The investigation of peritectic solidification of high nitrogen stainless steels by in-situ observation

Tong Wang, Sicheng Qian, Yuhong Wang, Yunfei Ding, Yiqiang He, J.l. Xu, Hao Xue, Feng Wen, Feng ShangHigh 2024 · DOI

Abstract

High nitrogen stainless steels (HNSS) are increasingly utilized in aerospace, marine engineering, and military applications due to their high corrosion resistance and mechanical strength. Nitrogen serves as a cost-effective austenite stabilizer, replacing expensive nickel. However, the solidification process of HNSS is complex and prone to defects like porosity and cracks. This study employs high-temperature confocal microscopy (HTCM) and a unique concentric solidification technique to provide in-situ observations of the phase transformations. The research identifies a two-step peritectic solidification mode ($L + \delta \rightarrow \gamma$), where austenite ($\gamma$) nucleates at the liquid/ferrite interface. These findings offer critical insights for optimizing the continuous casting processes of high-nitrogen alloys.

The Challenge of Real-Time Solidification Imaging

Understanding the "upstream" solidification phase is vital, as it dictates the final material properties. However, observing these transitions in real-time is notoriously difficult. Standard High-Temperature Confocal Microscopy (HTCM) often suffers from a "meniscus effect." In this phenomenon, the surface tension of a small molten sample creates a curved surface that reflects light poorly, obscuring the critical liquid/solid (L/S) interface and making precise measurements impossible.

Methods: The Concentric Solidification Technique

To overcome the meniscus effect, researchers utilized a specialized concentric solidification technique. Instead of melting a standard flat sample, they created a centralized melt pool surrounded by a solid rim. By establishing a radial thermal gradient, the liquid/solid interface was manually "pinned" in the center of the field of view. This setup minimizes surface curvature, allowing for high-resolution, real-time imaging of phase transitions.

Schematic of the concentric solidification technique and the resulting HTCM image showing the pinned liquid (L) and solid (S) interface.

The study focused on S31254, a super austenitic stainless steel containing 0.2 wt% nitrogen. Samples were heated to form a liquid pool and then cooled at a controlled rate of 20°C/min while the microscope captured the evolving microstructure.

Key Insights: The Peritectic "Two-Step Dance"

The solidification of HNSS was found to be a classic two-step peritectic reaction rather than a single event.

  1. Nucleation: Austenite ($\gamma$) first nucleates and grows rapidly along the interface between the liquid (L) and the $\delta$-ferrite.
  2. Thickening: This pre-formed $\gamma$ layer then thickens by growing "sideways," consuming both the remaining liquid and the solid ferrite phase.

Nitrogen acts as a potent $\gamma$-stabilizer, making the solidification path extremely sensitive to concentration. The researchers observed that the solid-state growth of $\gamma$ (consuming $\delta$-ferrite) proceeds significantly faster than its growth into the liquid phase.

Results and Visual Confirmation

The concentric solidification method provided rare visual evidence of tri-phase coexistence (Liquid, $\delta$, and $\gamma$). The team documented the full sequence: during heating, the brittle $\sigma$-phase darkened and etched before $\gamma$ transformed to $\delta$ and partially melted. Upon cooling, $\delta$ grew into the melt first, followed by the peritectic $\gamma$ formation.

In-situ observation of the peritectic reaction (e), showing the austenite (\gamma) phase growing between the liquid (L) and \delta-ferrite.

The reaction was tracked across specific temperature points, notably showing significant phase movement and transformation between 1330°C and 1254°C. This confirms that HNSS follows a peritectic solidification mode similar to low-carbon steels, despite its more complex chemical composition.

Conclusion and Future Outlook

By successfully bypassing the technical limitations of HTCM, this study provides a roadmap for understanding the complex solidification of high-performance stainless steels. While the current work focused on a 0.2 wt% nitrogen concentration, future research will explore how varying nitrogen levels and other alloying elements (like Molybdenum or Chromium) shift the peritectic "window." These insights are essential for refining industrial continuous casting processes to prevent defects in the next generation of high-nitrogen alloys.

Summary updated

Abstract

Abstract High nitrogen stainless steel has wide application prospects in many fields such as aerospace, petrochemical industry, marine engineering, energy, and military. Nitrogen is added as an alloying element to replace the more expensive element, nickel, thereby reducing the cost. Since nitrogen serves as an austenite stabilizer and has a higher nickel equivalent, it can improve the corrosion resistance and other mechanical properties of the alloy, yet it could also cause porosity and cracks. As the most upstream process of material processing, the solidification process largely determines the structure and performance of the product. High temperature confocal microscope can provide in-situ observations of phase transformation in metals and alloys. Thermodynamic calculations and other research articles show that the solidification of high nitrogen stainless steel usually involves multiple phases, δ-ferrite, γ-austenite, and liquid (L). Present research utilizes a unique concentric solidification technique to manually create a solid/liquid interface for studying the coexistence of multi-phase. It was found that during the solidification process of a high nitrogen stainless steel, the γ grows along the L/δ interface (L + δ → γ), and then, the pre-formed γ through peritectic reaction grows into δ and L phase. This two-step solidification mode is a typical peritectic solidification. The intervention of N makes the solidification process of high nitrogen stainless steel extremely complicated, because N is a strong γ stabilizer, and its content dramatically affects the formation of the primary phase. The rarely reported peritectic solidification in high nitrogen stainless steel was observed, and these findings could help improve the continuous casting process of high N alloys.
BibTeX
@inproceedings{wang2024investigation,
  author = {Tong Wang and Sicheng Qian and Yuhong Wang and Yunfei Ding and Yiqiang He and J.L. Xu and Hao Xue and Feng Wen and Feng Shang},
  title = {{The investigation of peritectic solidification of high nitrogen stainless steels by <i>in-situ</i> observation}},
  booktitle = {High},
  year = {2024},
  doi = {10.1515/htmp-2024-0044},
}
Figure