The effect of air-bearing surface roughness on avalanche test

Geng Wang, Yufeng Li, Hyung J. LeeJournal of Applied Physics 2000 · DOI

Abstract

The traditional method of glide height measurement is used for avalanche height evaluation. The air-bearing surface (ABS) of the avalanche head is assumed to be perfectly flat. This assumption, however, is not appropriate for today’s drive. In addition, a glide avalanche head normally has a different surface finish than that of a real recording head. So what an avalanche head is “seeing” on the disk surface may not be what a real head “sees” in the drive. Therefore, it becomes extremely important that one can correctly report the true avalanche height. In this study, we proposed one possible way of doing so by correctly calibrating the flying height of a glide head and the defining glide avalanche contact as “0.02% bearing depth.”
BibTeX
@article{wang2000effect,
  author = {Geng Wang and Yufeng Li and Hyung J. Lee},
  title = {{The effect of air-bearing surface roughness on avalanche test}},
  journal = {Journal of Applied Physics},
  year = {2000},
  doi = {10.1063/1.372647},
}

Loading related content...

Figure