The Crystallization and Melting Behavior of Neodymium-Based Butadiene Rubber Blends

Xiaofan Li, Xiaohu Zhang, Huan Ji, Yanxing Wei, Xinzheng Xie, Wenbin Zhu, Jifu BiPolymers 2024 · DOI

TL;DR

This study explores how adding poly(butadiene-isoprene) copolymer rubber (BIR) and TDAE oil affects the crystallization and melting of neodymium-based butadiene rubber (Nd-BR). The researchers found that these additives lower crystallization temperatures and can lead to dual melting peaks, indicating different crystalline structures, with TDAE oil having a more significant impact. This work provides a deeper understanding of Nd-BR's behavior at low temperatures, crucial for its application in demanding environments.

What Problem Does This Paper Address?

Neodymium-based butadiene rubber (Nd-BR) is a high-performance elastomer known for its high cis-1,4 content and linear structure. However, at low temperatures, Nd-BR can become susceptible to freezing and crystallization, leading to a loss of elasticity. This behavior limits its application in temperature-sensitive fields. To address this, understanding the crystallization and melting kinetics of Nd-BR, especially when blended with other materials, is crucial. This paper specifically investigates how common additives like poly(butadiene-isoprene) copolymer rubber (BIR) and treated distillate aromatic extract (TDAE) oil influence these properties, aiming to provide insights for optimizing Nd-BR's performance in cold conditions.

Methods

The researchers employed Differential Scanning Calorimetry (DSC) as their primary analytical tool. They performed isothermal crystallization experiments on Nd-BR and its blends with varying amounts of BIR and TDAE oil. Samples were cooled to specific crystallization temperatures and held isothermally before being heated to observe their melting behavior. To analyze the complex melting curves, particularly those exhibiting dual peaks, a multi-peak fitting approach was utilized. This allowed for the precise determination of individual melting points (Tm,1 and Tm,2) and their corresponding peak heights (h1 and h2), which serve as indicators of crystalline structure content. The study also involved calculating the equilibrium melting point (Tmº) using the Lorentz equation and analyzing the relationship between melting and crystallization temperatures.

Datasets

Not discussed in the paper. The study focuses on experimental data generated from DSC measurements of synthesized and commercially sourced materials.

Key Insights and Ideas

  • Dual Melting Peaks Reveal Structural Complexity: The observation of dual melting peaks below a critical crystallization temperature (Tc,c) is a key finding. This indicates the presence of at least two distinct crystalline structures within the Nd-BR, likely corresponding to different spherulite sizes or morphologies, which evolve with crystallization temperature.
  • Diluents Shift Crystallization Behavior: Both BIR and TDAE oil act as diluents, effectively lowering the crystallization temperature (Tc) and the melting point (Tm) of Nd-BR. This suggests they interfere with the nucleation and growth of crystals.
  • TDAE Oil is a Stronger Modifier: TDAE oil demonstrates a more pronounced effect than BIR in altering Nd-BR's crystallization and melting behavior, even at equivalent mass fractions. This is attributed to its small-molecule nature and better compatibility, leading to greater disruption of intermolecular spacing.
  • Master Curve for Quantitative Assessment: The development of a master curve by correlating peak melting temperature (Tm,peak) with crystallization temperature (Tc) provides a powerful tool for quantitatively assessing the impact of these diluents and understanding how they shift the temperature ranges for different crystalline structures.
  • Equilibrium Melting Point Reduction: The study successfully calculated the equilibrium melting point (Tmº) for various samples, revealing a significant reduction due to the presence of diluents. Pure Nd-BR has a Tmº around 0°C, which drops considerably with increasing TDAE oil or BIR content, highlighting the improved low-temperature performance potential.

Key Results

  • Nd-BR exhibits a single melting peak at crystallization temperatures ≥ -32.5 °C. Below this temperature, dual melting peaks emerge, attributed to different spherulitic sizes.
  • The addition of BIR or TDAE oil lowers the critical crystallization temperature (Tc,c) at which dual melting peaks appear. TDAE oil has a more substantial effect, shifting this transition to lower temperatures.
  • For pure Nd-BR, the equilibrium melting point (Tmº) is approximately 0 °C.
  • With 50 PHR TDAE oil, Tmº decreases to -4.579 °C.
  • With 60 wt.% BIR, Tmº decreases to -6.579 °C.
  • The Tm,peak~Tc curves for different samples can be harmonized into a master curve by shifting, indicating that diluents primarily shift the temperature range of crystallization rather than fundamentally altering the mechanism.

Limitations and Future Work

The authors acknowledge that the critical temperatures associated with different crystal types reported in the literature do not always align perfectly with their experimental DSC observations. This disparity is attributed to variations in testing methods, sample types, and potential influences of sample mixtures.

Future work could involve further detailed microscopic analysis to directly visualize the spherulitic structures corresponding to the observed melting peaks and to confirm the proposed relationship between peak heights (h1 and h2) and the prevalence of larger and smaller spherulites, respectively. Investigating the long-term stability of these modified Nd-BR materials at low temperatures and their performance under mechanical stress would also be valuable for practical applications. Additionally, exploring other types of diluents or modifiers could lead to further optimization of Nd-BR's low-temperature properties.

Summary updated

Abstract

This study investigates the influence of poly(butadiene-isoprene) copolymer rubber (BIR) and TDAE oil on the crystallization and melting behavior of neodymium-based butadiene rubber (Nd-BR). The study demonstrates that the melting points of Nd-BR and its blends decrease with lower crystallization temperatures. Below the critical crystallization temperature (<i>T</i><sub>c,c</sub>), the melting behavior shows dual peaks in distinct temperature ranges, which are attributed to different spherulitic sizes. The addition of BIR or TDAE oil lowers the <i>T</i><sub>c,c</sub>, with TDAE oil exerting a more substantial effect. These diluents mainly influence the nucleation temperature and crystallinity level of Nd-BR while having a minimal effect on the crystallization mechanism. A master curve, which overlaps for various samples, is developed by correlating the peak melting temperature (<i>T</i><sub>m,peak</sub>) with the <i>T</i><sub>c</sub>. This curve facilitates a quantitative assessment of the effects of BIR and TDAE oil on Nd-BR, highlighting the greater influence of TDAE oil on the crystalline structure compared with BIR at equivalent mass fractions. By applying the Lorentz equation and multi-peak fitting, a relationship between the melting points and crystallization temperatures is established, enabling the calculation of the equilibrium melting points (<i>T</i><sub>m</sub><sup>0</sup>) for different samples. The findings show a reduction in the <i>T</i><sub>m</sub><sup>0</sup> due to the diluents; specifically, the <i>T</i><sub>m</sub><sup>0</sup> is approximately 0 °C for pure Nd-BR, and it decreases to -4.579 °C and -6.579 °C for samples with 50 PHR TDAE oil and 60 wt.% BIR, respectively.
BibTeX
@inproceedings{li2024crystallization,
  author = {Xiaofan Li and Xiaohu Zhang and Huan Ji and Yanxing Wei and Xinzheng Xie and Wenbin Zhu and Jifu Bi},
  title = {{The Crystallization and Melting Behavior of Neodymium-Based Butadiene Rubber Blends}},
  booktitle = {Polymers},
  year = {2024},
  doi = {10.3390/polym16030342},
}
Figure