THE DESIGN PARAMETERS OF A BOOT NODE OF THE DISINTEGRATOR AT INSTALLATION OF PIPE RECYCLE MATERIAL

И А Семикопенко, Vitaliy- Voronov-, Dmitriy SmirnovBulletin 2019 · DOI

Abstract

Disintegrators are essential equipment for grinding, mixing, and activating various materials. A primary advantage of these systems is the ability to produce a grinding product with a specific granulometric composition. To achieve a narrow particle size distribution, researchers have developed an experimental unit featuring a recycling pipe. This pipe unloads the finished product while returning oversized "grits" to the chamber for additional grinding. This paper presents a theoretical study aimed at coordinating the throughput of the loading unit and the recycle node. By assuming a linear change in bulk density within the recycling pipe, an analytical expression was derived to determine the optimal radius of the modernized feeder based on the disintegrator's constructive and technological parameters.

The Challenge of Mass Flow Balance

Achieving a uniform particle size in high-speed impact mills requires precise control over the material's path. While a recycling pipe effectively catches oversized particles, it introduces complexity to the machine's internal physics. For stable operation, the mass flow rate through the feeder must be perfectly synchronized with the capacity of the grinding elements and the volume of material returning through the recycle loop. If these components are not balanced, the system risks inefficiency or clogging.

Schematic diagram of the modernized disintegrator showing the loading unit, grinding chamber, and the curved recycle pipe (labeled with radius R and diameter d).

Theoretical Modeling and Methods

The authors employed a theoretical approach based on fluid dynamics and mass conservation to solve this balancing act. The movement of material inside the curved recycle pipe—a rubber-fabric pipe of circular cross-section—was modeled as a two-phase medium consisting of air and solid particles.

To make the complex integration of mass flow tractable, the researchers assumed that the bulk density of the material changes linearly as it moves along the radius of the curved pipe. The model accounts for several critical factors:

  • Centrifugal Forces: Impacting the material as it traverses the curve.
  • Air Resistance: Factoring in dynamic viscosity.
  • Physical Properties: Including particle density and diameter.

By integrating the mass flow rate ($Q_{kp}$) across the pipe's cross-section and setting it against the primary feed rate, a comprehensive balance equation was established. This equation links the feeder's geometry directly to operational parameters such as rotor speed ($\omega$), friction coefficients ($f$), and the pipe's radius of curvature ($R$).

Key Results and Design Insights

The primary outcome of this research is a closed-form analytical expression that defines the relationship between the original feeder radius ($R_{on}$) and the modified radius ($R_{om}$) required for a system with a recycle loop. This allows engineers to move away from "trial and error" prototyping and calculate optimal dimensions during the design phase.

A 3D surface plot illustrating how the ratio of feeder radii changes in response to the recycle pipe's radius of curvature (R) and diameter (d).

Graphical analysis of the derived expression reveals an inverse relationship: as the recycle pipe’s radius of curvature ($R$) and its diameter ($d$) increase, the ratio of the required feeder radii decreases. This suggests that a more efficient recycle system (characterized by a larger diameter or a gentler curve) allows for a more precisely tuned primary feed input, maintaining equilibrium without overloading the grinding chamber.

Conclusion and Future Directions

This study provides a mathematical foundation for optimizing disintegrator loading units. By establishing that the feeder radius is mathematically "locked" to the geometry of the recycle pipe, the authors offer a clear path for improving machine efficiency.

Future work should focus on validating these theoretical findings with extensive empirical data from the experimental unit. Additionally, exploring non-linear density distributions and the behavior of highly cohesive or irregularly shaped materials would further refine the model for diverse industrial applications.

Summary updated

Abstract

Currently, disintegrators are equipment used for grinding, mixing and activation of a number of materials. The possibility of obtaining a grinding product with a given granulometric composition is one of the advantages of disintegrators. An experimental unit with a recycling pipe is created to obtain a narrow granulometric composition of the grinding product. It provides unloading of the finished product and returning the grits for additional grinding to the chamber. The branch pipe of the recycle is a rubber-fabric pipe of circular cross-section with a radius of curvature, which ensures the movement of a two-phase medium from the discharge zone to the loading part of the disintegrator. When performing theoretical studies of the grinding process, it is necessary to coordinate the throughput of the loading unit and the node of the disintegrator recycle. In addition, the mass flow rate of the material through the feeder and the mass flow rate of the material (throughput) passing through the rows of percussion elements must be the same for the balanced operation of the disintegrator and the feeder. The mass flow capacity of the coarse material moving in the recycling pipe is determined based on the assumption of the linear nature of the change in bulk density when the material moves inside the recycling pipe. In result of theoretical researches, the analytical expression is received allowing to define a radius of a pipe of the modernized feeder proceeding from constructive and technological parameters of a disintegrator with a branch pipe of a recycle. A calculation scheme for determining the radius of the pipe of an improved disintegrator is presented. The analysis of obtained analytical expression allows to conclude that the radius of the pipe of the modernized unit is associated with the design and technological parameters of the disintegrator
BibTeX
@article{2019design,
  author = {И А Семикопенко and И А Семикопенко and Vitaliy- Voronov- and V. P. Voronov and Dmitriy Smirnov and Dmitriy Smirnov},
  title = {{THE DESIGN PARAMETERS OF A BOOT NODE OF THE DISINTEGRATOR AT INSTALLATION OF PIPE RECYCLE MATERIAL}},
  journal = {Bulletin},
  year = {2019},
  doi = {10.34031/article\_5cd6df492da642.78472895},
}
Figure