • Excess Air Coefficient (λ): Ranging from stoichiometric (λ=1.0) to ultra-lean (λ=2.0).

The performance was evaluated by measuring indicated thermal efficiency (ηth), coefficient of variation of IMEP (COVIMEP) for combustion stability, and other combustion parameters.

Datasets

Not discussed in the paper. The study relies on experimental data collected from the test engine under controlled conditions.

Key Insights and Ideas

  • Dual Injection is Key to Extending the Limit: The stratified combustion achieved through dual injection was instrumental in extending the lean-burn limit to λ=2.0, a significant improvement over homogeneous combustion.
  • Reverse Trends in SIP: A surprising finding was the "reverse combustion performance trends" observed when altering the SIP. Increasing SIP from 30% to 45% improved thermal efficiency under lean conditions (λ=1.6) but decreased it under ultra-lean conditions (λ=1.9). This highlights the complex interplay between mixture stratification and combustion dynamics.
  • SIT Optimization is Crucial but Condition-Dependent: While retarding the SIT generally improved combustion control and thermal efficiency under lean conditions (λ=1.6), it led to instability and negative effects under ultra-lean conditions (λ=1.9). This suggests that optimal SIT is highly dependent on the overall mixture leanness.
  • Robustness is a Challenge for Ultra-Lean: The study underscores that achieving stable ultra-lean combustion is not just about initial flame kernel formation but also about sustained flame propagation. The robustness of mixture distribution and concentration gradients remains a challenge for ultra-lean operation.

Key Results

  • Lean-Burn Limit Extension: Stratified combustion with dual injection extended the lean-burn limit to λ=2.0, achieving a 5.6% improvement in thermal efficiency compared to homogeneous combustion at λ=1.6.
  • SIP Effects:
    • Under lean conditions (λ=1.6), increasing SIP from 30% to 45% slightly increased thermal efficiency.
  • Under ultra-lean conditions (λ=1.9), increasing SIP from 30% to 45% led to a decrease in thermal efficiency.
  • SIT Effects:
    • For lean conditions (λ=1.6), retarding SIT to -90 °CA ATDC yielded the peak thermal efficiency and good combustion stability.
  • For ultra-lean conditions (λ=1.9), SIT at -180 °CA ATDC provided the most stable operation, with further retarding leading to severe fluctuations and unacceptable knock combustion.

Limitations and Future Work

  • Robustness of Ultra-Lean Combustion: The paper acknowledges the "weak robustness" of the dual injection strategy for ultra-lean conditions. The complex interplay of mixture distribution, concentration gradients, and flame propagation requires further investigation.
  • Need for More Advanced Strategies: The authors suggest that for ultra-lean operation (λ=1.9), more injection times and suitable air flow organization are necessary to enhance the robustness of mixture distribution. This points towards future research in multi-injection strategies and active intake air control.
  • Limited SIP Range: The minimum SIP was limited to 30% due to injector response times, suggesting that exploring even finer control over fuel distribution could yield further benefits.

Summary updated

Abstract

In the context of the energy crisis and global warming, improving thermal efficiency is the most important issue in research on gasoline engines, and lean mixture combustion strategy is becoming the most promising method. Thus, a high compression ratio, a high-power interval ignition system, and a stratified combustion scheme achieved via dual injection were novelly adopted in a single cylinder gasoline engine in this study. The results show that the lean combustion limit could be literally extended and improved thermal efficiency was observed under the ultra-lean condition. Meanwhile, reverse combustion performance trends were observed by altering the second injection proportion from 30% to 45% under the lean condition (λ = 1.6) and ultra-lean condition (λ = 1.9). This was related to a combustion velocity change caused by great concentration gradient at the middle and end combustion stage. Finally, according to research on the effects of altering the timing of the second injection, it is clear that the dual injection strategy is an ideal method for realizing operation under the lean condition (λ = 1.6). But for the operation under the ultra-lean condition (λ = 1.9), more injection times and suitable air flow organization are needed to enhance the robustness of mixture distribution.
BibTeX
@inproceedings{li2023lean,
  author = {Zhiqiang Li and Jing Qin and Yiqiang Pei and Kai Zhong and Zhiyong Zhang and Jian Sun},
  title = {{The Lean-Burn Limit Extending Experiment on Gasoline Engine with Dual Injection Strategy and High Power Ignition System}},
  booktitle = {Energies},
  year = {2023},
  doi = {10.3390/en16155662},
}

Loading related content...

Figure