The Analysis of Energy Distribution Characteristics of Molten Pool in Welding of Aluminum Alloy with Oscillating Laser

Yuewei Ai, Yachao Yan, Yu Long, Jian ChengSustainability 2023 · DOI

TL;DR

This paper investigates how the energy distribution within the molten pool during laser welding of aluminum alloys, specifically using an "∞"-shaped oscillating laser path, impacts weld quality. They found that this oscillating pattern leads to a more uniform energy distribution, resulting in a shallower, wider weld with significantly reduced porosity compared to traditional non-oscillating laser welding.

What Problem Does This Paper Address?

Laser welding of aluminum alloys is prone to forming defects, particularly porosity, which compromises the structural integrity of the weld. These defects are often linked to instabilities in the molten pool's dynamic behavior, which in turn are influenced by how energy is distributed within that pool. Traditional laser welding, with its rapid beam movement, can create large temperature gradients, leading to these instabilities. The authors aim to improve weld quality by understanding and controlling the molten pool's energy distribution, specifically by employing an "∞"-shaped oscillating laser path.

Methods

The researchers employed a combination of experimental and numerical simulation approaches.

  • Experimental Setup: They used a 6061 aluminum alloy and conducted laser welding experiments with both a standard, non-oscillating laser and an oscillating laser following an "∞"-shaped path. Key parameters like laser power, welding speed, oscillating frequency, and amplitude were controlled and reported.
  • Numerical Modeling: A three-dimensional transient simulation model was developed to analyze the molten pool's behavior. This model incorporated a Gaussian heat source to represent the laser beam and used the Volume of Fluid (VOF) method to track the free surface. The simulation focused on calculating the energy distribution, temperature field, and fluid flow within the molten pool.
  • Data Acquisition: Weld cross-sections were analyzed using optical microscopy to assess morphology and pore defects. Longitudinal sections were used to extract pore distribution characteristics.

Datasets

The study utilized the chemical composition of 6061 aluminum alloy as a material property dataset, referencing existing literature for these values. No new datasets were introduced.

Key Insights and Ideas

  • "∞" Oscillation for Uniformity: The "∞"-shaped oscillating laser path creates a significantly more uniform energy distribution across the molten pool compared to a non-oscillating beam. This uniformity is key to stabilizing the molten pool.
  • Reduced Temperature Gradients: The more uniform energy distribution leads to lower temperature gradients within the molten pool. This is crucial because steep gradients are a primary driver of unstable fluid flow and defect formation.
  • Wider, Shallower Welds: Oscillating welding results in a shallower and wider weld profile (approaching a "U" shape) compared to the deeper, narrower "V" shape of non-oscillating welds. This change in geometry is a direct consequence of the altered energy distribution.
  • Enhanced Bubble Escape: The stabilized, more uniform flow field, characterized by more vortices, facilitates the escape of gas bubbles from the molten pool to the surface. This is the primary mechanism for reducing porosity.
  • Predictive Power of Simulation: The numerical model accurately predicted molten pool behavior and weld profiles, showing good agreement with experimental results, validating its use for further analysis.

Key Results

  • Porosity Reduction: The oscillating laser welding significantly reduced pore defects in the weld compared to non-oscillating welding. While specific quantitative reduction percentages aren't explicitly stated for the overall weld, Figure 6 visually demonstrates a dramatic decrease in pore count and density.
  • Weld Morphology: Non-oscillating welding produced a deeper, narrower "V"-shaped weld, while oscillating welding resulted in a shallower, wider "U"-shaped weld.
  • Surface Quality: Oscillating welding improved the upper surface quality, reducing spatters and creating more uniform fish-scale patterns.
  • Energy Distribution: The oscillating path spread the energy distribution over a wider range (approx. 2 mm along the Y-axis) with a lower peak energy density (approx. 1.7 × 10⁻³ kJ/mm²) compared to non-oscillating welding (approx. 1 mm range, 6.1 × 10⁻³ kJ/mm² peak).

Limitations and Future Work

  • Specific Parameters: The study focused on a specific set of parameters for the "∞"-shaped oscillating laser welding (120 Hz frequency, 1.0 mm amplitude). The authors acknowledge that different parameter combinations might yield varying results.
  • Material Focus: The research is specific to 6061 aluminum alloy. Further investigation into other aluminum alloys or dissimilar material welding would be beneficial.
  • Future Work: The authors suggest that the insights gained from this study can guide the selection of appropriate energy distribution characteristics for stable molten pool dynamics, ultimately leading to improved welding quality. Future work could explore optimizing these oscillating parameters for different applications and materials.

Summary updated

Abstract

The energy distribution in molten pool is highly related to the quality of the weld formation in aluminum alloy welding. The forming defects in the weld are often improved by adjusting the molten pool dynamic behaviors affected by energy distribution. Therefore, the energy distribution characteristics in the molten pool during the welding of aluminum alloy with oscillating laser in the “∞” shaped path are explored in this paper. The pore defects are found to be greatly reduced in welds from the oscillating laser welding of aluminum alloy compared to those from non-oscillating laser welding. The corresponding distribution characteristics of energy in the molten pool of welding with oscillating laser are obtained and analyzed. The dynamic behaviors and forming process of welds under welding conditions of different distribution characteristics of energy in the molten pool are discussed. The obtained results are in good agreement with the experimental results. Therefore, the proposed method can provide the desired energy distribution for stable dynamic behaviors of molten pool to improve welding quality.
BibTeX
@inproceedings{ai2023analysis,
  author = {Yuewei Ai and Yachao Yan and Yu Long and Jian Cheng},
  title = {{The Analysis of Energy Distribution Characteristics of Molten Pool in Welding of Aluminum Alloy with Oscillating Laser}},
  booktitle = {Sustainability},
  year = {2023},
  doi = {10.3390/su15086868},
}
Figure