The Formation and Stationary Maintenance of Peaked Pressure Profiles in Turbulent Tokamak Plasmas

В. П. Пастухов, Dmitriy Smirnov, Н. В. ЧудинPlasma 2023 · DOI

TL;DR

Researchers have demonstrated a theoretical pathway to significantly enhance tokamak performance by manipulating the plasma's current profile. By ramping down inductive current while simultaneously applying localized microwave heating and current drive, simulations of the T-10 and T-15MD tokamaks show a two-fold increase in core temperatures and improved energy confinement without increasing total heating power.

What Problem Does This Paper Address?

The "holy grail" of nuclear fusion is achieving high-pressure, high-temperature plasma confinement for long durations. In tokamaks, this is often hindered by turbulent transport—chaotic eddies that leak heat and particles out of the magnetic "bottle."

Standard operating regimes (like those planned for the ITER reactor) typically target a "safety factor" ($q_b$)—a measure of magnetic field line twist—between 3 and 4 at the plasma edge. However, these standard modes often result in relatively flat pressure profiles. The authors address the challenge of creating and maintaining "peaked" pressure profiles (where the center is much hotter and denser than the edges) which are known to improve overall energy confinement but are difficult to sustain in a stationary state.

Methods

The authors utilize a sophisticated, self-consistent simulation suite called the CONTRA-ASTRA-SPIDER code system. This system integrates three critical components:

  1. Turbulent Transport (CONTRA-T): Uses an "adiabatically-reduced dynamic model" (ARD-model) to simulate how plasma self-organizes into "canonical" profiles.
  2. Equilibrium (SPIDER): Solves the Grad–Shafranov equation to determine the 2D magnetic structure of the plasma.
  3. System Linkage (ASTRA): Acts as the "interlink" that calculates currents, metrics, and time evolution.

The core strategy involves a significant ramp-down of the inductive current ($I_{ind}$) provided by the tokamak's central solenoid. To prevent the plasma from becoming unstable during this ramp-down, they switch on central Electron Cyclotron Resonance Heating (ECRH) and Electron Cyclotron Current Drive (ECCD). This localized current drive ensures the safety factor at the magnetic axis ($q_0$) stays near 1, preventing "sawtooth" instabilities while allowing the edge safety factor ($q_b$) to rise sharply.

Datasets

The study does not use external "big data" sets but rather relies on high-fidelity physical parameters from two specific Russian tokamak facilities:

  • T-10: A well-studied medium-sized tokamak used to validate the model against previous experimental observations.
  • T-15MD: A newer, more advanced tokamak with a non-circular (D-shaped) cross-section and a divertor, used to test the model's scalability to modern reactor designs.

The "data" produced consists of time-evolution scenarios (shots) comparing baseline constant-current operations against the proposed current-reduction scenarios.

Key Insights and Ideas

  • The $q_b/q_0$ Lever: The primary insight is that the ratio of the edge safety factor to the axial safety factor is a powerful "knob" for confinement. Increasing this ratio forces the plasma into a more "peaked" state.
  • Canonical Profiles: The paper leans on the theory of plasma self-organization. It suggests that if the current profile is maintained correctly, the turbulent nature of the plasma actually helps it relax into a high-performance "canonical" pressure state.
  • Efficiency through Distribution: You don't necessarily need more power to get a hotter core; you need a better current distribution. By reducing total current but concentrating it at the axis via ECCD, the core temperature can double even if the total heating power remains constant.
  • Stability Maintenance: Ramping down current usually risks instabilities, but the authors show that localized ECCD can "pin" the central safety factor at $q_0 \approx 1$, keeping the plasma stable even as the total current drops by a factor of four.

Key Results

  • Temperature Doubling: In T-10 simulations, a four-fold decrease in inductive current led to an approximately two-fold enhancement of both electron ($T_e$) and ion ($T_i$) temperatures at the axis compared to standard shots.
  • Confinement Gains: The energy confinement time ($\tau_E$) improved by 13% in T-10 and 28% in T-15MD scenarios when the current was ramped down and ECCD was applied.
  • Safety Factor Extremes: In T-15MD, the $q_b/q_0$ ratio was pushed from a baseline of ~5.6 to as high as 13.3, resulting in a highly peaked and efficient pressure profile.
  • Magnetic Structure: Despite the high pressure peaking, the 2D magnetic surface distortions (Shafranov shift) remained within acceptable limits for stable operation.

Limitations and Future Work

  • Density "Pump-out": The authors acknowledge that real-world ECRH often causes a "pump-out" effect where central plasma density drops. This simulation assumed a fixed density profile (the "TR-state"), which might be overly optimistic.
  • Inductive Savings: While the model shows great performance, it requires careful control of "volt-seconds" in the inductor. The authors plan to investigate even lower inductive currents, potentially moving toward fully non-inductive (steady-state) operation.
  • Equilibrium Monitoring: As the peaking increases, the distortion of magnetic surfaces becomes more pronounced. Future work will need to monitor these distortions more closely to ensure they don't lead to a loss of equilibrium.

Summary updated

Abstract

Abstract The theoretical model for increasing peaking of radial distribution of plasma thermal energy and plasma energy confinement time improvement due to the formation of current profiles those provide the increased value of the safety factor $${{q}_{b}}$$ at the outer plasma boundary is considered. The model for the formation and stationary maintenance of the peaked current density profiles those ensure the maintenance of plasma column equilibrium state with increased $${{q}_{b}}$$ value and conservation of $${{q}_{0}} \approx 1$$ at the magnetic axis is developed. The model is based on the significant ramp down of the $${{I}_{{{\text{ind}}}}}$$ current maintained by the inductor with simultaneous central ECR heating and electron cyclotron current drive (ECCD) switching on. It is shown by the computer simulations of the self-consistent time evolution of turbulent plasma for the conditions of T-10 and T-15MD tokamaks that in the shot scenarios with three- or four-fold decrease in the $${{I}_{{{\text{ind}}}}}$$ current at the ECRH stage of shots it was achieved an approximately two-fold enhancement of the electron and ion temperatures at the axis of the plasma column as compared to the standard shots with the same heating powers.
BibTeX
@inproceedings{2023formation,
  author = {В. П. Пастухов and Dmitriy Smirnov and Н. В. Чудин},
  title = {{The Formation and Stationary Maintenance of Peaked Pressure Profiles in Turbulent Tokamak Plasmas}},
  booktitle = {Plasma},
  year = {2023},
  doi = {10.1134/s1063780x23600603},
}
Figure