The Hot and Energetic Universe: The Wide Field Imager (WFI) for Athena+

A. Rau, Norbert Meidinger, K. Nandra, M. Porro, D. Barret, A. Santangelo, Christian Schmid, L. Strüder, C. Tenzer, J. Wilms, C. Amoros, Robert Andritschke, Florian Aschauer, Alexander Bähr, B. Günther, Maria Fürmetz, Beat Ott, E. Perinati, D. Rambaud, Jonas Reiffers, J. Treis, A. von Kienlin, G. WeidenspointnerarXiv 2013 · DOI · arXiv

Abstract: The Wide Field Imager (WFI) is one of the two scientific instruments proposed for the Athena+ X-ray observatory. It will provide imaging in the 0.1-15 keV band over a wide field, simultaneously with spectrally and time-resolved photon counting. The instrument is designed to make optimal use of the grasp (collecting area times solid angle product) provided by the optical design of the Athena+ mirror system, by combining a sensitive approx. 40' diameter field of view DEPFET detector with a pixel size properly sampling the angular resolution of 5 arc sec on-axis. This synthesis makes the WFI a very powerful survey instrument, significantly surpassing currently existing capabilities. In addition, the WFI will provide unprecedented simultaneous high-time resolution and high count rate capabilities for the observation of bright sources with low pile-up and high efficiency.

Introduction: Addressing the "Grasp" Gap

To understand the formation of large-scale structures and the growth of supermassive black holes, astronomers require X-ray observations with significantly higher "grasp"—the product of collecting area and field of view. Current observatories like Chandra and XMM-Newton face a trade-off between high angular resolution over small fields and susceptibility to "pile-up" (where multiple photons strike the same pixel during one exposure) when observing bright sources. Additionally, standard CCDs are vulnerable to radiation damage that degrades performance over time. The Wide Field Imager (WFI) for Athena+ addresses these challenges using advanced DEPFET sensor technology.

Instrument Design and Methodology

The core of the WFI is the DEPFET (DEpleted P-channel Field Effect Transistor) active pixel sensor. Unlike traditional CCDs that shift charge across the chip to a readout node, each DEPFET pixel integrates the detector and the first stage of amplification.

The DEPFET Active Pixel Sensor

In a DEPFET pixel, incident X-rays generate electron-hole pairs within a 450 µm thick silicon bulk. The electrons are collected in an "internal gate" located directly beneath the transistor channel. The presence of this charge modulates the transistor's conductivity, allowing the energy of the photon to be measured in place. This architecture is inherently radiation-hard because it avoids the Charge Transfer Inefficiency (CTI) issues common in CCDs.

Cross-section of a DEPFET pixel. X-ray generated electrons are collected in the 'internal gate' (deep n-doping), modulating the FET current.

Innovation: The Gateable Shutter

A key innovation for the WFI is the "gateable" DEPFET. By incorporating a specific implantation, researchers created a fast internal shutter. This allows the sensor to "ignore" photons hitting the pixel during the readout phase, virtually eliminating "out-of-time" events that cause spectral distortion in traditional sensors.

Comparison of 55Fe spectra under normal and gated operation. Gated operation eliminates the 'negative misfit background' and improves spectral clarity.

Focal Plane and Readout

The WFI uses a mosaic of chips to cover a wide field of view (baseline 40’ x 40’). A specialized central chip (256x256 pixels) is optimized for high-speed timing of bright sources, while four larger outer chips provide wide-field coverage. By utilizing a "drain-readout" mode, the system achieves a readout time of just 2 µs per row, enabling high-speed observations with minimal data loss.

Key Performance and Results

Laboratory calibration and simulations confirm the WFI's superior performance:

  • Energy Range: 0.1 to 15 keV.
  • Spectral Resolution: 125 eV (FWHM) at 5.9 keV, reaching the theoretical Fano limit for silicon.
  • Throughput: Capable of handling sources as bright as 1 Crab with >80% throughput and <5% pile-up.
  • Effective Area: Approximately 1.7 m² at 1 keV, a tenfold improvement over previous missions.

Challenges and Future Work

While the underlying technology is mature, the transition to the larger Athena+ mission scale introduces engineering hurdles. The physical size of the required optical blocking filters has nearly doubled, requiring careful design to ensure stability during launch. Future work will focus on optimizing the focal plane layout by folding electronics to the backside of the central chip and finalizing the mechanical assembly of the filter wheel.

Summary updated

Abstract

The Wide Field Imager (WFI) is one of the two scientific instruments proposed for the Athena+ X-ray observatory. It will provide imaging in the 0.1-15 keV band over a wide field, simultaneously with spectrally and time-resolved photon counting. The instrument is designed to make optimal use of the grasp (collecting area times solid angle product) provided by the optical design of the Athena+ mirror system (Willingale et al. 2013), by combining a sensitive approx. 40' diameter field of view (baseline; 50' goal) DEPFET detector with a pixel size properly sampling the angular resolution of 5 arc sec on-axis (half energy width).This synthesis makes the WFI a very powerful survey instrument, significantly surpassing currently existing capabilities (Nandra et al. 2013; Aird et al. 2013). In addition, the WFI will provide unprecedented simultaneous high-time resolution and high count rate capabilities for the observation of bright sources with low pile-up and high efficiency. In this paper, we summarize the instrument design, the status of the technology development, and the baseline performance.
BibTeX
@misc{rau2013hot,
  author = {A. Rau and Norbert Meidinger and K. Nandra and M. Porro and D. Barret and A. Santangelo and Christian Schmid and L. Strüder and C. Tenzer and J. Wilms and C. Amoros and Robert Andritschke and Florian Aschauer and Alexander Bähr and B. Günther and Maria Fürmetz and Beat Ott and E. Perinati and D. Rambaud and Jonas Reiffers and J. Treis and A. von Kienlin and G. Weidenspointner},
  title = {{The Hot and Energetic Universe: The Wide Field Imager (WFI) for Athena+}},
  year = {2013},
  eprint = {1308.6785},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/1308.6785},
}
The Hot and Energetic Universe: The X-ray Integral Field Unit (X-IFU) for Athena+arXiv · 2013
The Lobster Eye Imager for Astronomy Onboard the SATech-01 SatellitearXiv · 2023
X-ray performance of a customized large-format scientifc CMOS detectorarXiv · 2022
The LOFT wide field monitorProceedings of Spie, the International Society for Optical Engineering/proceedings of Spie · 2012
The eROSITA X-ray telescope on SRGSpringer Link (chiba Institute of Technology) · 2021
Instrumental and scientific simulations of the LOFT wide field monitorProceedings of Spie, the International Society for Optical Engineering/proceedings of Spie · 2014
Figure