The Impact of Topographic Relief on Population and Economy in the Southern Anhui Mountainous Area, China

Zhen Yang, Yang Hong, Qingbiao Guo, Xuexiang Yu, Mingsong ZhaoSustainability 2022 · DOI

TL;DR

This study quantifies how topographic relief, along with slope and elevation, influences population and economic distribution in China's Southern Anhui mountainous region. It reveals that lower topographic relief areas concentrate population and economic activity, while high relief areas present significant challenges for development, underscoring the need for tailored regional policies.

What Problem Does This Paper Address?

Understanding the interplay between natural geography and human development is crucial for effective regional planning. Topographic relief, a fundamental aspect of physical geography, is known to influence where people live and how economies develop, particularly in complex terrains like mountainous regions. However, a precise, quantitative understanding of this relationship, especially at a fine-grained scale like county-level analysis, is still developing. This paper aims to fill this gap by specifically investigating how topographic relief, slope, and elevation impact population and economic density in the Southern Anhui mountainous area, a region characterized by its transition from mountains to plains. This understanding is vital for informing sustainable development strategies and addressing regional disparities.

Methods

The researchers employed a multi-step methodology to analyze the impact of topography. First, they used a Digital Elevation Model (DEM) with 30m resolution to extract topographic relief. A novel aspect of their approach is the use of "quadratic" mean change-point analysis to determine the optimal statistical unit for calculating topographic relief. This method aims to identify the most appropriate window size for analysis, moving beyond arbitrary choices. Once the optimal unit was established, topographic relief, slope, and elevation were extracted for each county. Socio-economic data, including population density and economic density (GDP per unit area), were then compiled. Finally, spatial statistics and correlation analysis, specifically fitting power function curves, were used to quantitatively assess the relationships between these topographic factors and the socio-economic indicators.

Datasets

  • Digital Elevation Model (DEM): 30m resolution data obtained from the Resource and Environment Science and Data Centre of the Chinese Academy of Sciences. This was used to derive topographic relief, slope, and elevation.
  • Administrative Boundaries: Sourced from the National Catalogue Service for Geographic Information of China.
  • Socio-economic Data (2020): Population density and GDP data for 35 county-level administrative units in the Southern Anhui mountainous area. This data was obtained from the Anhui Province statistical yearbook and statistical bulletins.

Key Insights and Ideas

  • Optimal Statistical Unit is Crucial: The paper highlights the importance of determining an appropriate scale (statistical unit) for topographic analysis. Their "quadratic" mean change-point analysis offers a more robust method for this than simpler approaches, leading to a more accurate representation of relief.
  • Topography as a "Double-Edged Sword": While low topographic relief is conducive to population and economic concentration, high relief areas present significant barriers. This isn't just about difficulty of access; it directly impacts agricultural mechanization, infrastructure development, and investment, creating a cycle of disadvantage.
  • Population vs. Economy: Topographic relief appears to have a stronger influence on population distribution than on economic development. This suggests that while people might be more constrained by terrain, economic activities can sometimes adapt or find niches even in challenging environments, though overall development is still hampered.
  • Primary Industry is Most Sensitive: The impact of topographic relief is most pronounced on primary industries (agriculture, forestry, etc.). This makes sense, as these sectors are directly tied to land characteristics and are less amenable to technological workarounds compared to secondary and tertiary industries.

Key Results

  • Dominant Topography: The Southern Anhui mountainous area is characterized by medium relief (200-500m), followed by small relief (70-200m), flat areas (0-30m), and slight relief (30-70m). Large relief (≥500m) is present but in smaller proportions.
  • Concentration in Low Relief Areas: A significant majority of the population (72.35%) and GDP (76.72%) are concentrated in areas with topographic relief of 155m or less, which constitute only 43.93% of the land area. Conversely, areas with relief greater than 245m (28.76% of land) host only 10.69% of the population and 8.34% of GDP.
  • Relief's Stronger Influence: Topographic relief showed a slightly stronger negative correlation with population density (R²=0.787) and economic density (R²=0.654) than slope or elevation.
  • Industry Specific Impacts: Topographic relief had the strongest negative correlation with primary industries, followed by tertiary and then secondary industries.

Limitations and Future Work

The authors acknowledge that their study, using county units, may mask finer spatial differences within these administrative areas, potentially leading to some uncertainty. They also note that the study relied on DEM data with a specific resolution (30m), and that studies using DEMs of varying resolutions are needed to understand how scale affects topographic relief extraction. Future work could involve developing spatial reconstruction models to analyze population and economy at a grid scale, using multiple data sources for more accurate and detailed analysis of topographic impacts. The paper also implicitly suggests the need for targeted poverty alleviation policies and strategies to improve living standards and effectively manage natural disasters in high-relief areas.

Summary updated

Abstract

Topographic relief is a key factor limiting population distribution and economic development in mountainous areas, especially in the transition zone from mountains to plains. Taking the southern Anhui mountainous area as an example, based on the digital elevation model (DEM) with a resolution of 30 m, we used ‘quadratic’ mean change-point analysis to calculate the optimal statistical unit, and then extracted the topographic relief. Taking the county as the unit of analysis, two indicators of population density and economic density were selected. Spatial statistics and correlation analysis were used to quantitatively analyze the impact of topographic relief on population and economy. Finally, the impact of slope and elevation was analyzed. The following results were obtained. (1) The topography of the study area was dominated by medium relief (200–500 m), followed by small relief (70–200 m), flat (0–30 m), and slight relief (30–70 m), and a small proportion of large relief (≥500 m). (2) The impact of topographic relief on population and economy was slightly stronger than that of slope and elevation. The impact on population distribution was stronger than that on economic development. The impact on primary industry was stronger than that on secondary and tertiary industries. (3) In the southern Anhui mountainous area, 72.35% of the population and 76.72% of GDP were distributed in the area with a topographic relief of 155 m or less, while the land area only accounted for 43.93%. The area with a topographic relief greater than 245 m accounted for 28.76%, but only 10.69% of the population, and only 8.34% of GDP. The population distribution and economic development were obviously concentrated in the low topographic relief area. However, the characteristics of high topographic relief not only hindered the agricultural mechanization and limited the development of the primary industry, but also had a significant impact on infrastructure development, investment, and industrial layout, thus weakening regional economic advantages. In the future, the economic level of these areas needs to be improved.
BibTeX
@inproceedings{yang2022impact,
  author = {Zhen Yang and Yang Hong and Qingbiao Guo and Xuexiang Yu and Mingsong Zhao},
  title = {{The Impact of Topographic Relief on Population and Economy in the Southern Anhui Mountainous Area, China}},
  booktitle = {Sustainability},
  year = {2022},
  doi = {10.3390/su142114332},
}
Figure