The Development of Single Star Scidar for Tibet and Dome A

Liyong Liu, Hongshuai Wang, Jia Yin, J. Vernin, Yongqiang Yao, Xuan QianarXiv 2013 · DOI · arXiv

Abstract

A Single Star Scidar (SSS) system has been developed for remotely sensing atmospheric turbulence profiles. The SSS computes the spatial auto/cross-correlation functions of short-exposure images of scintillation patterns produced by a single star, providing vertical profiles of optical turbulence intensity $C_n^2(h)$ and wind speed $V(h)$. Requiring only a 40 cm aperture telescope, the SSS is highly portable and suitable for deployment at remote candidate sites. Initial experiments in Beijing and at the Xinglong station of NAOC have successfully retrieved atmospheric profiles up to 30 km. Future work focuses on automating the system for remote operation via the internet at extreme sites in Tibet and Dome A, Antarctica.

Introduction

For ground-based astronomy, atmospheric optical turbulence is a significant technical hurdle, distorting light and limiting the resolution of large telescopes. To optimize Adaptive Optics (AO) systems or select ideal locations for future observatories, scientists require detailed vertical profiles of turbulence ($C_n^2(h)$) and wind speed ($V(h)$).

Traditionally, Scidar (SCIntillation Detection and Ranging) has been the gold standard for these measurements. However, traditional systems typically require telescopes with apertures larger than 1 meter and often rely on observing binary stars. This bulkiness makes them difficult to deploy to remote, infrastructure-poor locations. The Single Star Scidar (SSS) addresses this by utilizing a single star and a portable 40 cm telescope, making high-resolution atmospheric profiling feasible for remote field expeditions.

Methodology and Hardware

The SSS system analyzes scintillation patterns—the "shadow bands" of light—produced by a single star. The hardware setup consists of a 40 cm Meade LX200 telescope mounted on a portable equatorial mount, equipped with a high-speed Pixelfly CCD camera to capture short-exposure images.

The portable SSS hardware setup featuring a 40cm Meade telescope and associated computing equipment.

Signal processing involves computing spatial auto-correlation and cross-correlation functions of these images in real-time. To reconstruct the vertical profiles from these patterns, the team employs a simulated annealing algorithm. This optimization technique finds the best fit between observed scintillation and theoretical models to accurately map atmospheric layers.

Experimental Results

The system was validated through initial trials in Beijing (2010) and extensive field testing at the Xinglong Station of the National Astronomical Observatories of China (NAOC) between April and September 2011. Located at an altitude of 950m, Xinglong provided a diverse atmospheric environment for testing.

Temporal evolution "waterfall" plots showing atmospheric turbulence (left) and wind speed (right) profiles up to 30km at Xinglong station.

The SSS successfully retrieved profiles from ground level up to 30 km. As shown in the temporal "waterfall" plots, the system can map how turbulence layers shift over time, providing a dynamic view of the atmosphere. The simulated annealing process proved highly effective, with a close match observed between reconstructed and theoretical cross-correlation patterns.

Key Insights and Future Outlook

The development of the SSS demonstrates that high-resolution vertical profiling is possible without 1-meter-class facilities. By reducing the aperture requirement to 40 cm and utilizing single stars, the system gains significant versatility in target selection and logistical ease. Beyond simple "seeing" values, the SSS provides a comprehensive suite of parameters, including coherence length ($r_0$), coherence time ($ au_0$), and the isoplanatic angle ($ heta_0$).

Future work is directed toward full automation. The extreme conditions of the Tibetan plateau and Dome A in Antarctica necessitate a "friendly" auto-SSS system capable of remote operation via the internet. Hardening the hardware for ultra-cold, low-pressure environments will be critical for long-term monitoring and final site selection for China's next generation of giant telescopes.

Summary updated

Abstract

A Single Star Scidar system(SSS) has been developed for remotely sensing atmospheric turbulence profiles. The SSS consists of computing the spatial auto/cross-correlation functions of short exposure images of the scintillation patterns produced by a single star, and provides the vertical profiles of optical turbulence intensity C2n(h) and wind speed V(h). The SSS needs only a 40 cm aperture telescope, so that can be portable and equipped easily to field candidate sites. Some experiments for the SSS have been made in Beijing last year, successfully retrieving atmospheric turbulence and wind profiles from the ground to 30 km. The SSS observations has recently been made at the Xinglong station of NAOC, characterizing atmospheric parameters at this station. We plan to automatize SSS instrument and run remote observation via internet; a more friendly auto-SSS system will be set up and make use at the candidate sites in Tibet and Dome A.
BibTeX
@misc{liu2013development,
  author = {Liyong Liu and Hongshuai Wang and Jia Yin and J. Vernin and Yongqiang Yao and Xuan Qian},
  title = {{The Development of Single Star Scidar for Tibet and Dome A}},
  year = {2013},
  eprint = {1303.4578},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/1303.4578},
}
Figure