TL;DR
This study optimizes fracturing parameters (pump rate, pad fluid ratio, proppant intensity) for infill wells in a complex conglomerate reservoir to improve waterflooding efficiency. The research reveals that specific parameter combinations create short, wide fractures that enhance oil recovery while minimizing issues like water breakthrough and inter-well interference, and also details how these operations dynamically alter the in-situ stress field.
What Problem Does This Paper Address?
The Baikouquan Formation reservoir in the Bai 21 well block, a typical alluvial fan conglomerate, suffers from low porosity, low permeability, and strong heterogeneity. Decades of waterflooding have led to preferential flow channels and inefficient water circulation, pushing the reservoir into a "dual-high" stage (high water cut, high recovery). To maximize remaining oil potential, infill wells are being drilled and fractured. However, optimizing the complex interplay between hydraulic fracturing and waterflooding in such heterogeneous formations is challenging. Specifically, understanding how fracturing parameters influence fracture propagation, the subsequent waterflooding response, and the dynamic evolution of the in-situ stress field is crucial for effective development and avoiding issues like premature water breakthrough and reduced sweep efficiency.
Methods
The researchers employed a multi-faceted approach integrating:
- Geomechanical Modeling: A three-dimensional geomechanical model of the reservoir was established using rock mechanics test results, well-log interpretation, and seismic data. This model captures the reservoir's complex stress state.
- Fracturing Numerical Simulation: The Unconventional Fracture Model (UFM) was used to simulate hydraulic fracture propagation. This model couples fluid flow with solid elastic deformation, allowing for the representation of complex fracture networks.
- Reservoir Dynamic Analysis: The VISAGE finite element geomechanical simulator and the INTERSECT high-resolution reservoir simulator were used to model the coupled multi-physical field interactions, including fracture propagation, fluid flow, and stress evolution under long-term injection and production.
- Control Variable Method: To systematically investigate the influence of fracturing parameters, multiple simulation scenarios were designed, varying one parameter at a time (fracturing pump rate, pad fluid ratio, and proppant intensity) while keeping others constant.
Datasets
The study utilized field data from existing infill well fracturing operations for model validation, including treatment pressure, pumping rate, and sand concentration. Specific geological and geomechanical parameters for the Triassic Baikouquan Formation reservoir in the Bai 21 well block were also incorporated.
Key Insights and Ideas
- Fracture Geometry is Key to Sweep Efficiency: The study highlights that short, wide fractures are more beneficial in heterogeneous reservoirs than long, narrow ones. Short, wide fractures promote a more uniform waterflood front, leading to better sweep efficiency and avoiding rapid water channeling.
- Dynamic In-Situ Stress Evolution: The research reveals that the in-situ stress field doesn't remain static during injection and production. Injection wells experience a temporary stress increase followed by a decrease, while production wells see a continuous stress decline. This dynamic change is significant for understanding fracture stability and future re-fracturing potential.
- Synergy is Crucial: The paper strongly emphasizes the need for synergistic optimization of fracturing and waterflooding. Simply creating large fractures without considering the waterflooding response can lead to detrimental outcomes like water channeling and reduced oil recovery.
- Parameter Interdependence: While individual parameters are analyzed, the results implicitly show their interconnectedness. For example, increasing pump rate can lead to longer fractures, but this needs to be balanced with pad fluid ratio and proppant intensity to achieve the desired short, wide fracture characteristics.
Key Results
The study identified optimal ranges for key fracturing parameters:
- Pumping Rate: 3.5–4.0 m³/min. This range creates fractures with half-lengths of 40–45 m and widths of at least 5.0 mm, balancing fracture extension with controlled growth. Higher rates (4.5 m³/min) led to excessive fracture length, increased risk of water channeling, and inter-well interference.
- Pad Fluid Ratio: 40–50%. This range balances fracture length and width, promoting effective conductivity while controlling vertical growth. A lower ratio (30%) resulted in insufficient stimulation, while a higher ratio (60%) led to excessive length and potential water channeling.
- Proppant Intensity: 3.0–4.0 m³/m. This range enhances fracture conductivity by providing better support to fracture walls, leading to optimal oil production. Higher intensities (5.0 m³/m) resulted in excessive fracture growth and interference, while lower intensities (2.0–3.0 m³/m) limited fracture coverage and conductivity.
The stress field simulations showed:
- Stress near injection wells initially increased and then decreased by 9.3%.
- Stress around production wells continuously decreased by up to 37.3%.
Limitations and Future Work
- Simulation-Based: The authors acknowledge that the conclusions are primarily based on simulations under specific geological and engineering conditions.
- Future Work: They suggest that future research should focus on validating these findings with more actual field data and exploring dynamic control methods for fracture network-injection-production synergy across different reservoir conditions. Further research into optimizing candidate wells/layers for re-fracturing based on stress field evolution is also implied.
Summary updated