The Design and Lateral Fluctuate Analysis of a New Double-Pitch Silent Chain for Conveyors

Wencheng Wang, Xiaolun Liu, Jiajun Liu, Jianfang Liu, Lu Jiguang, Bin YeResearch 2013 · DOI

Abstract

Traditional double-pitch roller chains used in conveyor systems often suffer from significant lateral fluctuations due to the polygon effect and meshing impacts. This paper proposes a new double-pitch silent chain design utilizing an "M-plate" structure and "time-shared meshing" theory. Simulation results indicate that this design reduces lateral fluctuations by approximately 3.5 times compared to traditional roller chains, offering a smoother and more stable conveying process.

Introduction

Conveyor systems are integral to industrial manufacturing, yet the standard double-pitch roller chains they employ are plagued by mechanical inefficiencies. The "polygon effect"—where the chain moves as a series of straight chords rather than a circle—induces vertical vibrations known as lateral fluctuations. These vibrations increase mechanical wear and can lead to product damage or rejection. While silent chains offer smoother operation, their standard configurations are often too heavy for long-distance conveyors. This research introduces a lightweight double-pitch silent chain designed to mitigate these issues.

Design and Theory

The core of the innovation lies in the M-plate geometry and the time-shared meshing theory. The chain plate is designed with a specific convex flank to manage the impact of engagement.

Geometric parameters of the proposed M-plate design, showing the complex tooth profile required for time-shared meshing.

The "time-shared meshing" process splits the mechanical impact into two phases:

  1. Inner Engagement: The inside convex curve of the tooth contacts the sprocket first.
  2. Outer Engagement: As rotation continues, the contact point shifts, reducing impact velocity before the outside straight flank takes the full load.

This phased approach dampens the peak impact forces that typically drive vibration.

Analysis of Lateral Fluctuation

Lateral fluctuation ($y_i$) is the primary metric for evaluating conveying stability. The polygon effect causes the chain's pitch line to rise and fall as it moves across the sprocket teeth.

Schematic of lateral displacement ($y_i$) and pitch variations ($P_{ti}$) illustrating the vertical movement inherent in chain drives.

The researchers conducted a dynamic simulation comparing the new silent chain against a traditional roller chain. Parameters included a pitch of 25.4 mm and a rotational speed of 400 r/min under a 20 Nm load.

Results and Discussion

The comparative analysis revealed a stark difference in performance. The traditional roller chain exhibited a maximum lateral fluctuation of 1.22 mm. In contrast, the new double-pitch silent chain limited this fluctuation to just 0.27 mm.

Statistically, the lateral fluctuation of the traditional chain was 3.5 times larger than that of the silent chain. Furthermore, the standard deviation of these fluctuations dropped from 0.593 (roller) to 0.184 (silent), indicating significantly more consistent movement. These results suggest that the time-shared meshing theory effectively divides and dampens the impact energy, leading to a smoother conveying process.

Conclusion

The proposed double-pitch silent chain successfully combines the lightweight benefits of double-pitch designs with the high-stability characteristics of silent chains. By mathematically optimizing the M-plate geometry to implement time-shared meshing, lateral fluctuations are drastically reduced. This design holds significant promise for high-precision industrial conveying applications where stability is paramount.

Summary updated

Abstract

In order to reduce the lateral fluctuate in the conveying process of double-pitch roller chain for conveyors and implement smooth and steady conveying and based on the engagement theory and design method of silent chain, a new type of double-pitch silent chain for conveyors was proposed. Its chain plate was designed and analyzed its time-shared meshing theory and the reason of lateral fluctuates. and when rotating speed &omega = 400 r/min, rotational resisting moment T = 20 Nm, a compared simulation tests between the new double pitch silent chains for conveyors and traditional double pitch roller chains for conveyors about lateral fluctuate values had been done. The analysis results show that the lateral fluctuate value of double pitch silent chain was largely smaller than the double-pitch roller chain’s and the design could improve the conveying conditions distinctly. Therefore, the design of double-pitch silent chain for conveyors has value of application.
BibTeX
@inproceedings{wang2013design,
  author = {Wencheng Wang and Xiaolun Liu and Jiajun Liu and Jianfang Liu and Lu Jiguang and Bin Ye},
  title = {{The Design and Lateral Fluctuate Analysis of a New Double-Pitch Silent Chain for Conveyors}},
  booktitle = {Research},
  year = {2013},
  doi = {10.19026/rjaset.6.4101},
}

Loading related content...

Figure