The Conversion of Li2SnO3 Li-Ion Hybrid Supercapacitors from Pastes Containing LiCl-SnCl2 Liquid Precursors Using an Atmospheric-Pressure Plasma Jet

Hongkai Chen, Heng-Min Chang, Bo-Yan Hong, Shuo-En Yu, I‐Chih Ni, Chih‐I Wu, Cheng‐Che Hsu, I‐Chun Cheng, Jian‐Zhang ChenJournal of Composites Science 2024 · DOI

TL;DR

This paper presents a novel method for rapidly converting precursor materials into Li₂SnO₃ electrodes for Li-ion hybrid supercapacitors (Li-HSCs) using an atmospheric-pressure plasma jet (APPJ). The optimized APPJ treatment significantly enhances the electrochemical performance, achieving an areal capacity of 46.113 mC/cm², demonstrating APPJ as an efficient tool for Li-HSC electrode fabrication.

What Problem Does This Paper Address?

The demand for advanced energy storage systems, such as supercapacitors and lithium-ion batteries, is rapidly growing. Li-ion hybrid supercapacitors (Li-HSCs) offer a compelling solution by combining the high power density of supercapacitors with the high energy density of batteries. However, fabricating high-performance Li-HSC electrodes, particularly those based on promising materials like Li₂SnO₃, often involves energy-intensive and time-consuming high-temperature sintering processes. This paper addresses the challenge of efficiently and rapidly converting precursor materials into functional Li₂SnO₃ electrodes suitable for Li-HSCs, aiming to overcome the limitations of traditional fabrication methods.

Methods

The researchers developed a novel fabrication process utilizing an atmospheric-pressure plasma jet (APPJ) for the rapid conversion of LiCl-SnCl₂·2H₂O precursor pastes into Li₂SnO₃ on carbon cloth. The process involves:

  • Paste Preparation: A gel-state precursor paste was prepared by mixing LiCl, SnCl₂·2H₂O, terpineol, and ethyl cellulose.
  • Screen Printing: The precursor paste was applied to carbon cloth via screen printing.
  • APPJ Treatment: The screen-printed electrodes were then subjected to a nitrogen APPJ. This treatment served a dual purpose: providing a high-temperature environment (reaching up to 620 °C) for the conversion of the precursor into Li₂SnO₃ and utilizing reactive nitrogen plasma species for electrode surface modification and binder burnout. Different APPJ processing times (0 s to 480 s) were investigated.
  • Electrode Characterization: The fabricated electrodes were characterized using various techniques, including:
  • Water Contact Angle: To assess surface hydrophilicity.
  • Scanning Electron Microscopy (SEM): To examine surface morphology and crystal growth.
  • X-ray Diffraction (XRD): To determine the crystallinity and phase purity of Li₂SnO₃.
  • X-ray Photoelectron Spectroscopy (XPS): To analyze the chemical states and surface composition.
  • Electrochemical Performance Evaluation: Li-HSCs were assembled using the fabricated electrodes and tested using:
  • Cyclic Voltammetry (CV): To measure areal capacity at different scan rates.
  • Galvanostatic Charge-Discharge (GCD): To evaluate areal capacity, energy density, and power density.
  • Cycling Stability Tests: To assess the long-term performance.

Datasets

Not discussed in the paper. The study focuses on the fabrication and characterization of Li-HSC electrodes using synthesized materials.

Key Insights and Ideas

  • APPJ as a Dual-Purpose Tool: The APPJ is not just a heating source; its reactive nitrogen plasma species play a crucial role in surface modification, enhancing hydrophilicity and potentially aiding in binder removal. This synergy is key to the rapid conversion process.
  • Hydrophilicity Boost: APPJ treatment significantly increases the hydrophilicity of the electrode surface. This improved wettability is crucial for better contact with the liquid electrolyte, leading to enhanced electrochemical performance.
  • Optimized Processing Time is Critical: The electrochemical performance shows a clear dependence on APPJ processing time. While shorter times might not fully convert the precursor, excessively long times could potentially damage the electrode structure, as suggested by the decrease in EDLC contribution. The 480 s mark appears to be the sweet spot.
  • Correlation Between Structure and Performance: The SEM and XRD results strongly correlate with the electrochemical performance. The formation of well-crystallized Li₂SnO₃ structures on the carbon cloth, facilitated by the APPJ, directly translates to improved capacity and energy density.
  • Rapid Conversion Achieved: The study demonstrates that APPJ can rapidly convert precursor pastes into functional Li₂SnO₃ electrodes, significantly reducing processing time compared to conventional high-temperature sintering.

Key Results

  • Optimal APPJ Processing Time: The best electrochemical performance was achieved with an APPJ processing time of 480 seconds.
  • High Areal Capacity: The 480 s APPJ-processed Li₂SnO₃ Li-HSCs achieved an areal capacity of 46.113 mC/cm² at a scan rate of 2 mV/s.
  • Improved Surface Properties: APPJ treatment led to increased hydrophilicity of the electrode surface, promoting better electrolyte interaction.
  • Successful Li₂SnO₃ Formation: SEM, XRD, and XPS analyses confirmed the successful conversion of the precursor into Li₂SnO₃ crystals with good crystallinity after optimal APPJ treatment.
  • Energy and Power Density: The 480 s APPJ-processed electrodes exhibited a good energy density of 5.59 µWh/cm² at a discharging current of 0.25 mA.
  • Cycling Stability: While the capacity retention decreased to 24.72% after 1000 cycles in a three-electrode system, the study highlights the potential for further optimization.

Limitations and Future Work

  • Cycling Stability: The capacity retention after 1000 cycles in the three-electrode system (24.72%) indicates room for improvement in long-term stability. The authors suggest that the difference in stability between three-electrode and two-electrode systems might be due to polarization effects.
  • Two-Electrode System Performance: While the paper presents results from both three-electrode and two-electrode systems, the focus for optimal performance is on the three-electrode setup. Further investigation into optimizing the two-electrode system could be beneficial.
  • Binder Burnout Optimization: While the APPJ process aids in binder burnout, further refinement of this aspect could potentially lead to even better electrode performance.
  • Future Directions: The authors suggest that APPJ is an effective and rapid method for fabricating Li₂SnO₃ Li-HSC electrodes and imply that this technique could be extended to other materials and energy storage devices. Further research could explore different plasma gases, APPJ parameters, and precursor compositions to optimize performance and stability.

Summary updated

Abstract

We fabricate lithium tin-based oxide Li2SnO3 on carbon cloth from a gel-state precursor containing LiCl and SnCl2·2H2O using a nitrogen atmospheric-pressure plasma jet (APPJ). APPJ treatment provides both a high-temperature environment for the conversion of precursor into Li2SnO3 and nitrogen plasma reactive species for electrode surface modification. Here, the best electrochemical performance for the Li2SnO3 Li-ion hybrid supercapacitors (Li–HSCs) is achieved with 480 s of APPJ processing. The areal capacity of the 480 s APPJ-processed Li2SnO3 Li–HSCs reached 46.113 mC/cm2. The results indicate that APPJ is an effective tool for the rapid conversion processing of Li2SnO3 electrodes for Li–HSCs.
BibTeX
@article{chen2024conversion,
  author = {Hongkai Chen and Heng-Min Chang and Bo-Yan Hong and Shuo-En Yu and I‐Chih Ni and Chih‐I Wu and Cheng‐Che Hsu and I‐Chun Cheng and Jian‐Zhang Chen},
  title = {{The Conversion of Li2SnO3 Li-Ion Hybrid Supercapacitors from Pastes Containing LiCl-SnCl2 Liquid Precursors Using an Atmospheric-Pressure Plasma Jet}},
  journal = {Journal of Composites Science},
  year = {2024},
  doi = {10.3390/jcs8050189},
}

Loading related content...

Figure