The In-Plane-Two-Folders Symmetric a-Plane AlN Epitaxy on r-Plane Sapphire Substrate

Fabi Zhang, Lijie Huang, Jin Zhang, Zhiwen Liang, Chenhui Zhang, Shangfeng Liu, Wei Luo, Junjie Kang, Jiakang Cao, Tai Li, Qi Wang, Ye YuanSymmetry 2022 · DOI

TL;DR

Researchers have successfully grown high-quality, non-polar alpha-plane Aluminum Nitride (AlN) films on r-plane sapphire substrates using a combination of physical vapor deposition and high-temperature annealing. This novel approach creates an in-plane two-fold symmetric structure, which is crucial for developing advanced optoelectronic devices, particularly in the challenging deep-ultraviolet (DUV) spectrum, by mitigating detrimental polarization effects.

What Problem Does This Paper Address?

The development of efficient deep-ultraviolet (DUV) light-emitting diodes (LEDs) and lasers has been significantly hampered by strong polarization effects within conventional c-plane nitride semiconductors. These polarization fields, arising from the quantum-confined Stark effect (QCSE), impede carrier recombination and reduce device efficiency, especially in the UVC band (<280 nm). While non-polar or semi-polar semiconductor orientations have shown promise in visible light devices by circumventing these polarization issues, achieving high-quality non-polar AlN templates for DUV applications has remained a challenge. This paper addresses the need for a robust and well-characterized non-polar AlN template that can serve as a foundation for next-generation DUV optoelectronics.

Methods

The researchers employed a two-pronged approach:

  • Physical Vapor Deposition (PVD): AlN films were initially grown on r-plane sapphire substrates using PVD with an aluminum target and a nitrogen/argon atmosphere.
  • High-Temperature Annealing (HTA): Following deposition, the as-grown AlN films underwent a crucial high-temperature annealing step (1700 °C for 5 hours in a nitrogen atmosphere). This annealing process was found to be critical for significantly improving the crystalline quality of the AlN films.

To characterize the resulting AlN films, the team utilized:

  • X-ray Diffraction (XRD): Rocking curves, 2theta-omega scans, and phi scans were performed to analyze the crystalline quality, orientation, and epitaxial relationships.
  • Atomic Force Microscopy (AFM): AFM was used to investigate the surface morphology and roughness of the AlN films.
  • Raman Spectroscopy: Raman spectroscopy was employed to study the phonon vibration modes and assess the crystalline quality and strain state of the AlN.

Datasets

Not discussed in the paper. The study focuses on the in-situ characterization of AlN films grown on sapphire substrates.

Key Insights and Ideas

  • Annealing is Key: High-temperature annealing is not just a post-processing step but a critical enabler for achieving high-quality crystalline AlN on r-plane sapphire. It significantly reduces defects and reorders the lattice.
  • In-Plane Two-Fold Symmetry: The combination of a-plane AlN and r-plane sapphire results in an in-plane two-fold symmetric structure. This symmetry is a significant advantage for non-polar devices, as it avoids the strong polarization effects seen in c-plane structures.
  • Thickness-Dependent Strain: As the AlN film thickness increases, a noticeable lattice distortion and expansion occur along the out-of-plane direction. This effect becomes particularly pronounced at thicknesses around 1000 nm, suggesting a critical thickness for strain management.
  • Surface Morphology Anisotropy: The annealed AlN surfaces exhibit structural anisotropy, with features aligned along the [1100] direction, which is directly related to the underlying crystal structure.

Key Results

  • Improved Crystallinity: High-temperature annealing dramatically improved the crystalline quality of the AlN films, as evidenced by sharper XRD rocking curves (FWHM reduced to 0.36° for (110) and 0.42° for (100) planes after annealing).
  • Epitaxial Relationship: The study confirmed a specific epitaxial relationship between a-plane AlN and r-plane sapphire, with the in-plane component of the sapphire c-axis parallel to the c-axis of AlN.
  • Lattice Expansion: For a 1000 nm thick AlN film, XRD measurements indicated a lattice expansion along the out-of-plane direction, with a lattice parameter of 1.5640 Å, compared to 1.5608 Å for thinner films.
  • Raman Spectra Confirmation: Raman spectroscopy confirmed the presence of characteristic AlN phonon modes (A1(TO), E2H, E1(TO)) and showed that annealing sharpened these peaks, further indicating improved crystallinity. The A1(TO) mode exhibited a redshift with increasing thickness, consistent with strain effects.
  • Surface Morphology: AFM revealed that while as-grown films had a root-mean-square (RMS) roughness of 4.9 nm, annealing led to larger crystal sizes but also increased RMS roughness to 9.6 nm, possibly due to surface decomposition at high temperatures.

Limitations and Future Work

  • Surface Decomposition: The authors note that the increased surface roughness after annealing might be due to surface decomposition, which could negatively impact subsequent epitaxial growth. This suggests that optimizing annealing conditions to minimize decomposition while maximizing crystalline improvement is crucial.
  • Strain Management: The observed thickness-dependent lattice distortion and expansion highlight the need for careful control of AlN film thickness to manage strain for optimal device performance. Future work could explore strategies to mitigate this strain.
  • Device Fabrication: While this paper provides a crucial template, the next logical step is to utilize these non-polar AlN films for the fabrication of actual DUV optoelectronic devices and to demonstrate their performance advantages over conventional c-plane devices.
  • Morphology Control: Further investigation into how preparation conditions modulate surface morphology and its impact on subsequent epitaxy is warranted.

Summary updated

BibTeX
@article{zhang2022plane,
  author = {Fabi Zhang and Lijie Huang and Jin Zhang and Zhiwen Liang and Chenhui Zhang and Shangfeng Liu and Wei Luo and Junjie Kang and Jiakang Cao and Tai Li and Qi Wang and Ye Yuan},
  title = {{The In-Plane-Two-Folders Symmetric a-Plane AlN Epitaxy on r-Plane Sapphire Substrate}},
  journal = {Symmetry},
  year = {2022},
  doi = {10.3390/sym14030573},
}
Figure