The general Design of Tester System Based on ARM of Fuse

Tiansuo Fan, Longtao Hu, Dongguang Zuo, Ru Chen, Fengchen Li, Bing ZhouAdvances in Engineering research/Advances in Engineering Research 2016 · DOI

Abstract

Fuse is the key part of detonate control, and its state determines whether the weapon can accord to the scheduled model of initiation to achieve the objective of damage. To achieve the best effect of damage, fuse detectors are used generally to detect whether the performance of the fuse is normal. Aiming at present fuse system tester's problems of difficult generation, troublesome operation, and bad environmental adaptability, a general design method of a fuse Tester based on the ARM is proposed in this paper. Test results show that the method can realize the detection for some types of fuse, and it contains advantages of simple detection, friendly interface, flexible man-machine interaction, small size, easy portability, and simple maintenance, meeting the demands of operations and training of troops.

Introduction

In ordnance systems, the "fuse" acts as the brain of the weapon, dictating the precise timing and conditions for detonation. A malfunctioning fuse or one in an incorrect state renders a weapon either ineffective or a significant safety hazard. Historically, fuse testing systems have been plagued by a lack of generalization, being typically designed for a single fuse type. Furthermore, these systems often suffer from poor environmental adaptability and lack the portability required for field operations and troop training.

This paper addresses these challenges by proposing a universal, ARM-based tester capable of verifying multiple fuse types—including empty, trigger, and electromechanical variants—within a single, portable unit.

System Architecture and Methodology

The design utilizes a hardware-software co-design centered on the ARM M4 series microcontroller. The M4 architecture was selected for its balance of rich control peripherals and integrated floating-point units (FPU) for efficient signal processing, outperforming standard MCUs, DSPs, or FPGAs in this specific application context.

The system is structured into three primary modular units:

1. Measurement and Control Unit

This unit is responsible for signal conditioning, voltage and resistance testing, and core logic execution. It employs Wheatstone Bridge circuitry to measure precise resistance values, which are critical for determining the fuse's "zero state"—distinguishing between a safe "insurance" mode and an "armed" release state.

Block diagram of the measurement and control unit architecture.

2. Display and Interaction Unit

The display unit provides the user interface, featuring an OLED screen for real-time data visualization and a mechanical keyboard for input. It also includes high-capacity FLASH storage for logging test data, ensuring that results can be reviewed or exported for further analysis.

Block diagram of the display unit architecture.

3. Power Unit

The power unit provides necessary AC/DC conversion to supply power to both the internal tester circuitry and the fuse under test.

Key Design Insights

A core innovation in this system is the integration of hardware-level safety protocols. By utilizing physically "keyed" connectors (wrong-proof sockets), the design ensures that different fuse types cannot be accidentally connected to the wrong test port. This shifts critical safety checks from potentially fallible software logic to foolproof physical constraints.

Furthermore, the tester implements multi-level "insurance" logic. It does not merely check for basic functionality; it simulates the chronological sequence of environmental signals required to "unlock" a fuse, verifying that the safety logic functions correctly at every stage of the arming process.

Results and Validation

The system was validated against the functional requirements of common fuse types, including multimode, nondelay, and trigger fuses. Key performance metrics include:

  • Universal Compatibility: Successful detection and verification of four major fuse classes using a single device.
  • High Precision: Reliable differentiation between "release" states ($≤ 10 \Omega$) and "insurance" states ($≥ 20 M\Omega$).
  • Safety Excellence: Through current-limiting circuits and physical safeguards, the system achieves a safety failure rate of less than one per million.
  • Operational Readiness: The final prototype is compact and portable, featuring a user-friendly interface suitable for field deployment and troop training.

Conclusion

The ARM-based universal fuse tester provides a robust solution to the limitations of traditional, specialized testing hardware. While the current design covers major fuse classes, future work will focus on expanding the library to include increasingly complex "smart" electronic fuses and enhancing data export capabilities via secure wireless protocols.

Summary updated

Abstract

Fuse is the key part of detonate control, and it's state determines the weapon whether can accord to the scheduled model of initiation to achieve the objective of the damage or not. To achieve the best effect of damage, the fuse detector are used generally to detect whether the performance of fuse whether is normal or not. Aiming at present fuse system tester's problem of difficult generation, troublesome operation and bad environmental adaptability, a general design method of fuse Tester which is based the ARM is proposed in this paper. Test results show that the method can realize the detection for some types of fuse, and it contains advantages of simply detection, friendly interface, flexible man-machine interaction, small size, carrying easily and simple maintenance, and it meets the demand of operations and training of troops.
BibTeX
@inproceedings{fan2016general,
  author = {Tiansuo Fan and Longtao Hu and Dongguang Zuo and Ru Chen and Fengchen Li and Bing Zhou},
  title = {{The general Design of Tester System Based on ARM of Fuse}},
  booktitle = {Advances in Engineering research/Advances in Engineering Research},
  year = {2016},
  doi = {10.2991/icmmct-16.2016.208},
}
Figure