Abstract
Gravitational Wave High-energy Electromagnetic Counterpart All-sky Monitor (GECAM), consisting of two micro-satellites, is designed to detect gamma-ray bursts associated with gravitational-wave events. Here, we introduce the real-time burst alert system of GECAM, with the adoption of the BeiDou-3 short message communication service. We present the post-trigger operations, the detailed ground-based analysis, and the performance of the system. In the first year of the in-flight operation, GECAM was triggered by 42 GRBs. GECAM real-time burst alert system has the ability to distribute the alert within $\sim$1 minute after being triggered, which enables timely follow-up observations.
Introduction
In the era of multi-messenger astronomy, speed is paramount. When gravitational wave (GW) detectors like LIGO/Virgo sense a massive collision, such as a neutron star merger, they provide a relatively large and imprecise "search area" in the sky. To understand the physics of these mergers, astronomers must quickly find the electromagnetic counterpart, often appearing as a high-energy Gamma-Ray Burst (GRB).
However, these bursts fade rapidly. Traditional satellite missions often face delays of several hours while waiting for a ground station pass to downlink trigger data. The GECAM mission addresses this latency problem by introducing a novel real-time burst alert system that leverages the BeiDou-3 navigation satellite constellation's short message service. This allows GECAM to distribute alerts to the global astronomy community within approximately one minute of detection, a critical capability for catching rapidly fading counterparts.
Methods and System Architecture
The GECAM system consists of two micro-satellites, GECAM-A and GECAM-B, positioned on opposite sides of the Earth to provide full-sky coverage. The system architecture integrates onboard triggering, real-time data relay, and sophisticated ground-based analysis.
Onboard Triggering and Data Relay
The satellites utilize the GECAM In-flight Real-time Trigger and Localization Software (GIRTLS), which runs 64 different trigger algorithms simultaneously. These algorithms monitor background count rates across various energy ranges and timescales, ranging from 50ms to 4s.
Instead of waiting for traditional ground station visibility, GECAM uses the BeiDou-3 navigation constellation as a relay. It sends small "short messages" (560 bits each) containing trigger time, location, and light curves back to Earth in real-time. This bypasses the traditional bottleneck of ground-station visibility.
Ground-Based Analysis (BAS)
Once the short messages arrive at the Institute of High Energy Physics (IHEP), the Burst Alert System (BAS) performs a detailed analysis. This includes recursive non-parametric regression to estimate backgrounds and iterative spectral fitting to refine the source's location. Because a detector's response depends on the angle of the incoming light, the system must fit the burst's energy spectrum and its sky position simultaneously until the position converges.
For events observed by both satellites or other missions like Fermi, the system can also employ the time-delay method (triangulation) to create a high-precision localization annulus.
Results and Performance
The performance of the GECAM system was evaluated using data from its first year of in-flight operation in 2021, primarily focusing on 858 in-flight triggers recorded by GECAM-B.
Alert Latency and Reliability
The system successfully distributes alerts within approximately one minute of a trigger. The average latency for the first message is 45 seconds, with a minimum recorded latency of 25 seconds. The BeiDou-3 short message transmission achieved a high success rate of 94.6%, despite power constraints that required the satellite to be turned off periodically.
Detection and Localization Accuracy
In its first year, GECAM detected 42 verified GRBs, 32 bursts from Soft Gamma Repeaters (SGRs), and one X-ray burst. The accuracy of these localizations was validated against "ground truth" positions from established missions like Fermi-GBM, Swift-BAT, and the InterPlanetary Network (IPN). Approximately 68% of the in-flight and ground-refined localizations were within ~9° of the reference positions, establishing GECAM as a competitive wide-field monitor.
Discussion and Future Outlook
The successful use of a navigation satellite constellation for scientific data transmission represents a significant advancement in reducing alert latency. By using Charged Particle Detectors (CPD) alongside Gamma-Ray Detectors (GRD), the system effectively filters out false triggers caused by high-radiation environments like the South Atlantic Anomaly (SAA).
Despite these successes, the mission faced hardware challenges. A power supply issue on GECAM-A prevented its payload from operating, and GECAM-B is limited to approximately 10 hours of operation per day due to power constraints. These factors have limited the full realization of dual-satellite triangulation using GECAM assets alone. Additionally, early thermal noise issues affecting the Silicon Photomultipliers (SiPM) were mitigated by adjusting low-energy thresholds.
Future work focuses on integrating GECAM notices into the Gamma-ray Coordinates Network (GCN) and preparing for the upcoming O4 observing run of the global gravitational wave detector network (LIGO/Virgo/KAGRA).
Summary updated